Fabric Wristband Closures – Types and How They Lock

Polkom · 4 min read

Fabric wristbands for events are fastened with three main types of closure: a single-use plastic closure that tightens and cannot be opened without cutting; a metal crimp closure that is closed with pliers; and an adjustable closure for repeated wear. For access control at events, single-use and metal closures are chosen, while adjustable ones suit souvenir wristbands.

The closure is a small part, but it decides whether the wristband works as a real pass that stays with its owner. Here is how each type works and how to choose the right one for your event.

How fabric wristband closures work

Both ends of the band go into the closure. When it is tightened, internal teeth or a serrated wedge grip the fabric and keep it from sliding back. The denser the band and the tighter the closure fits, the harder it is to remove the wristband without damaging it.

Types of closures

Single-use plastic closure

This is the most widely used option at festivals and concerts. The band is threaded through the closure, the wristband is tightened around the wrist and the free end is cut off. Once tightened, the closure cannot be loosened. Any attempt to open it visibly breaks it, which makes tampering easy to spot at the entrance.

  • quick to fit, no tools needed;
  • light and comfortable for multi-day wear;
  • available in various colours – it can be matched to the colour of the access zone.

Metal crimp closure

The metal closure is fastened with pliers that press both sides of the metal sleeve around the band. The connection is particularly strong and does not loosen with movement, sweat or water. It is used at multi-day events, for VIP passes and at sports competitions, where the wristband has to last many days.

  • the highest security against removal and transfer;
  • requires pliers and a little more time at the entrance;
  • Polkom metal parts are nickel free.

Adjustable closure for repeated wear

Adjustable closures allow the wristband to be loosened and tightened many times. They are not intended for access control but for souvenirs, fan wristbands, corporate gifts and campaigns where the wristband is worn as an accessory after the event too.

Comparison of closures

ClosureSecurityFittingSuitable for
Single-use plastichighby hand, in secondsfestivals, concerts, one-day and multi-day events
Metal crimpvery highwith pliersVIP areas, multi-day festivals, competitions
Adjustablelow (removable)by handsouvenirs, clubs, promotions

Fabric wristbands and event security

For access control, the wristband has to meet three requirements: it cannot be removed without damage, it is hard to copy and it is quickly recognised at the entrance. Besides the closure, the following measures help:

  1. Colour by zone – different colours for visitors, staff, participants and VIP guests.
  2. Date-specific design – the event name, date or day woven or printed along the band.
  3. Woven design – woven wristbands are harder to copy than printed ones, because the logo is part of the band itself.
  4. Correct tightening – the wristband should be tight enough not to slip over the hand, yet comfortable. Train the entrance team.
  5. Numbering or a code – if extra checks are needed, the wristband can carry a serial number or a code.

Band and print

The closure has to match the band. A dense woven band is gripped securely by the teeth, while a smooth satin band needs a closure with a suitable grip. That is why the band and the closure are chosen together.

  • Woven band – the logo is woven in; it is durable and does not fade. Suitable for multi-day and premium events.
  • Printed satin band – the design is printed and reproduces many colours and gradients. Soft and pleasant on the skin.

If you only need branded ribbon for other purposes – for packaging, medals or hangers – see our printed ribbon with logo and all ribbons.

Sizes

Typical fabric wristbands on the market are about 15 mm wide and about 35 cm long before tightening, which allows them to fit any wrist, including over a sleeve. For children's events and narrow wrists, a shorter band is used. State in your inquiry who the wristbands are for, so the length can be chosen. A wider band gives more space for logos and sponsors but is more noticeable on the wrist – for conferences and business events a narrower, discreet version is often preferred.

How to order fabric wristbands with a logo

  1. Send the logo, the text and the colours of the event.
  2. Choose the type of band – woven or printed satin.
  3. Choose the closure according to the purpose – access control or souvenir.
  4. State the quantities by zone and colour.
  5. Approve the proof and the sample, after which the run is produced.

Plan the order with plenty of time before the event – the sample and the run take time, and last-minute changes are difficult. Minimum quantities depend on the item.

How to remove the wristband after the event

Single-use and metal wristbands are cut with scissors between the closure and the wrist. Advise visitors not to pull the wristband over the hand – it hurts the skin. An adjustable wristband is loosened and removed without tools.

Fabric wristbands from Polkom

Polkom is a manufacturer of textile accessories and ribbons with over 30 years of experience. We make fabric wristbands with logo – woven and satin, with a single-use, metal or adjustable closure – with delivery across the EU. An OEKO-TEX® certificate is available for all products. Send an inquiry with the date of the event and the number of wristbands.

Share this article

FAQ

Frequently asked questions

Can a fabric wristband with a single-use closure be taken off and put back on?
No. That is exactly the purpose of a single-use closure – once tightened, it cannot be loosened. If someone tries to open it, the closure is visibly damaged and security can spot it at the entrance. If you want a wristband that can be removed, choose an adjustable closure – it suits souvenirs, though not access control.
Can you shower wearing a fabric wristband?
Yes. Woven and satin wristbands withstand water, sweat and showers during multi-day events. The metal crimp closure also stays secure when wet. Once dry, the band regains its appearance. For extended wear, the wristband should be tightened comfortably so it does not rub the skin.
What is the difference between a fabric and a silicone wristband?
A fabric wristband is a band of fabric with a closure that is tightened around the wrist, while a silicone wristband is a closed elastic ring. The fabric wristband allows a far more detailed design, woven or printed, and with a single-use closure it works as a pass. A silicone wristband can be taken off and handed on, so it is more of a promotional souvenir.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.