Manufacturer · Fashion Accessories
Cord stoppers with logo are made using relief in the mould, laser engraving, pad printing or a metal plate built into the body. On metal cord stoppers the logo is most often in relief or engraved, while on plastic ones it is in relief or printed. A colour to a sample or a finish matching the collection's other accessories is usually added to the logo.
Why brands put a logo on the cord stopper
A cord stopper is one of the few accessories the user touches every time they use the hood, waistband or backpack. A visible cord stopper with logo works as a discreet brand mark, much like engraved buttons and cord ends. For sports and outdoor brands it is part of the recognisable look, and in fashion it is a detail that sets the product apart from the mass market.
Methods for applying a logo to cord stoppers
Relief in the mould
The logo is made as part of the mould in which the body is cast. The result is a raised or recessed logo that does not wear off. The method suits metal and plastic cord stoppers and is the most durable, but it requires a new mould to be made. It is therefore justified for larger runs or long-running collections.
Laser engraving
On plated metal cord stoppers, the laser removes the top layer and reveals the lighter metal underneath or creates a matt contrasting area. The method suits smaller runs, because it requires no new mould, and allows fine lines and small text.
Pad printing
The logo is printed with ink onto the body. Several colours and an exact match to the brand colour are possible. The durability of the print against friction and washing must be checked with a sample.
Built-in plate or cap
On some models the body has a recess for a small metal plate with a logo, or a cap that covers the end. This gives a plastic cord stopper a metal accent. For such details, see also the metal logo plates section.
Comparison of methods
| Method | Material | Durability | Suitable for |
|---|---|---|---|
| Relief in the mould | Metal, plastic | Highest | Large and recurring runs |
| Laser engraving | Plated metal | High | Small and medium runs, fine details |
| Pad printing | Plastic, metal | Medium, depends on the ink | Coloured logos |
| Built-in plate | Plastic + metal | High | A premium accent |
The surface is small – the design must be simplified
The visible surface of a cord stopper is a few millimetres. Complex logos with thin lines and small letters lose their legibility. We recommend:
- a symbol or monogram instead of the full name with a tagline;
- a line thickness that remains legible after casting or engraving;
- no gradients or thin outlines for relief;
- a vector file (AI, EPS, PDF or SVG) with text converted to outlines;
- the desired logo height and its position on the body.
Colour and finish
Plastic cord stoppers can be coloured to a sample or to Pantone so they match the fabric, the cord or the brand colours. Metal ones receive a finish – nickel, black nickel, gunmetal, gold, antique, matt or gloss. The best result is achieved when the cord stoppers, cord ends, eyelets and buttons are in one finish and from one batch, so there is no difference in tone.
Coordinating with the brand identity
A cord stopper with logo is part of the brand's accessories system, not a separate element. Before choosing a method, review how the logo is executed on the buttons, eyelets, labels and zips. If the buttons have an engraved monogram, it makes sense for the cord stopper to carry the same mark in the same finish. If the brand uses a bright corporate colour, a plastic cord stopper in that colour with a relief mark may be more striking than a metal one. Record the decisions in a brand accessories guide so they are repeated consistently in future seasons and with different manufacturers.
How ordering cord stoppers with logo works
- Inquiry – you send the product, the cord, the desired material, the logo and the approximate quantity.
- Proposal – we select a suitable model and marking method.
- Drawing and approval – you receive a visualisation of the logo on the cord stopper.
- Sample – a sample is made, which you test with your cord and product.
- Series production – after the sample is approved.
What the price depends on
The price of cord stoppers with logo depends on the model and material, the marking method, whether a new mould is needed, the finish or colour to a sample, and the quantity. With relief in the mould there is a one-off tooling cost that is spread over the series, while with laser engraving there is usually no such cost. For an exact quote, send an inquiry with the details – minimum quantities also depend on the article.
Common mistakes
- A logo designed for a label, not simplified for the small surface.
- Approving the logo without a sample on the actual cord.
- Different finishes on cord stoppers and cord ends from different suppliers.
- Pad printing in a place that constantly rubs against the zip or the fabric.
- A logo on the side of the cord stopper that faces the garment once fitted and cannot be seen.
- Ordering a new logo just before the season starts, with no time for sampling and corrections.
You will find the base models for branding in the cord stoppers category.
Cord stoppers with logo from Polkom
Polkom is a Bulgarian manufacturer of garment accessories with more than three decades of experience and its own production to the client's design and logo. We offer fast sampling and delivery across the EU. Send us your logo and a description of the product via our inquiry form.
