Cord Stopper Size Guide by Cord Thickness – Table and Tips

Polkom · 4 min read
Cord Stopper Size Guide by Cord Thickness – Table and Tips

The correct cord stopper size depends on the hole diameter, not the external dimensions of the stopper body. The hole should be equal to or slightly larger than the cord diameter: this way, when the button is pressed, the cord passes freely, and when released, the spring grips it securely. For most garment cords, stoppers with a hole diameter of about 3 to 6 mm are used, while backpacks and outdoor gear require larger sizes.

Important stopper dimensions

Each stopper specification includes several measurements that can be confusing:

  • Hole diameter – the most important parameter, indicating the cord size that fits through.
  • Body length or height – how much the stopper protrudes and how easy it is to grip.
  • Body width – especially important for stoppers with two holes and flat models.
  • Button travel – how far the button must be pressed to align the holes.

When comparing models, always compare the hole diameter first. Two stoppers with identical bodies can have very different hole sizes.

How to measure your cord

  1. Use a caliper, not a ruler. For cords between 3 and 6 mm, a half-millimeter difference matters.
  2. Measure the cord at rest, without stretching or compressing it with the caliper jaws.
  3. Measure at several points – braided cords are not perfectly round.
  4. For flat cords, record both width and thickness.
  5. For elastic cords, measure both at rest and slightly stretched, as they thin when stretched.

Record these measurements in your technical sheet along with the cord type (braided, woven, elastic) and material. This helps ensure the stopper remains suitable for future orders or if you change cord suppliers. If you don't have a caliper, the safest option is to send a few centimetres of the cord to the manufacturer. This is standard practice in garment production.

Reference table: stopper size by product type

ProductTypical CordStopper Hole Diameter
Jewellery and packaging bagsThin, about 2–3 mmSmall, about 3 mm
Sweatshirts and hoodiesBraided, about 4–5 mmAbout 4–5 mm
Jackets – waist and hemRegular or elastic, about 3–5 mmAbout 4–5 mm
Ski and outdoor garmentsElastic or braided, about 3–6 mmAbout 5–6 mm, comfortable body
Backpacks, bags and casesElastic, about 4–8 mmAccording to cord, often larger

This table is a guideline. The final choice should always be tested with the actual cord, as the density of the braid, stiffness, and surface affect grip.

Stopper size for flat cords

Flat cords do not fit into a round hole the same way as round cords. They fold or sit diagonally, making the grip unpredictable. For flat cords, two solutions exist: a stopper with an oval or rectangular hole, or a round hole sized so the cord can fold slightly lengthwise. The second option works for soft, thin flat cords but not for stiff woven tapes.

Elastic cords and hole size

For elastic cords, it is better if the hole diameter is at the lower limit. Under tension, the cord thins, and if the hole is too wide, the stopper will slip. Check the grip with the cord stretched, not just at rest. This is important for backpacks, luggage nets, and sportswear where the cord is constantly under load.

Signs the size is wrong

  • Hole too large: the stopper slips on its own, especially during washing or tension.
  • Hole too small: the cord barely passes even when the button is pressed, the braid frays, and the spring wears out quickly.
  • Unsuitable body size: the stopper fits the hole but is too small to press with gloves or too large for delicate garments.

Clearance between cord and hole

A good practical rule is that the hole diameter should be between the cord size and about 1 mm larger. Soft braided cords compress easily and work well even if the hole equals their diameter. Stiff cords with dense covers and cords with smooth polyester surfaces need a bit more space; otherwise, the button requires strong pressing. Also, consider shrinkage: cotton cords thicken and harden after the first wash, while synthetic cords change size very little. If your collection uses cotton cords, test the stopper after washing too.

Body size relative to the product

Once the hole diameter is chosen, consider the body size. For children's clothing and lightweight sweatshirts, a smaller, rounded stopper is more comfortable and safer. For ski jackets and workwear, a larger body that can be pressed easily with gloves is better. In fashion products, body size is often a design choice – a visible metal stopper can be more massive to look proportional next to cord ends and metal details.

You can find cords of various thicknesses in the cords for garments category, and stoppers with different hole sizes in the cord stoppers section.

Size selection assistance from Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear, and bags based in Sofia. We can help you select a stopper and cord set so that the sizes match from the first sample. Send us a piece of cord or its specification, the product type, and desired material via the contact page. Minimum order quantities depend on the item.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What stopper size do I need for a 4 mm cord?
For a cord around 4 mm, a stopper with a hole diameter of approximately 4–5 mm is usually chosen. If the cord is soft and braided, a smaller hole provides a more secure grip; if it is stiff or has a smooth cover, a slightly larger hole may be needed. Testing a stopper sample with the actual cord is the safest approach.
How can I determine the hole size of a stopper I already have?
Fully press the button and measure the hole with the internal jaws of a caliper, or pass drill bits or cords of known diameter through it. If you lack tools, send us the stopper or a photo with a ruler next to it, and we will help you find a suitable model.
Can one stopper be used for cords of different thicknesses?
Within small limits, yes. The spring compensates for a difference of about half to one millimeter. Beyond that, the stopper either does not hold or the cord does not pass through. If your collection includes cords of varying thickness, it is better to choose separate stopper models for each.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.