Metal Buttons and Clasps for Traditional Costumes

Polkom · 4 min read
Metal Buttons and Clasps for Traditional Costumes

In Bulgarian traditional costumes, metal garment buttons are most often spherical ball buttons with a shank, sewn in rows on vests, jackets and dresses, while clasps – two-part metal fasteners with rich decoration – are worn on belts. Today’s ensemble costumes use replicas made from brass or zinc alloy with antique silver or old gold finishes, which are lighter, stronger and easier to maintain than the original historic pieces.

Metal Elements in Bulgarian Traditional Costumes

Costumes vary greatly by region, but metal is present almost everywhere – as fasteners, decoration, and a symbol of festivity and prosperity.

  • Ball buttons. Small hollow or solid spheres with a shank, often engraved or filigreed. Sewn in one or several rows, many serve purely decorative purposes.
  • Clasps. Two large metal parts that hook together to hold the belt. Shapes and ornaments vary regionally – from almond-shaped to round, with relief, engraving or inlays.
  • Hooks and eyes. Hidden metal fasteners on jackets and vests that keep the garment closed under the decoration.
  • Coins and pendants. Strands and jewelry on the chest, forehead and hair, which also require strong rings and fasteners.
  • Cords and braids. Not metal, but work in combination with buttons – forming loops for fastening and decorating edges.

Metal Buttons for Stage Costumes: Requirements

A dance ensemble costume is a working garment. It is worn dozens of times per season, endures intense movement, sweat, travel and frequent washing. Therefore, practical criteria apply when choosing metal buttons and fasteners:

CriterionWhy It MattersRecommendation
WeightDozens of buttons add load to the fabric and dancerHollow ball buttons or stamped brass
Shank StrengthButtons catch during jumps and spinsShank cast integrally or securely soldered
FinishStage lighting highlights tone differencesUniform tone for the entire ensemble, with protective lacquer
Sweat ResistanceTarnishing and stains on fabricHigh-quality electroplated finish, nickel free alloy
ReordersNew members and lost button replacementPreserved model and approved sample

Alloy and Finish Selection

Brass

Brass is stamped from sheet metal and suitable for hollow ball buttons and lighter clasps. It has a warm natural colour and good corrosion resistance. It allows fine relief but not very deep.

Zinc Alloy

Zinc alloy is cast in moulds, so it reproduces complex shapes and deep ornaments – convenient for clasp replicas and solid buttons. It is heavier, so brass is preferred for buttons used in large quantities.

Finishes

Traditional costumes often feature silver or silver-plated elements, so the most popular finishes for replicas are antique silver, oxidised silver and old gold. Darkened recesses highlight the ornament and give an “authentic” look without manual aging. All Polkom metal buttons are nickel free – important for direct skin contact during long performances.

Clasps and Decorative Fasteners Made to Order

Clasps are the most recognisable metal element of the women’s costume, and ensembles often require series of identical pairs. Custom production involves several steps: photo or original sample, ornament adaptation, mould making, sample and series production. If your ensemble also uses metal buckles for belts or sashes, suitable models are available in metal buckles. For non-standard clasps and fasteners, send a sample and we will discuss possible technology.

Cords and Lace for Costume Decoration

Metal buttons rarely stand alone. In men’s costumes, braids and cords form spirals, loops and edgings around buttons, while in women’s costumes, lace on sleeves, shirts and aprons completes the decoration. Choose cords with thickness matching the button size – the loop should fit the ball button snugly but allow easy fastening. Suitable models are available in cords and lace.

Practical Checklist for Ensemble Leaders

  1. Count buttons by type and size for each costume – men’s and women’s separately.
  2. Add reserve for lost buttons and new members.
  3. Decide on one metal tone for the entire ensemble and record it.
  4. Send an original button or photo with size in millimetres.
  5. Approve the sample under stage lighting, not just daylight.
  6. Keep the approved sample for future orders.

Children’s Costumes and School Groups

Requirements are stricter for children’s costumes. Buttons must be smaller and lighter, without sharp edges, and with a shank that does not detach when pulled. For the youngest dancers, it is wise to sew decorative ball buttons firmly with double thread, while functional fastening is done by hidden hooks or snap fasteners under the decoration. This preserves the traditional look while allowing quick and safe dressing backstage.

Care for Metal Elements

After performances, hang the costume to dry before storing in a cover. Do not use abrasive cleaners on buttons – they remove protective lacquer and patina. When hand washing, wrap clasps and hanging elements or remove them if attached by rings.

See more models and finishes in the metal buttons category.

Polkom – Manufacturer of Metal Accessories for Traditional Costumes

Polkom is a manufacturer of accessories for fashion, footwear and bags, perfumes and cosmetics, packaging and furniture accessories, headquartered in Sofia with over 30 years of experience. We produce metal buttons, fasteners, cords and lace for ensemble and stage costumes. All products are OEKO-TEX® certified, and metal parts are nickel free. Send a sample or photo via the contact form for a sample and quote.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can you produce a replica of an antique traditional costume button?
Yes. We need the original or clear photos from several angles with size in millimetres. The ornament is adapted for production, alloy and finish are chosen, a mould is made, and a sample is produced for approval. The more complex the relief, the more suitable zinc alloy is; for light hollow ball buttons, stamped brass is preferred.
What finish is best for buttons on stage costumes?
The most popular are antique silver, oxidised silver and old gold, because darkened recesses highlight the ornament and give an authentic look. The finish must have a protective lacquer to withstand sweat and frequent use. It is important that the entire ensemble has one tone, so the sample is approved under stage lighting.
How many spare buttons should we order for an ensemble?
It depends on the number of costumes and frequency of performances, but it is wise to provide a reserve for lost buttons and new ensemble members. Even more important is to keep the model and approved sample so that future orders match in shape, size and tone with existing costumes.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.