Custom Logo Rivets – From Design to Serial Production

Polkom · 4 min read
Custom Logo Rivets – From Design to Serial Production

Custom logo rivets are made by embossing or debossing the brand mark, engraving it, or printing it around the rivet cap’s circumference. The process involves preparing a vector file, selecting size and plating, producing and approving samples, and then serial production. Simple logos with clear shapes work best, as the rivet cap surface is small.

Why choose custom logo rivets

The rivet is one of the few metal details repeated multiple times on a single item – on jean pockets, bag handles, belts. When each rivet carries the brand mark, the product instantly looks finished and recognizable. Branded rivets are used by denim brands, workwear, bags, and leather accessories, often as part of a coordinated set with belt buttons and a metal logo plate.

Techniques for logo on rivets

Embossed stamping

The logo is raised above the cap surface. This classic method is highly visible, pleasant to touch, and with antique plating, the embossing stands out more due to shadowing in the recesses.

Debossed stamping

The logo is recessed into the cap. It looks more discreet and elegant, suitable for minimalist brands.

Laser engraving

Ideal for small runs and fine details, or when the logo needs changing without a new die. Engraving creates contrast by removing part of the plating.

Text around the circumference

The brand name runs along the rivet cap’s edge, with a symbol, star, or the rivet hole in the center. A classic denim look.

Technique comparison

TechniqueAppearanceSuitable for
Embossed stampingRaised, voluminousMass production, denim, bags
Debossed stampingRecessed, discreetMinimalist collections
Laser engravingContrasting, fineSmall runs, complex details
Text around circumferenceText on edgeClassic denim style

How to prepare your logo

  • Vector file. Send the logo in AI, EPS, PDF, or SVG format with text converted to outlines.
  • Simplify. Thin lines, small letters, and gradients do not reproduce well on a rivet cap just a few millimetres in diameter. Prepare a version with only the main shapes.
  • Monochrome. Stamping creates shape, not colour. The logo must work in one colour through relief and shadow.
  • Orientation. Indicate if the logo should be horizontal when placed – this affects assembly for caps with text.

Size and plating of custom logo rivets

The more complex the logo, the larger the cap required. A classic denim rivet of about 8–9 mm diameter can fit a short name around the edge and a symbol in the center. Larger caps with more detail are used for bags and workwear. Plating is chosen according to the collection – copper and antique copper for classic denim, nickel colour and gunmetal for black denim, gold and brass for bags. Antique finishes highlight embossing and are preferred for branded rivets.

Choose metal buttons in the same plating and with a matching logo style from our metal buttons to complete the set.

Ordering process step by step

  1. Inquiry. Send your logo, desired size, plating, product type, and approximate quantity.
  2. Technical proposal. Receive a model suggestion, cap size, technique, plating options, and visualisation.
  3. Die and sample. After approval, the tool is made and first samples produced.
  4. Testing. Test samples on your fabric and press, and wash according to the garment’s care instructions.
  5. Serial production. Production starts after written sample approval.

Custom logo rivets for different products

For denim, branded rivets usually come as a set with belt buttons and leather labels, with the logo around the edge visible up close. Workwear rivet logos tend to be bolder and simpler due to larger caps and harsher use. Bags and belts often use double-sided rivets, with the logo on one or both sides. Children’s collections prefer smaller, smooth rivets with shallow relief and no sharp edges. Specify the product type in your inquiry to receive a suitable proposal.

What affects the price

The price of custom logo rivets depends on material and weight, cap size, logo complexity and technique, plating type and quantity, die production, and total order volume. Larger runs spread the die cost over more pieces. Send a request for a quote with your specifics – minimum order quantities depend on the model.

Storage and reorders

Once the die is made, reorders of the same model are faster and more predictable. Keep the approved sample as a reference for tone and relief when accepting future batches. If you plan changes to the logo or plating, discuss in advance – sometimes tool adjustments are possible instead of a new die.

Common mistakes when ordering custom logo rivets

  • Logo too detailed for the small cap size;
  • Approving only visualisations without physical samples;
  • No washing test on denim – plating changes;
  • Different tone from buttons and zips ordered elsewhere;
  • Unsuitable rivet post length for fabric thickness.

Wholesale custom logo rivets from Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear, and bags with over 30 years of experience. We produce custom logo rivets to your design, as well as coordinated sets with buttons, logo plates, and leather labels, offering fast samples and delivery across the EU. Browse standard models in the rivets category and send your logo via the contact page.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What file format is needed for custom logo rivets?
A vector file is best – AI, EPS, PDF, or SVG with text converted to outlines. Raster images like JPG or PNG can serve as a reference, but the logo must be vectorised before die production. For very fine details, prepare a simplified version that stamps clearly on the small cap.
Can I see a sample before production?
Yes, the sample is a mandatory step. After approving the visualisation, the tool and first real-size rivets with plating are made. Test them on your press and fabric, and wash denim samples. Serial production starts only after sample approval.
Can one logo be used for both rivets and buttons?
Yes, this is common. Belt buttons and rivets are made in the same plating and with a matching logo style, adapting the logo size to each detail. This ensures a unified set. Specify all branded details in your inquiry for a coordinated solution.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.