Contents
Men’s button-on braces (suspenders) attach to six buttons sewn on the inside of the trouser waistband – four at the front and two at the back. The buttons are flat, with two or four holes, around 22L–26L (14–16.5 mm), so that they pass through the leather or textile tabs of the braces. This method of attachment holds the trousers more securely than clips and does not damage the fabric.
Button-on or clip-on braces
| Criterion | Button-on | Clip-on |
|---|---|---|
| Attachment | Tabs that fasten to buttons on the waistband | Metal clips gripping the edge of the waistband |
| Stability | Do not slip, even load distribution | Can come loose during movement |
| Effect on the fabric | Leave no marks | Can leave imprints or wear the fabric |
| Versatility | Trousers with sewn-on buttons are needed | Suit any trousers |
| Style | Classic, formal | Casual |
In classic tailoring, button-on braces are considered the right choice with a suit and a tuxedo. Trousers designed for braces often have no belt loops.
Men’s button-on braces: where the buttons are sewn
At the front
At the front, two pairs of buttons are sewn on – one on each side. Each pair is usually positioned roughly above the front crease of the trouser leg, with the two buttons of the pair a few centimetres apart. This distributes the weight and the trousers hang straight.
At the back
At the back, two buttons are sewn on symmetrically on either side of the centre seam. On classic trousers for braces, the back of the waistband is often raised in a “fishtail” shape so that the braces can be attached higher and the trousers sit securely.
Inside or outside
On formal trousers the buttons are on the inside of the waistband and are not visible. On workwear, retro and folk-inspired styles, as well as some casual trousers, the buttons are on the outside and become part of the design.
Button size and type
- Size: 22L–26L, about 14–16.5 mm. Large enough to hold the tab, but not so large that it shows under the waistband.
- Profile: flat, without a raised centre – the button should not create a bulge under the shirt.
- Holes: two or four; four holes give stronger attachment.
- Material: for inside buttons, strong polyester or urea buttons are used; for outside buttons, metal, horn or corozo, matching the other accessories.
- Colour: for inside buttons – matching the fabric or the waistband lining; for outside buttons – as an accent.
Browse the polyester buttons for inside positions and the metal buttons for outside buttons on workwear and retro styles.
Sewing that lasts
Brace buttons carry a constant load, so they must be sewn on more securely than usual:
- Use strong polyester thread.
- Reinforce the waistband on the inside with extra interlining or tape where the buttons go.
- Sew on with a small thread shank so the tab can pass under the button.
- Make more passes through the holes than for a decorative button.
- Secure the knot on the inside so it does not rub against the shirt.
Brace tabs
Button-on braces end in tabs made of leather or dense woven fabric. Leather tabs are more formal and durable, while textile tabs are lighter and often found on evening styles. At the front the braces usually split into two tabs that fasten to the pair of buttons, and at the back they join into one strap or form a Y or X shape. The buttonhole in the tab must match the diameter of the button.
Braces and buttons as part of the collection
For brands offering suits and formal trousers, braces are a logical addition to the collection. If the trousers are made with inside brace buttons, the customer has a choice: to wear the trousers with a belt or with braces. It is a small detail in production, but it adds value and shows attention to classic tailoring.
When the brand also makes its own braces, it is a good idea for the trouser buttons and the metal parts of the braces – buckles, adjusters, tips – to be in one tone. This way the set looks coherent. Outside brace buttons on casual and workwear styles can carry an engraved logo and become a recognisable brand detail.
Braces on children’s, work and uniform trousers
The button principle is also used on dungarees, work trousers and uniforms. There the buttons are often metal and on the outside, and the braces have an adjustable buckle. On children’s styles, lighter buttons and wider tabs that a child can fasten easily are preferred.
Common mistakes
- buttons with a domed profile that show under the shirt;
- sewing without reinforcing the waistband – the button tears off together with the fabric;
- buttons that are too small, from which the tab slips off;
- asymmetric placement of the back buttons;
- brace buttons forgotten in the specification for tuxedo trousers;
- inside buttons in a contrasting colour that show through light fabric.
Brace buttons from Polkom
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags from Sofia with over 30 years of experience. In the men’s buttons section you will find buttons for trousers, suits and braces, and to order we make styles in colours matched to a sample and with a logo. We also offer button attaching as a service. Write to us via the contact page.
Share this article














