Snap Button Pliers or Press – Which to Choose

Polkom · 4 min read
Snap Button Pliers or Press – Which to Choose

Snap button pliers are suitable for repairs, samples and single pieces, while a hand press with dies suits workrooms and small runs. Foot-operated and automatic presses are for series production, where uniform setting and high speed are required. The choice depends on the quantity, the button style and the thickness of the fabric, but in every case the die must match the button exactly.

Snap button pliers: when they are enough

Hand pliers look like ordinary pliers but have interchangeable tips – a concave one for the cap or stud and a convex one for flaring the post. Some kits are sold with buttons and tips for several sizes, sometimes also with attachments for eyelets.

Advantages:

  • low investment and easy storage;
  • no workbench or power supply needed;
  • convenient for repairs and replacing single buttons.

Limitations:

  • the force depends on the hand – with larger buttons and thick fabrics it is hard to set them evenly;
  • a higher risk of a scratched or crushed cap;
  • slow – unsuitable for production runs;
  • universal tips fit approximately, not exactly, every style.

Pliers usually work well with open-prong snaps for jersey and with small ring snaps. For metal buttons of 15 mm and above on denim and jackets, they are often not enough.

Hand (bench) press

A hand press is fixed to the table and operated with a lever. The dies are changed according to the style and size of the button. The lever multiplies the force, so setting is even and the cap finish is not damaged. This is the most common solution for workrooms, small garment factories, makers of bags and leather goods, as well as for sample departments in larger factories.

Foot and pneumatic press

With a foot press, the operator presses with the foot while the hands remain free to position the fabric. Pneumatic models work with compressed air and give a constant force with every stroke. Some have automatic feeding of the parts from a vibrating hopper, which reduces the time per button to seconds and almost eliminates mistakes when placing the parts.

Tool comparison

ToolQuantitiesConsistencySuitable for
Plierssingle pieceslow to mediumrepairs, hobby, jersey samples
Die and hammer kitsingle pieceslowurgent repairs, leather goods
Hand presssmall and medium runsgoodworkrooms, samples, bags
Foot pressmedium and large runsvery goodgarment factories
Automatic press with feederlarge runsexcellentapparel factories

Dies: the most important part

The press only delivers the force. The result depends on the dies – the upper one (punch) and the lower one (cavity). They are selected by three parameters:

  1. Button style – ring (spring) snaps, post snaps and open-prong snaps have different dies.
  2. Size – the diameter of the cap and the socket determines the shape of the die.
  3. The pair – a separate die for the upper part (cap + socket) and for the lower part (post + stud).

That is why, when ordering buttons, it is a good idea to ask the manufacturer which die matches them and whether it can be provided. Using an "approximately suitable" die is the most common cause of defects.

How to choose a tool

  • How many buttons will you set? Up to a few dozen a month – pliers or a hand press; hundreds and thousands – a foot or automatic press.
  • What kind of buttons? Large metal buttons for denim and jackets require more force than small buttons for babywear.
  • What fabrics? Thick and multi-layer items require a stable press and an exact post length.
  • How many styles? If you work with many sizes, calculate the cost and time of changing dies.
  • Eyelets and rivets? Many presses also work with eyelets and rivets when the dies are changed – convenient if the item also has these elements.

Kits for setting snap buttons and eyelets

Retail stores offer kits containing pliers or a small hand press, several tips and a certain number of buttons and eyelets. They are convenient for home use and first attempts, but they have two peculiarities. First, the buttons in the kit are matched to the tips, and buttons from another manufacturer may not fit exactly. Second, the finish and steel of these buttons are often intended for light loads. If you produce clothing for sale, choose the buttons according to the item and then provide the tool that matches them – not the other way round.

Maintenance and safety

Clean lint and finish residue from the dies, check the punch for wear and adjust the press stroke when changing fabric. Work with a guard on pneumatic machines and never put your fingers under the punch. A worn die leaves marks on the cap and under-sets the socket – replace it in time.

When it is better to outsource the setting

If you set buttons rarely or in many different styles, the investment in a press and a set of dies may not pay off. In that case it is more sensible to outsource the setting to a company that has the equipment and dies for the buttons in question. Browse the styles in the snap buttons category.

Polkom: snap buttons and setting

Polkom is a Bulgarian manufacturer of snap buttons, eyelets and metal accessories. All our metal finishes are nickel free. We offer a service for setting buttons on your items and advice on the right tools and dies. Write to us via the contact page with the button style, the quantity and the type of fabric.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Do pliers work for all snap buttons?
No. Pliers have tips for certain styles and sizes, most often for open-prong snaps and small ring snaps. Large metal buttons for denim and jackets require more force and an exact die, so a press is more suitable for them. Before buying, check that the tips match the style and diameter of your buttons.
Which die do I need for snap buttons?
The die is chosen by the button style, the cap diameter and separately for the upper and lower pairs of parts. Ring snaps, post snaps and open-prong snaps have different dies. The safest way is to ask the manufacturer of the buttons which die matches them. An unsuitable die scratches the finish and does not set properly.
Should I choose a hand press or a foot press for a workroom?
For a workroom with small and medium runs, a hand bench press is usually enough – it is cheaper, compact and gives an even result. A foot press frees the hands for positioning and is faster, so it pays off with larger and regular quantities. The decision depends on the number of buttons per month and their size.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.