Contents
Mailer boxes with logo are self-assembly corrugated boxes with a lid and side tuck flaps that close without tape and withstand courier delivery. For an online clothing shop, E flute is most often chosen for T-shirts and underwear and B flute for heavier parcels, in white or kraft board, printed outside, inside or on both sides. The size is set by the folded item, and an adhesive return strip makes sending the parcel back easy.
What a mailer box is and how it differs
A mailer box is die-cut from a single sheet of corrugated board and delivered flat. On assembly, the lid folds over the body and its tuck flaps slot into the sides, holding the box closed. It combines two roles: a shipping package that protects the garment in the courier network, and a showcase for the brand at the moment of opening.
A rigid gift box with lid and base or with a magnetic closure is a different product – more luxurious, but heavier, bulkier to store and usually shipped in an additional outer carton. The types of rigid boxes are described in the article cardboard boxes for clothing – types.
Corrugated board: E or B flute
Corrugated board consists of flat liners and a fluted middle layer. The flute height determines the thickness, strength and print quality.
| Flute | Thickness (approximate) | Advantages | Suitable for |
|---|---|---|---|
| E flute | about 1.5 mm | thin, smooth surface, very good print | T-shirts, underwear, accessories, light parcels |
| B flute | about 3 mm | stronger under compression, protects corners better | hoodies, jeans, jackets, shoes, sets |
For most online clothing shops, E flute is sufficient and looks more elegant. Choose B flute when the parcel is heavy, the box is large or many boxes are stacked on top of each other in the warehouse.
White or kraft board
- Brown (kraft) board – a natural look that suits brands focused on sustainability; dark print colours look best on it.
- White board – a clean base for bright colours and photographic images; Pantone colours are reproduced more accurately.
- Kraft outside, white inside – a discreet exterior and a vividly branded interior.
Mailer boxes with logo: outside and inside print
The outside print works in the courier network and at the customer's door, the inside print at the moment of opening. A common approach is a minimal logo outside and a richer design, a message or a QR code to the website on the inside of the lid. The parcel keeps its contents discreet on the way, and the unboxing stays memorable.
- One- or two-colour Pantone print is the most economical and keeps the natural look of the board.
- Full-colour print suits campaigns and seasonal collections.
- Matt or gloss varnish protects the print from rubbing in transit.
- Leave a free area for the courier label so that it does not land on the logo.
Sizes by item
Dimensions are given as internal: length × width × height. Fold the garment as it will be shipped, together with the tissue paper and inserts, and measure. Approximate internal dimensions:
| Item | Internal dimensions (approximate) |
|---|---|
| Underwear, socks, accessories | 20×15×5 cm |
| T-shirt, shirt | 25×20×5 to 30×22×6 cm |
| Hoodie, jumper, jeans | 35×25×8 to 38×28×10 cm |
| Shoes in their own box | 36×26×14 cm and more |
A box that is too large needs void fill and increases the volumetric weight charged by the courier, while one that is too small creases the garment. Most brands manage with two or three standard sizes for the whole range.
Closure and return strip
The tuck flaps hold the box closed, but for courier delivery a self-adhesive strip is often added along the edge of the lid. A second return strip is handy in fashion, where returns are frequent: the customer opens the box with a perforated tear strip and, if needed, closes it again with the second strip, with no tape required. State in your inquiry whether you need one strip or two.
Recyclability
Corrugated board is one of the easiest packaging materials to recycle. Choosing kraft board, water-based inks and a closure free of plastic tape makes the box easier to sort for recycling. Recycled versions of the material are available on inquiry. A short note on the box saying it goes in the paper recycling is a good idea.
Common mistakes with mailer boxes
- Dimensions measured outside instead of inside – the garment does not fit together with the tissue paper.
- Too many sizes – the warehouse struggles and order quantities get spread thin.
- The logo is placed where the courier sticks the shipping label.
- B flute for light T-shirts – the box is heavier and bulkier with no real need.
- No return strip, so customers send the goods back in the same box sealed with tape.
What to include in your inquiry
- The items and the internal dimensions of the boxes.
- The flute type (E or B) or the weight of the parcels.
- The board colour outside and inside.
- The logo and the design for the outside and inside, with Pantone colours.
- The closing and return strips.
- The quantity per size and how often you order.
If you are preparing a complete look for your parcels, browse the other logo packaging too – tissue paper, stickers and bags in the same palette.
Mailer boxes from the manufacturer Polkom
Polkom is a manufacturer of packaging and fashion accessories with its own production in Sofia. We make custom cardboard boxes with logo, including mailer boxes for online shops, together with the labels and packaging of the collection. The minimum quantity and samples depend on the article, and production takes 10–20 days after the design is approved. Send the dimensions and your logo, preferably as vector PDF, through a request for a quote.
Share this article














