Metal logo plate for bags with pins and back plate – press-fitted, no stitching or glue

Polkom · 2 min read
Metal logo plate for bags with pins and back plate – press-fitted, no stitching or glue

A metal logo plate for bags is the quickest way to make your brand visible from across the room – on the flap, the front panel or next to the handles. Polkom is the manufacturer of metal bag logos made to your own logo: in any design and shape, any colour and finish, and any type of execution. The piece in the photos is a polished gold monogram, secured from behind with a metal back plate and pressed on with a die.

How the logo is built

The logo consists of two parts that work together:

  • front piece – the logo itself, with relief and a polished surface; on the back it has four pins (prongs);
  • back plate – a flat metal plate cut to the outline of the logo, with four holes lined up exactly with the pins;
  • die pressing – the pins are flattened onto the plate and form solid rivet heads.

Fitting step by step

  • Four small holes are punched into the bag material using a template taken from the logo.
  • The front piece is placed on the outside and the pins go through the leather, faux leather or fabric.
  • The back plate is placed on the inside so that the pins pass through its holes.
  • A die presses the pins onto the plate – the logo is fixed permanently and does not rotate.

You can read more about the different attachment methods – prongs, rivets and stitching – in our article on attaching metal plates – prongs, rivets, stitching.

Why a back plate instead of glue or stitching

  • no stitching and no glue – no visible seam around the logo and no adhesive that can dry out or come loose;
  • secure hold – the load is spread across the whole plate, not just the four points;
  • clean inside – on the inside of the bag you only see a smooth plate with neat rivet heads;
  • exact position – the four pins keep the logo straight and aligned on every piece in the series.

If you are still deciding where and how to place the plate on the bag, see our general guide to the metal plate for bags.

Any design, any colour, any finish

The logo in the photos is just one example. We make the metal logo entirely to your design:

  • design and shape – monogram, initials, lettering, emblem or figure made from your drawing;
  • colour and finish – gold, light gold, rose gold, nickel, gunmetal, black, antique silver and many more – see our colour and finish chart;
  • surface type – high-polish shine, matt, brushed effect, relief, with or without enamel;
  • size and fastening – the number and position of the pins and the shape of the back plate are matched to the logo and to the thickness of the material.

For plates with coloured enamel see enamelled metal logo plates for bags, and before you send your artwork, read about the most common mistakes when ordering metal logo plates.

Which products it suits

  • handbags and clutches;
  • backpacks and sports bags;
  • wallets and small leather goods;
  • suitcases, travel bags and laptop bags;
  • any item in leather, faux leather or heavy fabric on which the brand needs to be visible.

Orders, samples and lead times

  • Minimum order: 1000 pcs per design
  • Samples: 50–100 € before mass production
  • Production time: 10–20 days, delivery throughout Europe
  • Quality: all metal parts are nickel free, products certified to OEKO-TEX® Standard 100

Browse more designs in the metal plates category and matching metal buckles for the same bag. Send us your logo via our contact page and we will prepare a sample.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

How is the metal logo attached to the bag?
The front piece has four pins that pass through the bag material. A metal back plate with four holes is placed on the inside, and the pins are then pressed on with a die. The logo is held securely without stitching or glue.
Can the logo be made to my design?
Yes. The metal logo is made to your own logo – in any design and shape, any colour and finish, with a polished, matt or enamelled surface. Send us your logo in vector format or as a PDF.
Which materials is it suitable for?
Genuine and faux leather and heavy fabrics used for bags, backpacks and wallets. The pin length and the shape of the back plate are matched to the thickness of the material.
What are the minimum order and lead time?
The minimum order is 1000 pcs per design. Samples cost 50–100 € and are made before mass production, which takes 10–20 days. We deliver throughout Europe.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.