Contents
Copper rivets are the classic on blue jeans: they do not rust, withstand repeated washing and develop a warm patina over time. Brass rivets are slightly harder, have a yellower tone and are used when a golden or vintage look is wanted. Aluminium rivets are lighter and more economical, but softer, while steel rivets are strong but need a good finish against corrosion.
Copper rivets – why they are a classic
Copper is a soft, ductile metal that sets easily and grips the post tightly. It does not rust, but darkens over time and develops a patina – an effect that in denim is perceived as a sign of authenticity. That is why copper rivets and the “antique copper” finish are the most common choice for classic jeans, denim skirts and jackets.
Copper also has a drawback: in contact with moisture and certain chemicals, it can leave a greenish or brownish tint on the fabric around the rivet, especially on light fabrics. That is why a different finish is often preferred for white and beige denim.
Brass rivets
Brass is an alloy of copper and zinc. It is harder than pure copper, keeps its shape when stamped and gives a crisp relief to the logo. Its tone is yellower and more “golden”, and with an antique treatment it looks like old gold. Brass also does not rust and copes well with washing, which makes it suitable for both workwear and bags.
Aluminium rivets
Aluminium is light and does not rust. Aluminium rivets are used on lighter products and when price is the main factor. They are softer and deform more easily under heavy load or with an imprecise press. Finishes on aluminium are mostly achieved by anodising or lacquering, which gives a wide choice of colours.
Steel rivets
Steel is strong and hard, but corrodes without a protective finish. For rivets it is used less often, usually for parts that must withstand heavy loads. If the finish is damaged during setting or by aggressive washing, rust stains can appear on the fabric – which is why steel parts require particularly careful testing.
Comparison of materials
| Material | Strength | Corrosion | Look | Suitable for |
|---|---|---|---|---|
| Copper | Medium, ductile | Does not rust, develops a patina | Reddish, warm | Classic blue jeans |
| Brass | Good | Does not rust | Yellow, golden | Denim, workwear, bags |
| Aluminium | Lower | Does not rust | Light, coloured finishes | Light products, decoration |
| Steel | High | Corrodes without a finish | Depends on the finish | Heavily loaded points |
Finishes on copper and brass rivets
The base metal determines strength, and the finish determines colour and style. The same copper or brass rivets can be:
- natural or polished copper – a bright, warm tone;
- antique copper and antique brass – darkened recesses and worn edges, a vintage look;
- nickel colour and matte nickel colour (nickel free) – a silvery look for black, grey and light denim;
- gunmetal and black – modern, dark collections;
- gold – statement and fashion items.
For items in prolonged contact with the skin, attention is paid to nickel release, which is restricted in the EU by the REACH regulation. All Polkom metal finishes are nickel free, including nickel and black nickel, which are only colour names.
How the materials behave in the wash
Stone, enzyme and chemical washing of denim also affect the metal parts. Copper and brass usually react by darkening or by the finish wearing off at the edges – an effect that is often desired. Lacquered and coloured finishes can peel if they are not intended for such treatment. So the rule is simple: test a sample of the rivet together with the fabric and the actual wash recipe before starting the production run.
How to choose the rivet material
- Define the style – classic, vintage, modern or workwear.
- Take the fabric colour into account – copper for blue denim, nickel colour or black for black and grey.
- Assess the load – for workwear and bags choose brass or a more substantial model.
- Check the washing process and test the sample.
- Select metal buttons and snap buttons in the same finish so that the metal accessories are consistent.
Compatibility between materials
When different metals meet in one product, for example a steel base and a brass cap, or rivets next to a metal zip, galvanic corrosion is possible in damp conditions – the more active metal gradually deteriorates. In practice this is rarely a problem in clothing, but for outdoor products, marine conditions or workwear that is often wet, it is sensible for all metal parts to be made of the same or compatible material. So in your inquiry, also state what other metal accessories the product has.
Copper rivets and costs
The price of a rivet depends on the material, the weight of the part, the finish, whether there is a logo and the quantity. Copper and brass are generally more expensive than aluminium, and antique and special finishes add a processing step. Rather than choosing on price alone, compare the risk of rejects and complaints – a cheap rivet that comes loose or leaves stains ends up costing more. For specific terms, send a request for a quote.
Copper and brass rivets from Polkom
In the rivets category you will find models in copper, brass and other materials with various finishes. Polkom is a manufacturer with over 30 years of experience – we also make rivets to your design, with the logo and finish of your choice, and prepare samples before the production run. Send an inquiry via the contact page.
Share this article














