Logo Ribbon for Packaging – How Many Metres to Order and How to Calculate

Polkom · 5 min read

To calculate how many metres of logo ribbon you need, measure the length for one package – the circumference of the box plus the bow, or the length of one label piece – multiply by the number of packages and add a reserve of 5 to 10 % for cutting, trial ties and waste. This way you order printed ribbon without a large surplus and without the risk of running out at the height of the season.

Why the length of logo ribbon matters

Logo ribbon is made specifically for your brand: the base colour, the print colour and the design are prepared to order. If it later turns out that the ribbon is not enough, an additional small order means new preparation and another wait. An accurate calculation at the start saves both money and time, and the reserve covers cutting errors and the training of the team tying the bows.

Step 1: decide how you will use the ribbon

The length depends entirely on how the ribbon is used. The most common options are:

  • a bow on a gift box – the ribbon wraps the box crosswise and ends in a bow;
  • wrapping in one direction – the ribbon goes once around the box and is glued or sewn, without a bow;
  • ribbon for closing pouches, tissue paper and envelopes;
  • a loop for branded hangers;
  • label tape – the ribbon is cut into equal pieces and sewn into the garment or onto the packaging.

Formula for a box bow

With crosswise wrapping the ribbon runs once along the length and once along the width of the box, covering the height both times:

Length for one box = 2 × (length + height) + 2 × (width + height) + ribbon for the bow

The length for the bow depends on the size of the loops and tails. The easiest way is to measure it once: tie a trial ribbon exactly as it will be done at the packing table, untie it and measure. For wrapping in one direction the formula is 2 × (length + height) plus a few centimetres of overlap.

Box (L × W × H, cm)MethodCalculationPer box
10 × 10 × 5cross + 40 cm bow2 × 15 + 2 × 15 + 401.00 m
30 × 20 × 10cross + 50 cm bow2 × 40 + 2 × 30 + 501.90 m
33 × 20 × 12cross + 50 cm bow2 × 45 + 2 × 32 + 502.04 m
30 × 20 × 10one direction + 5 cm overlap2 × 40 + 50.85 m

Example: 500 boxes of 30 × 20 × 10 cm with a cross and a bow require 500 × 1.90 = 950 m. With a 7 % reserve this comes to about 1,015 m of logo ribbon.

Formula for label tape and hanger loops

When the ribbon is cut into pieces, the calculation starts from one piece:

Piece length = visible length × number of folds + 2 × seam allowance

Example: a label with a visible length of 5 cm, folded in two, with a 0.5 cm allowance on each side – 5 × 2 + 2 × 0.5 = 11 cm. 100 metres of ribbon give about 900 labels. For hanger loops, measure the finished loop together with the part that goes into the seam or under the clip.

Logo repeat – how often the logo should repeat

The repeat is the distance from the start of one logo to the start of the next. It determines whether the brand will be visible in the right place:

  • on a bow the repeat must be short enough for a logo to land both on the top of the box and on the tails;
  • for wrapping in one direction at least one logo must sit in the centre of the top, so the repeat is shorter than half its width;
  • on label tape the repeat equals the piece length, with a cutting mark between the logos – so every label is centred.

State in the inquiry what the ribbon is for, and the designer will suggest a suitable repeat.

Logo ribbon width by packaging

WidthSuitable for
6–10 mmjewellery boxes, pouches, string tags, thin bows
15–16 mmcosmetics, perfume boxes, small gifts
25 mmmedium boxes, paper bags, hangers
38–40 mmlarge gift boxes, shoe and clothing boxes
50 mm and moreluxury boxes, baskets, shop windows

A wider ribbon gives more room for the logo but also uses more material in the bow. Satin and grosgrain ribbon for printing is available in widths from 3 to 70 mm.

Ribbon type and colour

Satin ribbon is smooth and glossy and gives a high-contrast print – the classic for gift packaging. Grosgrain ribbon is matt and ribbed, with a more discreet and elegant effect. Cotton ribbon suits eco packaging. The base and print colours are set to Pantone so that they match the box and the other brand elements. If you use the same ribbon for different products, choose a neutral base colour that looks good on all your packaging.

Common calculation mistakes

  • only the circumference of the box is measured, and the bow and tails are forgotten;
  • the lid is not taken into account – for a box with a lid, measure the height with the lid on;
  • seasonal campaigns are planned with the exact number of packages, without a reserve for extra sales;
  • one common ribbon is ordered for several box sizes without checking that its width suits all of them.

If you use boxes in different sizes, calculate the length for each size separately and add up the results.

What the inquiry should contain

  1. ribbon type and width;
  2. base colour and print colour to Pantone;
  3. the logo as a vector file;
  4. how it will be used and the repeat you want;
  5. the calculated total length including the reserve;
  6. when you need the ribbon – especially before holiday campaigns.

Logo ribbon from Polkom

Polkom is a manufacturer of fashion accessories, packaging and boxes with over 30 years of experience. We make printed logo ribbon to your design and can combine it with boxes, tissue paper and bags from the packaging category, so that all elements of your packaging share one style. All products come with an OEKO-TEX® certificate. Minimum quantities depend on the article. Send your box sizes and logo via the contact page – we will help with the calculation and prepare a sample.

Share this article

FAQ

Frequently asked questions

What is the smallest order for logo ribbon?
The minimum quantity depends on the ribbon type, the width and the printing technique, so no single figure can be given. Send an inquiry with the ribbon type, width, number of colours in the logo and the length you need. The quote will give you the exact minimum, the price and the options for smaller runs.
Can the logo be printed on both sides of the ribbon?
Double-faced satin ribbon is smooth on both sides and allows printing on the front and the back, which is useful for bows where the tails turn over. Whether this is possible for a specific design and technique is checked at the sample stage. State the requirement in the inquiry so that it is included in the quote.
What file should I send for printing the logo on ribbon?
A vector file works best – AI, EPS, PDF or SVG – with the text converted to outlines. State the Pantone colours and the desired logo height relative to the ribbon width. Very thin lines and small text are checked in advance, because they can merge on a narrow ribbon. Raster files are accepted for reference only.
How should I store logo ribbon until use?
Keep the rolls in a dry, closed room, away from direct sunlight and heat sources, so the print does not fade and the ribbon does not deform. Do not hold the rolls together with rubber bands and do not stack them on top of each other without packaging. The cut ends of synthetic ribbon can be lightly heat-sealed so they do not fray.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.