Straight or Round Eye – Types of Hook and Eye Closures

Polkom · 4 min read
Straight or Round Eye – Types of Hook and Eye Closures

Hooks and eyes are combined in two main ways. The straight eye is used when one edge of the garment overlaps the other – for example on a skirt waistband. The round eye is used when the two edges must meet exactly in one line – at a neckline, the back of a dress or the top of an invisible zip. The hook is almost the same in both cases; it is the eye that decides.

Anatomy of the hook and eye closure

Each set consists of two parts bent from metal wire:

  • hook – a curved part with two loops at the base through which it is sewn on; it is placed on the inside of the upper edge;
  • eye – the part the hook catches on; it also has loops for sewing, but its shape determines how the edges lie.

Some hooks have a slight wave or “hump” in the neck. It creates springiness and makes accidental unhooking harder, so such models are preferred in places with movement.

Straight eye (bar type)

The straight eye resembles a small horizontal bracket. It is sewn flat onto the lower, underlapping edge, at some distance from the edge. The hook catches on it, and the upper edge lies on top and hides the whole closure.

When it is used

  • waistbands of skirts and women’s trousers in light materials;
  • overlapping cuffs and plackets;
  • any place where the edges overlap by a few millimetres to a centimetre.

The straight eye takes tension better than the round one, because the hook lies flat on it and the force is distributed over a larger area of fabric.

Round eye (loop type)

The round eye is bent into an arc and sewn on so that it protrudes slightly beyond the edge of the fabric. When the hook catches in it, the two edges come together tightly side by side without overlapping.

When it is used

  • the top of the invisible zip on dresses and skirts;
  • neck openings and necklines that fasten edge to edge;
  • the back of evening and bridal dresses without a zip;
  • collars and stand-up collars of blouses.

Since a small part of the round eye is visible from the outside, its colour should match the fabric. On dark fabrics, a black eye remains almost unnoticeable.

Comparison: which type of eye to choose

CriterionStraight eyeRound eyeThread eye
Position of the edgesOverlapEdge to edgeEdge to edge
Visibility from outsideHiddenSlightly visibleAlmost invisible
LoadHighMediumLow
Typical positionSkirt waistbandAbove an invisible zip, necklineFine evening dresses
Suitable for series productionYesYesMore for ateliers

Thread eye

A thread eye is made directly on the fabric – a few loose stitches the length of the future loop, worked over densely with buttonhole stitch. The result is a flexible loop in the colour of the fabric, which is the most discreet solution on silk and chiffon. Its drawbacks are lower strength and the time it takes to make, so it is rarely used in series sewing. Work with a strong polyester sewing thread so that it does not wear through quickly.

Hook and eye tape

In lingerie and corsetry, ready-made tapes are used instead of single sets – a textile base with built-in hooks on one side and several rows of eyes on the other. The rows of eyes allow fastening in different positions, for example on bras. The tapes are sewn on by machine and speed up series production. This is a separate product with its own standard configurations, chosen according to the number of hooks in a row.

Placement and spacing between sets

When several sets are placed along one opening, for example down the back of a dress without a zip, the spacing between them determines whether the edge lies smoothly. On fine fabrics the sets are placed closer together, because the material easily gapes between them. On heavier fabrics the spacing can be larger. The first set is placed close to the top edge, and the following ones are distributed evenly downwards.

With a straight eye, all the eyes must be in one line parallel to the edge, otherwise the overlap will be crooked. With a round eye, it is important that all the loops protrude equally beyond the edge. That is why series sewing uses a template – a cardboard or plastic strip with the positions marked, which is placed on each piece.

Reinforcing the area

Whatever the type of eye, the place where it is sewn on must be reinforced with interfacing or a double layer of fabric. This way the loops do not cut through the material with repeated fastening, and the closure keeps its position throughout the life of the garment.

How the garment construction decides the choice

Before choosing a hook and eye, answer three questions:

  1. Do the edges overlap? If yes – a straight eye. If they meet edge to edge – a round one.
  2. How great is the tension? With heavy load, choose a larger hook or switch to a trouser hook and bar.
  3. How important is invisibility? For luxury styles, consider a black or covered eye, or a thread eye.

Common mistakes

  • A round eye on an overlapping waistband – the edges do not line up and the waistband sits crooked.
  • A straight eye at an edge-to-edge neckline – a fold forms and the opening gapes.
  • An eye sewn only through the loops without stitching at the sides – it tilts under tension.
  • A hook and eye from different sets – they do not match in wire thickness.

Browse the available models and colours in the wire hooks and eyes category.

Sets from Polkom

Polkom is a Sofia-based manufacturer of accessories for fashion, furniture, footwear and bags, with over 30 years of experience. We supply wire hooks with matching eyes in silver, gold and black, as well as invisible zips and threads for the same garment. Send a sketch or sample of the style via the inquiry form and we will help you choose the type of eye and the size.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can the hook be used with both a straight and a round eye?
Yes, in most sets the hook is the same and only the eyes differ. It is important that the eye is the same size as the hook so that it matches in wire thickness. Some sets contain both types of eyes, so the sewer chooses according to the construction of the specific place in the garment.
What are wire hooks and eyes?
Wire hooks and eyes are a small closure set made of bent metal wire, sewn on the inside of the garment. They are used on dresses, blouses, skirts and lingerie where a discreet closure is needed. They are not jeans buttons, but fine hooks for light materials.
Which eye is stronger – straight or round?
The straight eye usually withstands a greater load, because the hook lies flat on it and the force is distributed over a larger area of fabric. That is why it is preferred for waistbands. The round eye is slightly weaker, but it is indispensable where the edges must meet exactly, without overlapping.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.