Contents
Bone buttons with a logo are most often made by laser engraving: on light bone the logo gets a dark, clear and permanent outline. For a stronger effect, the grooves are filled with paint – black, brown or in the brand colour. Personalisation suits coats, jackets, uniforms and special series, and a sample is approved before production.
Why bone is an excellent base for a logo
Bone is dense, hard and has a fine, homogeneous structure. The laser leaves a clean edge in it, without blurring, which allows relatively small details. The light natural tone creates a strong contrast with the darkened engraving, and with colour fill the logo is visible from a distance. Compared with more porous materials such as wood or coconut, bone gives a more precise result with text and fine lines.
- high legibility of the logo;
- a durable engraving that does not wear off;
- the option of colouring in the brand colour;
- a luxurious, natural look.
Techniques for bone buttons with logo
Laser engraving
The beam removes a thin layer of the surface and leaves a recessed design in a dark brown tone. The depth is adjustable. The method is fast, precise and requires no tooling for each logo, so it is also suitable for smaller runs.
Engraving with colour fill
After engraving, the grooves are filled with paint and the excess paint is cleaned from the surface. The result is a contrasting logo – for example black on natural bone or white on dark-dyed bone. This is a classic look for uniforms, club blazers and brands with a heritage style.
Mechanical engraving and stamping
On some designs the relief is formed mechanically – with a milling cutter or during turning. This produces decorative borders, stars and dots around the rim. It is used less often for logos but suits ornaments.
Scorching and toning
The button is first scorched or toned for a vintage look and then engraved. Engraving on a darker base is softer and more organic.
What kind of logo is suitable
| Button size | Approximately, mm | What fits |
|---|---|---|
| 16L–20L | 10.2–12.7 | initials, a small symbol |
| 24L | 15.2 | monogram, short name |
| 28L–32L | 17.8–20.3 | symbol and name, lettering around the edge |
| 36L–40L | 22.9–25.4 | a more detailed logo, crest, year of founding |
- leave a margin between the logo and the rim;
- on buttons with holes, place the graphic around them or in a ring around the edge;
- shank buttons give the whole face surface to the logo;
- avoid very thin lines under 0.2–0.3 mm on small buttons;
- text should be in a simple, bold typeface.
Preparing the file
- Vector file – AI, EPS, PDF or SVG.
- Fonts converted to outlines.
- A one-colour version of the logo.
- If there is colour fill – the colour code in Pantone or RAL.
- A sketch of the placement on the button and the size of the engraving.
The process to the production batch
- Inquiry with the logo, the button design, the sizes and the quantity.
- Technical proposals – size and position of the engraving, with or without colour fill.
- Sample on a real bone button.
- Approval or corrections – depth, contrast, paint colour.
- Series production and checking against the approved sample.
The price depends on the button size, the area and complexity of the engraving, the colour fill, the button finish and the quantity. Send a request for a quote with all the parameters at once.
Where logo buttons have the greatest effect
- Coats and outerwear – large, visible buttons.
- Uniforms – hospitality, restaurants, schools, clubs.
- Made-to-measure tailoring – the atelier's name on the sleeve button or on the back.
- Knitwear and cardigans – a small monogram on natural bone.
- Bags and leather goods – a closure button as the brand's mark.
Logo on the back and hidden details
Not every brand wants the logo on the face. On classic jackets and coats, a more refined option is to put the engraving on the back of the button – visible only to the owner of the garment. Another option is to leave the face clean and add fine lettering or a series of dots around the rim. On shank buttons the logo can also be placed on the base of the shank. These solutions are particularly suitable for premium collections, where the button should look classic and the brand mark should be a detail for connoisseurs. Discuss the options at the sample stage, because the position affects the technique and the processing time.
Coordinating with other brand elements
When a button carries a logo, it must be in sync with the labels, hang tags and packaging. Use the same version of the logo, similar proportions and tone. A natural bone button with dark brown engraving sits naturally next to a leather label with a debossed logo and a kraft-toned hang tag.
Common mistakes
- approval based only on a visualisation, without a physical sample;
- a logo that is too detailed for a small button;
- a paint colour that has not been wash-tested;
- different button batches for one style, leading to differences in the base tone.
You can browse the available designs in the bone buttons category, and other materials for engraving in engraved buttons.
Personalised buttons from Polkom
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags, based in Sofia, with more than 10,000 articles. We engrave logos on bone buttons, offer colour fill for the engraving, make samples quickly and deliver across the EU. Send the vector file and the parameters via our contact form.
Share this article














