Special Zips – Waterproof, Reflective, Two-Way, Flame-Retardant and More

Polkom · 4 min read
Special Zips – Waterproof, Reflective, Two-Way, Flame-Retardant and More

Special zips are zips with an extra function beyond ordinary fastening: keeping water out, being visible in the dark, opening from both ends, withstanding high temperatures or staying invisible. They are used in outdoor and workwear, children's clothing, furniture, footwear and technical products. The right choice starts with the question of what exactly the zip has to do in the product.

Types of special zips

TypeWhat makes it specialTypical use
Waterprooftape with a polymer coating, the coil is on the insidejackets, ski trousers, backpacks, covers
Reflectivereflective piping or tape next to the chainworkwear, cycling, children's jackets
Two-waytwo sliders, opens from the top and the bottomlong jackets, coats, sleeping bags
Flame-retardantmaterials that do not sustain burningprotective clothing, uniforms
Reverse coilthe coil is on the inside, a smooth tape shows on the outsidesports and fashion jackets, hoodies
Invisiblethe chain is turned inwards, only the pull showsdresses, skirts, cushion covers
Continuous zipa continuous chain, sliders are fitted separatelymattresses, upholstery, tents, series production
With two sliders "head to head"the sliders meet in the middlesuitcases, holdalls, covers

Waterproof zips

The tape is coated with a polyurethane or similar layer, and the coil is usually turned inwards so that a smooth surface remains on the outside. Such a zip greatly reduces water penetration but does not make the product fully watertight – the seams around it must also be sealed with tape. The best-known example is the YKK waterproof zips of the AquaGuard® series.

When choosing, pay attention to curves: waterproof zips are stiffer and are not recommended for strongly curved openings.

Reflective zips

Here a reflective element is built into the tape or into a piping next to the chain. The zip becomes part of the garment's visibility system – especially useful in workwear, cycling jackets and children's clothes for school. If the product has to meet a high-visibility standard, check the standard's requirements for the reflective areas, not just for the zip.

Two-way and open-ended zips

A two-way zip has two sliders and lets the garment be unzipped from the bottom when sitting or cycling. It is usually combined with an open end so that the jacket can be opened completely. On long coats, parkas and sleeping bags it is almost a must.

Flame-retardant zips

These are used in protective clothing, where all components must behave similarly at high temperatures. What matters is the tape, the seam thread and the slider material. When the product is certified to a specific standard, the requirements for the zip are defined together with the documentation of the end product.

Reverse coil and invisible zips

A reverse nylon coil zip gives a modern, clean look – the coil is on the inside and only the tape shows on the outside. Invisible zips go one step further: once sewn in, only the small slider pull is visible from the outside. They are the standard for dresses, skirts and cushion covers.

Special zips by application

Outdoor and sport

  • waterproof zips for outer pockets and the front;
  • two-way zips for long jackets and sleeping bags;
  • large slider pulls that are easy to use with gloves.

Workwear

  • moulded-tooth or metal zips in a large size number for heavy loads;
  • reflective elements;
  • flame-retardant versions for protective clothing.

Children's clothing

  • smooth sliders without sharp edges;
  • a zip garage at the top end that protects the chin;
  • light nylon coil zips that do not weigh the garment down.

Furniture and home textiles

  • continuous zip and separate sliders for covers and mattresses;
  • invisible zips for decorative cushions.

Footwear and bags

  • sliders with an automatic lock for boots;
  • two sliders "head to head" for suitcases and holdalls.

How to describe special zips in an enquiry

With special zips it is particularly important for the enquiry to describe the function, not just the type. State:

  1. the product and conditions of use – rain, cold, abrasion, washing, high temperature;
  2. the required function – water resistance, visibility, two-way opening, invisible fitting;
  3. size number, length and type of end;
  4. colour of tape and slider – to a shade card, Pantone or a sample;
  5. slider – locking, pull, logo;
  6. the standard, if the product is being certified;
  7. quantities per length and colour.

If you are torn between two options, ask for samples of both and test them on a prototype. With special zips the prototype must go through real conditions – rain, washing, repeated opening with gloves – not just a visual check. Record the results and attach them to the approved sample so that the requirements are clear for future orders as well.

Common mistakes when choosing special zips

  • Waterproof zip without sealed seams. Water gets in alongside the zip, not through it – so the seams and the storm flap are just as important.
  • Stiff zip in a curved opening. Coated tapes are stiffer and, on a sharp curve, deform or open with difficulty.
  • Two-way zip without room at the bottom. The second slider needs a little more space at the lower end of the pattern.
  • Flame-retardant zip with ordinary thread. The protection only works if all components in the seam behave similarly.
  • Invisible zip on a thick fabric. On heavy materials an invisible zip is hard to close; a regular nylon coil zip under a flap works better.
  • Approval without a prototype. The special function can only be checked in a sewn product under real conditions.

Most of these mistakes can be avoided if you describe the product and the conditions of use right in the enquiry.

Special zips from Polkom

Polkom is a manufacturer of accessories for fashion, footwear and bags from Sofia with over 30 years of experience. Our range of zips includes standard and special designs, original YKK zips and SAB zips, as well as sliders and zip pullers with a logo. We offer an OEKO-TEX® certificate for all products. Minimum quantities depend on the article. Describe the product and the function of the zip via the contact page and we will suggest a suitable option and samples.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

How waterproof is a waterproof zip?
A waterproof zip greatly reduces water penetration from rain and splashes, but it is not designed for immersion. The result also depends on the product – the seams around the zip must be sealed and a storm flap is often placed over it. For watertight products such as dry bags and diving suits, separate specialised closure systems are used.
Can a special zip be made in the brand colour?
For many special zips the tape colour can be chosen from a shade card or brought close to a sample. With some types, such as waterproof zips, the coating affects the shade and the sheen, so it is important to approve a physical sample. The slider and pull can also have a different finish or a logo. Minimum quantities depend on the type.
Can I replace a regular zip with a special one in an existing design?
Often you can, but check the pattern. Waterproof and flame-retardant zips are stiffer, and two-way zips need room for the second slider at the bottom end. The tape width and the sewing method may also differ. It is best to sew a prototype with the special zip before changing series production.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.