Contents
Wide hook and loop tape – tapes from 50 to 100 mm – is the solution when a closure has to withstand weight, tension and frequent use. In garment production it is also called industrial hook and loop, because it is used mainly in technical textiles, covers, awnings, medical products and equipment rather than in everyday clothing. Polkom offers hook and loop tape in widths from 5 to 100 mm, and the two parts – the hook side and the soft loop side – are available separately or as a mated set.
When you need wide hook and loop
The strength of the closure depends on the area where the hooks and loops meet. For the same length, a 100 mm tape gives several times the area of a 20 mm tape. That is why wide hook and loop is chosen when:
- the closure takes weight or constant tension – for example the flap of a heavy bag or a tightening strap;
- the product is opened and closed many times a day;
- a large area has to be covered, such as a flap, panel or detachable part;
- adjustment over a wide range is needed, without buttons or buckles.
You will find a general overview of all widths in the article hook and loop tape widths.
Uses of industrial hook and loop
| Width | Typical products |
|---|---|
| 30–50 mm | bags, backpacks, outdoor equipment, protective and medical products |
| 50–60 mm | orthopaedic belts and supports, tightening straps, tool cases |
| 60–100 mm | technical products, covers, awnings and sunshades, machine covers, advertising and exhibition solutions |
Technical textiles and covers
Machine covers, equipment cases, protective panels and flaps close quickly along their whole length. A wide tape spreads the load and keeps the edge from peeling open in wind or under vibration.
Awnings, sunshades and covers
On awnings, hook and loop is used to join panels, to attach side walls and as flaps over zips. For openings that ropes and pegs pass through, it is combined with eyelets.
Medical and orthopaedic products
Supports, splints and belts need a strong yet soft closure that allows fine adjustment. You can read more about the requirements in this field in the article hook and loop for medical products.
Equipment, outdoor and transport
Backpacks, cases, vests, straps and organisers in cars and boats rely on stiffer, stronger tapes that hold even in damp and dusty conditions.
Types of tape for heavy-duty products
- Standard sew-on tape – the main choice for technical textiles.
- Stiffer, stronger tapes – for bags and equipment under heavy load.
- Softer versions – for medical products and anything that touches the skin.
- Back-to-back tape – hooks and loops on the same tape; practical for tightening straps and cable ties.
We explain whether to choose sew-on or self-adhesive tape in the article sew-on or self-adhesive hook and loop.
Sewing wide hook and loop in production
Wide tape is sewn on the same principle as narrow tape, but mistakes are more visible. Practical rules from the sewing room:
- sew around the whole edge, 1–2 mm from the border, with a straight or zigzag stitch;
- for tapes over 50 mm add one or two lengthwise seams down the middle so the tape does not bulge;
- reinforce the points of highest load with a cross seam or a box-and-cross stitch;
- use a strong synthetic thread suited to technical products – see our technical threads;
- round off the corners of cut pieces so they do not lift or snag.
The process is described step by step in the article how to sew on hook and loop.
Common mistakes with wide hook and loop
- Tape wider than the product – if the tape is almost as wide as the flap, the edges fold and the tape peels open when bent; leave at least a few millimetres of free fabric around it.
- Stitching only along the edges on 100 mm tape – the middle of the tape bulges and the closure loses area; add lengthwise seams.
- Soft side in the wrong place – the soft loop side goes where the tape may touch the skin or other materials; the stiff hook side goes on the movable flap. More in the article on which side of hook and loop tape is sewn where.
- Washing with the tape open – the hooks collect fibres and lose grip; close the tape before washing.
By the metre, on rolls or cut to length
For series production, wide hook and loop is usually ordered on rolls. The two parts can be delivered separately if they are sewn in different operations, or as a mated set if they are cut together. On request we also prepare pieces cut to a set length. Details are in the article hook and loop wholesale and by the metre.
Colour
Besides black and white, hook and loop tape can be produced in practically any Pantone colour or matched to a sample – to blend in with the fabric or to become a visible functional accent, for example on equipment and high-visibility products.
How to order wide hook and loop from Polkom
Send us the width, the colour, which part you need (hook, loop or set), the product the tape is for and the approximate quantity. We will suggest the right type of tape and send a sample. We deliver across Europe and can combine the hook and loop with threads, tapes and other haberdashery in one shipment. Browse Polkom's hook and loop tapes.
Share this article














