Contents
A button price cannot be given as a single figure, because the cost of a button is determined by five main factors: material, size, type and finish of the surface, customisation (logo, colour matched to a sample) and quantity. A polyester button from stock and an engraved corozo button of the same diameter are two different products with different production costs. If you know how much each factor weighs, you will request a quote that you can genuinely compare with others.
Button prices by material
Material is the first dividing line. It determines not only the raw material but also the technology – whether the button is cast, turned, stamped or covered.
| Group | What drives the price |
|---|---|
| Polyester and plastic | Type (classic polyester or imitation horn), number of turning operations, effects (marble, pearl, horn), dyeing |
| Urea | Compression moulding, resistance to high temperatures, colour |
| Metal | Alloy (brass or zinc alloy), mould, electroplated finish, enamel |
| Snap buttons | Number of parts, metal or plastic, finish, logo cap, setting die |
| Natural (corozo, mother-of-pearl, horn, bone, coconut, wood) | Quality and grading of the raw material, manual labour, reject rate during processing |
| Fabric-covered | Type of blank, size, customer’s fabric or fabric from stock, manual or machine processing |
You will find an overview of all groups in the clothing buttons category. For mass-produced clothing, the most budget-flexible choice is usually among the polyester buttons.
Size, thickness and shape
Buttons are measured in lignes (1L = 0.635 mm). Shirt buttons are around 14–18L, blazer buttons 24–32L, coat buttons 36L and up. With every larger size the amount of material increases, but the price does not rise in a straight line: with natural materials a larger diameter requires thicker and rarer raw material. Thickness, profile (flat, domed, rimmed) and shape (round, square, toggle) also change the number of operations. A non-standard shape almost always means a new tool.
Finish and plating
- Matte or gloss. Barrel polishing is a separate operation; a high gloss takes more time.
- Electroplating. For metal buttons, nickel colour (nickel free), antique gold, bronze or black nickel colour each have a different technology and a different cost.
- Effects. Two-colour casting, pearl or marble effects, patina and hand colouring add steps.
- Colour matched to a sample. Dyeing to the fabric colour requires laboratory matching and approval.
Logo and customisation
Laser engraving on a standard button only requires a file and a set-up, so it is the easiest entry point for a small brand. A raised logo on metal or cast buttons requires a mould – a one-off investment spread over all the pieces. The larger the run, the less the mould weighs in the unit price. You will find more about the options on the logo branding page and in the engraved buttons category.
Snap button prices and the cost of covering buttons
Two groups are often searched for separately because their logic is different.
Snap buttons
A snap button consists of four parts (cap, socket, stud, post). The price depends on the metal or plastic, the finish, the size and whether the cap carries a logo. There is also a hidden cost: the right die for the press. If the factory does not have a suitable die, one must be provided, otherwise the risk of snaps coming undone and of rejects increases. See the types under snap buttons.
Fabric-covered buttons
When buttons are covered with fabric, the price depends on the size of the blank, whether it has a shank or a sew-through base, the type of fabric (thin silk is harder to work with than wool) and the quantity. If the customer supplies their own fabric, they should allow a reserve for cutting and tests.
Wholesale buttons: the role of volume
With wholesale buttons, the unit price falls as the quantity grows, because the preparation – set-up, mould, colour test, packing by style – is spread out. A small order of many styles with a few pieces each costs more per piece than the same volume in two or three styles. It therefore makes sense to combine quantities when the same button is used in several styles of the collection. Minimum quantities depend on the article – send an inquiry.
How to request a comparable quote
The most common reason quotes seem impossible to compare is that each supplier offers a different product for the same description. Send the same specification to all of them:
- Material and style (or a photo and sample).
- Size in lignes or mm and number of holes or shank.
- Colour – Pantone, fabric sample or catalogue code.
- Finish – matte, gloss, plating for metal.
- Logo – file, position, engraving or raised.
- Quantity per size and colour.
- Document requirements – for example OEKO-TEX®.
- Delivery address.
Also ask what the quote includes: sample, mould, packing by style. A button looks cheaper until these items are added.
Where clothing buttons cost more than they seem
A cheap button can turn out to be expensive: if it breaks in the button-attaching press, if the plating peels off in the wash or if the colour does not match the fabric and the batch is returned. A single complaint about finished garments costs many times more than the difference between two button options. So compare not only the unit price but also durability under ironing, washing and dry cleaning.
A button quote from Polkom
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags from Sofia with over 30 years of experience. We offer buttons from stock and to order – with logo, in colours matched to a sample and in non-standard sizes, with fast samples and delivery throughout the EU. Send your specification via the request a quote form and you will receive a specific proposal.
Share this article














