Contents
Metal shoe accessories are the parts with which a shoe is laced, fastened and branded: buckles for straps, eyelets and hooks for laces, aglets, zips, decorative rivets and logo plates. They are chosen according to the model – sandal, loafer, ankle boot or trainer – and according to the leather or textile of the upper. Three things matter: strength, a finish that does not wear off, and a consistent look across all the metal parts.
Shoe accessories by function
It is useful to look at the metal parts by the job they do in the shoe:
| Function | Accessories | Typical models |
|---|---|---|
| Fastening with a strap | buckles, clips, keepers | sandals, strap shoes, boots |
| Lacing | eyelets, boot hooks, bridged speed hooks, aglets | ankle boots, combat boots, trainers, hiking shoes |
| Fastening with a zip | zips, sliders, zip pullers | boots, ankle boots, winter shoes |
| Decoration | decorative rivets, chains, ornaments | loafers, ballet flats, fashion boots |
| Branding | metal logo plates and emblems | all models |
Shoe buckles
Shoe buckles are smaller and finer than belt buckles. On sandals and strap shoes they must be light, must not press on the ankle and need a smooth edge that does not chafe the skin. Boots use more substantial buckles and clips, which are mainly decorative. The width of the inner opening is chosen to match the strap width exactly. You will find useful guidance on choosing buckles in the metal buckles category.
Eyelets and lace hooks
Shoe eyelets
Eyelets protect the lace holes from tearing and give a finished look. Shoes use round and oval eyelets, with or without washers, and sports models also use eyelets hidden under the top layer. The size is chosen according to the thickness of the laces. You will find more about types and sizes in the eyelets category.
Boot hooks
Hooks let the lace be hooked on quickly without threading it through a hole. They are fitted in the upper part of ankle boots, combat boots and hiking shoes. A bridged speed hook has an extra bridge that reinforces the construction and guides the lace smoothly.
Shoelace aglets
Metal aglets replace plastic ones and turn the laces into a design detail. They can be smooth, engraved or carry a logo.
Decorative metal details
Decorations set a collection apart: metal bits on loafers, chains, rivets along the edge of boots, ornaments and plates on the toe or heel. With these the look comes first, but they also have to withstand bending and knocks. It is important that the fastening – with screws, rivets or pins through the leather – is matched to the thickness of the material.
Metal logo plates
A small metal plate on the tongue, heel or side is one of the most recognisable ways to brand a shoe. The logo can be raised, debossed, engraved or enamelled, and the plate can have pins, slots for a strap or holes for sewing on.
Which shoe accessories for which model
- sandals and slides – small buckles, keepers and decorative elements on the straps;
- loafers and ballet flats – metal bits, ornaments and small logo plates;
- ankle boots and combat boots – eyelets in the lower part, hooks in the upper part, metal aglets;
- boots – zips, decorative buckles and clips along the shaft;
- trainers – eyelets, lace aglets and small metal emblems;
- work and hiking shoes – sturdy bridged speed hooks and eyelets in durable metal.
When a collection includes several models, choose the parts so that the finish and style repeat across all of them.
Materials of metal shoe accessories
- iron – strong and economical, used for hooks and eyelets, but needs a good anti-corrosion finish;
- brass – does not rust, is easy to form and takes any finish, suitable for eyelets and hooks;
- zinc alloy – allows complex relief shapes, which is why it is preferred for buckles, decorations and logo plates;
- stainless steel – for products exposed to moisture and salt.
Finishes and nickel free
Shoes are worn with moisture, sweat and friction, so the finish must be durable. The most popular are gold, antique brass, silver, gunmetal, black and matt coloured finishes. All Polkom metal finishes are nickel free, and the nickel-look tone is only a colour effect – nickel-look, nickel free. This matters for sandals and shoes worn barefoot. If the collection also includes bags, belts or small leather goods, choose the same finish for all the metal parts so that the set looks consistent.
Custom shoe accessories with logo
Besides standard models, metal accessories can be made to the brand's design: a buckle with a logo, a hook in a special colour, an aglet with an engraved inscription or a plate in a non-standard shape. The process starts with a technical drawing or photo, continues with a sample for approval and ends with series production.
How to choose metal shoe accessories
- Start from the model and how the shoe fastens.
- Measure the width of the straps and the thickness of the laces.
- Determine the thickness of the leather or textile in which the parts will be fitted.
- Choose one finish for all the metal parts.
- Test a sample on the real material and on your machine.
The same types of accessories suit small leather goods – bags, wallets and belts – while threads and materials for sewing leather are gathered in the shoes and leather category.
Shoe accessories from the manufacturer Polkom
Polkom is a manufacturer of accessories for fashion, shoes and bags with over 30 years of experience. In the shoe accessories category you will find boot hooks, bridged speed hooks, eyelets and buckle clips, and on request we make parts with the brand's logo. All products are OEKO-TEX® certified. Minimum quantities depend on the article. Send a photo of the model, the dimensions and the desired finish via the contact page.
Share this article












