Custom Rings with Logo – How They Are Made for a Brand

Polkom · 4 min read
Custom Rings with Logo – How They Are Made for a Brand

Custom rings are made when the standard shape or size does not fit the style, or when a brand wants its own recognisable metal accessories. Most often these are die-cast zinc alloy rings with an embossed or engraved logo, a non-standard profile or a specific finish. The process goes through a technical drawing, mould making, a sample and the production run.

When custom rings are worth ordering

  • Recognisability. When the ring is a visible element of the bag or belt and the brand wants it to carry the logo or a distinctive shape.
  • A non-standard size. When the strap has an unusual width or thickness and standard rings do not fit.
  • Matching metal accessories. When the rings must follow the shape of buckles, plates and pullers from the same collection.
  • Protection against copying. Your own metal accessories make imitations harder and reinforce the sense of quality.

Technologies for making custom rings

Zinc alloy die casting

This is the most flexible technology for branded rings. A mould (die) is made, into which molten zinc alloy is cast. Practically any shape can be produced this way: a flat or bevelled profile, a wide face, a built-in raised or recessed inscription. The castings are then cleaned, polished and finished.

Bending wire into a non-standard shape

For simple geometric shapes – a rectangle with specific proportions, a particular triangle, a D with a longer straight side – rings can be bent from wire to order. A logo cannot be added directly here, but the shape and thickness can be unique.

Engraving a finished ring

The logo can be laser engraved on a flat part of a standard ring. This suits smaller runs and cases where the shape does not need to be unique. Engraving works best on a flat profile with a sufficiently wide surface.

Stamping from sheet

Flat rings with a logo can be cut and stamped from metal sheet. The method suits thin items and rings that are part of a label or plate.

A logo on the ring – what to bear in mind

  • Size of the part. The ring is small, and the logo on it even smaller. Thin lines and small text may not cast cleanly. A simplified version of the logo often looks better.
  • Raised or recessed. A raised logo is more visible but wears faster from friction with the strap. A recessed one is more durable.
  • Position. The logo should be on a part that is visible and not covered by the strap – usually on the front of the curve.
  • Finish. Some finishes fill in fine details. With an antique finish, the darker tone stays in the recesses and emphasises the logo.

How the order runs step by step

  1. Brief. You send a sketch or reference, the width and thickness of the strap, the desired material, finish, the logo in vector format and an approximate quantity.
  2. Technical drawing. The dimensions, profile, position and depth of the logo are defined.
  3. Mould making. For cast rings, a die is made – a one-off investment that is then used for repeat orders.
  4. Sample. You receive a physical sample, which you check with the real strap and material.
  5. Approval and production. After the sample is approved, series production and finishing begin.
  6. Inspection and delivery. The rings are checked for size and finish and delivered to your factory.

What determines the price

The price of custom rings cannot be stated in advance, because it depends on several factors:

  • the technology – casting, bending, engraving or stamping;
  • the complexity and size of the shape and the need for a new die;
  • the material and weight of the ring;
  • the type of finish and the number of colours;
  • the quantity – with larger runs the mould cost is spread over more pieces.

For a specific price, send a quote request with the details above.

Coordinating with the other branded metal accessories

A logo ring is rarely a stand-alone element. The strongest effect is achieved when all the metal accessories in a collection are designed together: metal buckles, metal logo plates and tags, zip pullers and charms, rivets. A common style, one finish and the same brand mark turn small metal details into a recognisable signature.

Finishes for logo rings

The choice of finish is as important as the shape. Polished finishes such as high-gloss gold and chrome emphasise the shine but show fingerprints and scratches. Matte and satin finishes look more contemporary and hide signs of use. Antique finishes (antique brass, antique silver, antique copper) leave a darker tone in the recesses and make the logo more legible. Black and gunmetal finishes are popular for men's accessories and sports collections. For larger runs, a finish colour-matched to a sample is also possible, to match the colour of the leather or textile. All Polkom metal finishes are nickel free.

If the collection includes other metal details, ask for all of them to be finished in one batch. Even with the same finish name, the shade can differ slightly between production cycles.

Common mistakes when ordering logo rings

  • A logo too detailed for a small surface.
  • No test of the sample with the real strap.
  • A logo in a place covered by the strap or snap hook.
  • Ordering the rings separately from the buckles, with a difference in finish shade.
  • Not sending a vector file, which delays preparation of the drawing.

Custom rings from Polkom

Polkom is a Bulgarian manufacturer of haberdashery and accessories for fashion, furniture, footwear and bags, based in Sofia, with over 30 years of experience. We make rings and other metal accessories to the customer's design and with their logo, produce samples quickly and deliver throughout the EU. Minimum quantities depend on the article and technology. Send an inquiry with your idea and we will suggest a suitable solution.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can a logo be put on a standard ring?
Yes, if the ring has a sufficiently wide flat surface, the logo can be laser engraved. With a round profile and thin wire, engraving is difficult and does not look good. For a more visible and durable logo, a die-cast zinc alloy ring with a raised or recessed logo, made to your drawing, is recommended.
What logo file should I send?
It is best to send the logo in vector format, for example AI, EPS, PDF or SVG. That way the lines scale without loss and can be transferred directly into the technical drawing. If the logo has very fine details, also prepare a simplified version, because thin lines may not cast cleanly on the small surface of the ring.
Can I repeat the order for logo rings later?
Yes, once a mould has been made for the ring, it is stored and can be used for repeat orders of the same style. This makes additional runs easier and keeps the metal accessories consistent across collections. For a repeat order, it is best to state the style number and the finish from the previous delivery.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.