Contents
To order wholesale snap buttons, prepare a specification with the model, cap size, post length or fabric thickness, finish, colour, logo and quantities per size. The manufacturer makes a sample that you test on the actual product with your press and dies, and once approved it becomes the reference for the production run. The price is determined by the model, material, finish, logo and quantity, so it is given individually after an inquiry.
Why order from a manufacturer
With snap buttons, details matter: the spring force, the post, the finish and compatibility with the dies. When you work directly with a manufacturer, you can adjust these parameters to the product, get a snap with your logo and ensure consistent quality in repeat orders. The manufacturer can also advise you on which model suits a particular fabric and which dies you will need.
Wholesale snap buttons: what the inquiry should contain
| Parameter | Example |
|---|---|
| Model | prong, standard, domed, flat; ring, post, prong |
| Cap size | 10 mm, 12.5 mm, 15 mm |
| Post or fabric thickness | two-layer denim, jersey, leather |
| Material | brass, steel, plastic |
| Finish | nickel colour, black oxide, antique brass, gold, bronze, coloured lacquer |
| Surface | matte, gloss, satin, patina |
| Logo | embossed, engraved, enamel; position on the cap |
| Quantity | per size and finish |
| Product | jacket, baby bodysuit, bag, workwear |
| Requirements | nickel free, wash resistance, salt water resistance |
The more complete the information, the more accurate the quote. If you are repeating an existing model, send a physical sample or photos from the top, side and bottom with a ruler next to the snap.
Logo on the cap
Embossing
The logo is made in a die and stamped onto the cap – raised or recessed. This is the classic solution for denim, jackets and workwear. It requires tooling, so it is best suited to production runs and repeat orders.
Laser engraving
The beam removes the finish and leaves a contrasting mark. It needs no tooling and allows more flexible changes. It is suitable for flat caps and smaller runs.
Enamel and colour
The logo or the background can be filled with coloured enamel or lacquer – this way the snap carries the brand’s corporate colours.
Preparing the file
- vector format (AI, EPS, SVG, PDF);
- a simplified mark, legible at the actual size of the cap;
- a minimum line thickness sufficient for embossing;
- the position and orientation relative to the garment.
Sample and approval
- Proposal – a visualisation of the snap with the logo and the chosen finish.
- Sample – sample snaps are produced.
- Test – you set them with your press and dies on the actual fabric, wash them, check the fastening force and the finish.
- Approval – the approved sample is kept as the reference.
- Production run – production and delivery; lead times are confirmed in the quote.
Dies and compatibility
Before ordering, check whether you have dies for the chosen model and size. Snaps from different manufacturers often require different dies, even with the same diameter. If you are switching to a new supplier, ask for information about the dies together with the sample. If you do not have the equipment, you can outsource the setting – Polkom offers this service.
What affects the price
- the model and size of the snap;
- the material – brass, steel or plastic;
- the finish and surface treatment;
- the type of logo and whether new tooling is needed;
- the quantity and the split by sizes and colours;
- special requirements, such as wash resistance (all our finishes are nickel free).
Prices are given individually. Send an inquiry with the complete specification to receive a quote.
Planning the collection
Snap buttons are usually the last accessory anyone thinks about, but they are often on the critical path. If the snap has a new logo or a special finish, the sample and production take time, and sewing cannot start without an approved snap. So include the snaps in the style specification at the prototype stage. Combine the orders for all styles of the season that use the same snap – this makes it easier to plan the split by sizes and colours and gives better consistency of finish between styles. Also allow a reserve for rejects during setting and for after-sales repairs.
Inspection on delivery
On receipt, check random snaps from different packs: conformity with the reference in colour and finish, legibility of the logo, size, post and fastening force after setting. Set a few snaps on a sample and wash it. Keep the inspection record – it is useful for the next order.
Common mistakes in wholesale orders
- approval based on a visualisation only, without a physical test with the actual press;
- missing information about the fabric thickness;
- a logo that is too detailed for a small cap;
- different finishes on the snaps, zip and rivets in one product;
- no reserve for rejects during setting.
Coordinate the snaps with the metal buttons and see branding examples in the engraved buttons category. You will find the standard models in the snap buttons category.
Polkom – snap button manufacturer
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags, based in Sofia, with over 30 years of experience and more than 10,000 articles. We manufacture snap buttons from 6 to 40 mm with a logo, finish and colour of your choice, make samples quickly and deliver across the EU. Send your specification via the contact page – minimum quantities depend on the item.
Share this article














