Contents
Concealed zips for dresses are usually made with a fine nylon coil (most often size 3) and come in lengths typically between 40 and 60 cm for back seams, and around 20–30 cm for side seams. The tape colour should match the fabric as closely as possible, and the zip should be a few centimetres longer than the opening. This ensures easy dressing, with only the small pull visible.
Why concealed zips are standard for dresses
The silhouette line is crucial for dresses. Visible zips with exposed teeth break this line, so concealed zips are almost always used for formal, evening, cocktail, and everyday dresses. They are sewn into the seam so that from the outside the seam looks continuous. Concealed zips are lightweight, flexible, and do not create a hard edge along the back or waist.
Where to place the zip on a dress
Back centre seam
The most common option. The zip starts at the neckline or upper back edge and extends down to the waist or below. It allows a wide opening and easy dressing, especially for fitted styles.
Side seam
Used when the back must remain clean – for designs with deep back necklines, draping, or decorative elements. The zip is placed under the arm and extends to the hip. The opening is shorter, so the dress must have enough ease or stretch.
Zips in sleeves and details
Short concealed zips are used in tight sleeves, at the hem of fitted dress skirts, and in corsets where cutting without a zip would make dressing difficult.
How long should the zip be for a dress
| Dress style and position | Approximate length |
|---|---|
| Dress with back zip to waist | 35–45 cm |
| Dress with back zip to hip | 50–60 cm |
| Evening or bridal dress, zip below waist | 55–65 cm and longer |
| Side zip | 20–30 cm |
| Zips in sleeves | 10–15 cm |
Measure the opening on the finished dress—from the top seam (neckline or facing) to the point where the body passes freely. Add 2–3 cm because the foot cannot sew right up to the slider, and the excess remains under the seam. For size ranges, length is calculated per size or size groups.
Colour of concealed zips for dresses
Although concealed, the tape edge and pull can show when moving. Therefore, colour is important:
- Tone-on-tone with the fabric – the main rule. Choose by physical sample in daylight.
- For patterned fabrics – select the background colour or the darkest dominant shade.
- For sheer fabrics – the tape may be visible; pick the closest tone to the fabric or lining, depending on which shows more.
- Pull – usually matches the tape colour, but metal, mother-of-pearl, or decorative pulls are used for evening dresses.
Concealed zips for bridal and evening dresses
Bridal and evening dresses endure significant stress—the corset is fitted, the fabric heavy, often embroidered, lace or sequined. Therefore:
- choose a quality concealed zip with smooth operation and strong tape;
- reinforce the zip area with fusible tape and, if needed, an additional inner tape;
- consider combining the concealed zip with an internal hook-and-eye closure at the top to relieve tension;
- for elaborate designs, the zip is often covered with a decorative row of buttons with loops—the zip is functional, buttons are decorative.
Internal fasteners like wire hooks and eyes are suitable to relieve stress above the zip.
Fabrics and special considerations
- Silk, chiffon, georgette – very delicate; use a fine needle and fusible tape, sew slowly.
- Satin and taffeta – prone to puckering; reduce presser foot pressure.
- Knit and jersey – stretch; stabilise seam allowances carefully.
- Lace – sew the zip to the underlining fabric, then hand-apply the lace overlay.
- Velvet – the pile slips; secure with extra pins or hand basting.
Common mistakes with dress zips
- The zip is exactly the length of the opening, making dressing difficult.
- The tape colour differs and is visible when moving.
- The seam below the zip bubbles because it does not start exactly at the last stitch.
- Horizontal seams and waistline do not match on both sides of the zip.
- The lining is sewn too close to the coil and the slider catches it.
How to order concealed zips for a dress collection
When sewing a dress collection in multiple colours and sizes, prepare a zip specification before ordering. This prevents errors and helps the manufacturer select exact shades:
- lengths by size or size groups;
- colours with physical fabric samples or Pantone references;
- type of pull – standard matching tape colour, metal, or decorative;
- coil size, if fabric is very fine or heavier;
- approximate quantity by colour and length.
With such a specification, samples are usually approved on the first try.
Concealed zips for dresses from Polkom
Polkom manufactures wholesale concealed zips for dresses in various lengths and a wide colour palette, matching shades to fabric samples. We also offer original YKK concealed zips for demanding designs. Send a request with your lengths and colours for your collection – we will prepare samples.
Share this article














