Contents
Bobbin thread for machine embroidery is a finer thread wound on the bobbin that locks the stitches on the back of the fabric. It is most often polyester or polyamide, around No. 60–90 (finer than the No. 40 top thread), in white or black. It reduces the thickness of the embroidery, allows more stitches per bobbin and helps the top thread cover the front cleanly.
What bobbin thread for machine embroidery is
Every embroidery machine works with two threads: the top thread, which is visible at the front and gives the colour, and the bobbin thread, which comes from the bobbin in the hook. With each stitch the two threads interlock inside the fabric. When correctly set, the interlock point is slightly towards the back, so only the top thread is visible at the front. The bobbin thread's job is to hold the stitch, not to be seen.
Since it is not visible at the front, the bobbin thread does not have to be the same material and colour as the top thread. A special, finer thread made precisely for this role is used.
Types of bobbin thread
Polyester bobbin thread
The most common type. Strong, of even thickness and with little stretch. Suitable for most fabrics and products, including those washed often.
Polyamide (nylon) bobbin thread
Softer and slightly more elastic. Some workshops prefer it for jersey and sports fabrics, where the embroidery needs to be flexible.
Cotton bobbin thread
Rarely used – mainly when the whole product must be made of natural fibres. It has more lint and soils the hook faster.
Self-wound or prewound bobbins
Bobbin thread is bought on cones for self-winding or as prewound bobbins. Prewound bobbins hold more thread because they are wound more tightly and evenly, and they save time in the workshop. Winding by hand is cheaper and lets you use the same cone for many bobbins. The choice depends on the volume of work and the type of machines.
Bobbin thread for machine embroidery: weight and colour
| Parameter | Recommendation | Why |
|---|---|---|
| Weight | Finer than the top thread, usually No. 60–90 | Thinner embroidery, more thread per bobbin |
| Colour on light fabrics | White | Does not show through the fabric |
| Colour on dark fabrics | Black | Not visible if it comes through slightly at the front |
| Double-sided items | In the colour of the top thread | Both sides are visible – towels, scarves, flags |
When the embroidery is visible from both sides – on a towel, scarf or flag, for example – the bobbin thread must be the same colour as the top thread, and sometimes of the same type. In this case some workshops use the top thread in the bobbin as well.
How to check the tension: the "I" test
The easiest way to check whether the balance between the top and bobbin threads is right is the satin column test. Embroider a column a few millimetres wide (for example the letter "I") and turn it over. On the back:
- Correct: a strip of bobbin thread is visible in the middle, about one third of the column width, with top thread on either side.
- Too much bobbin thread (the strip is wide): the top tension is too tight or the bobbin tension too loose. There is a risk of the bobbin thread showing at the front.
- No bobbin thread visible: the top tension is too loose – there will be loops at the front and the embroidery will look sparse.
Bobbin tension is also checked with the "drop test": hold the bobbin thread with the bobbin case hanging and shake it gently. With correct tension the case slides down slowly rather than falling freely. Reference values differ by machine brand – follow the manufacturer's instructions.
Common problems with bobbin thread
- The bobbin thread shows at the front. The top tension is too tight or the bobbin is incorrectly placed in the case.
- Bird's nests and knots underneath. The top thread has not passed correctly through the tension unit or has slipped out of a guide. Check the top thread path first, not the bobbin.
- The thread runs out unexpectedly. Track the number of stitches per bobbin and change it before a long design.
- Lint in the hook. Clean the hook regularly, especially with cotton bobbin threads and fluffy fabrics.
- An unevenly wound bobbin. Causes jumps in tension. Wind at an even speed or use prewound bobbins.
Why you should not skimp on bobbin thread
It is tempting to use any thin sewing thread in the bobbin, since it is not visible. In practice an uneven or linty bobbin thread is one of the most common causes of downtime: breaks, uneven satin columns and puckered fabric. In series production every stop of a multi-head machine costs time, so a quality bobbin thread pays for itself.
You will find top threads, metallic and special threads in our embroidery threads category. For construction seams use sewing threads, and for the brand on the inside woven labels, which are sewn in after embroidery.
Bobbin thread and embroidery threads from Polkom
Polkom is a Bulgarian manufacturer of sewing accessories, with over 30 years of experience and more than 10,000 articles. We supply embroidery workshops with everything they need – top threads, bobbin thread and accessories from one manufacturer – and advise on the right combination for your machines and fabrics. We send samples and deliver throughout the EU. Minimum quantities depend on the article – send an inquiry via our Contact page.
Share this article














