Contents
Coconut buttons with a logo are made by laser engraving: the beam vaporises a thin layer of the shell and leaves a darker, permanent outline of the brand. The method works well for simplified logos, monograms and short lettering, needs no ink and does not wash off. Before production, a sample is made so that the size, position and contrast can be approved.
Why brands choose coconut buttons with a logo
The button is a small detail that the customer touches every time they put the garment on. If it carries the brand's mark, it works as a quiet signature – especially on shirts, linen suits and knitwear, where there are no visible logos on the fabric. The coconut shell also adds the message of a natural material: the engraving looks as if it has been burnt into the wood, not printed onto plastic.
- the logo is permanent and does not peel off;
- no paints or adhesives are used;
- every button stays slightly different because of the natural pattern;
- the button reinforces brand identity without additional labels.
How laser engraving on coconut works
The laser burns away a thin layer of the surface in a controlled way. The result is a slightly recessed, darker design with a warm, smoky tint. Depth and intensity are adjusted through power and speed. On polished buttons the contrast is sharper, on natural matte ones softer. If the button is lacquered after engraving, the lacquer also seals the engraving and makes it more resistant to dirt.
Engraving with colour fill
For stronger contrast, the recesses can be filled with paint – for example light paint on dark coconut. This gives a more legible mark, but adds a step to production and requires a wash-resistance test.
Which logo suits a coconut button
The surface of coconut shell is porous and veined, so not every graphic transfers well. Practical rules:
- Simplify the graphic. A monogram, initials or a symbol read better than a complex emblem.
- Avoid very thin lines. They get lost in the texture.
- Limit the text. One word or a short name is the maximum for a small button.
- Leave a margin to the edge. The engraving must not touch the edge or the holes.
- Think about the holes. On buttons with 2 or 4 holes, the logo is placed around them or as a border around the periphery.
Engraving size relative to the button
| Button size | Approximate diameter | Logo recommendation |
|---|---|---|
| 16L–18L | about 10–11.5 mm | initials, small symbol, dotted border |
| 20L–24L | about 12.5–15 mm | monogram, short name around the holes |
| 28L–32L | about 18–20 mm | brand mark, lettering around the periphery |
| 36L and above | about 23 mm and up | more detailed graphics, mark and text combined |
The millimetre values are calculated using the standard 1L = 0.635 mm and are approximate; a specific style may have a wider rim, which reduces the usable area.
Which file to send
- a vector file – AI, EPS, PDF or SVG, with lines converted to outlines;
- a single-colour version of the logo (the laser works in one tone);
- the desired button diameter and number of holes;
- the position – centred, around the periphery, around the holes;
- if available – a photo or sketch of the garment so we can see the context.
If you only have a raster image, it is still possible to work with it, but the logo usually has to be redrawn as a vector, which lengthens the preparation.
From inquiry to production batch
- You send the logo, the button style and the approximate quantity.
- We suggest the size and position of the engraving, with a visualisation if needed.
- We make a sample on a real coconut button.
- You approve the sample or ask for corrections – deeper engraving, a larger mark, a different position.
- Production starts according to the approved reference.
The price depends on the button size, the complexity and area of the engraving, colour fill and quantity – so personalisation is always quoted individually. Send a quote request and give all parameters at once.
Where a logo on the button has the greatest effect
Not all the buttons on a garment have to be engraved. Many brands put the mark only on the visible front buttons and use the same style without a logo for the cuffs and spare buttons. Another option is to engrave only the top button or the pocket button. This keeps the accent while the batch is split into two positions, which should be stated at the inquiry stage.
Engraved coconut buttons combine well with the other brand elements – a woven neck label, a leather or cardboard hang tag. When the tones and logo style are the same everywhere, the garment looks finished and recognisable even without a large print on the fabric.
Common mistakes when ordering coconut buttons with a logo
- approving the logo only on screen, without a physical sample;
- text that is too small and becomes a blot on the button;
- ignoring tone differences – on lighter buttons the engraving has more contrast, on dark ones it gets lost;
- no wash test when the engraving is colour-filled.
You will find the styles that can take a logo in the coconut buttons category. If you are looking for engraving on other materials, see engraved buttons or natural wooden buttons.
Personalised buttons from Polkom
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags based in Sofia, with over 30 years of experience and more than 10,000 articles. We engrave logos on coconut buttons, make samples quickly and deliver across the EU. Send the logo file and the parameters via the contact form.
Share this article














