Garment Manufacturing in Bulgaria – Workshops and Accessories Workflow

Polkom · 4 min read
Garment Manufacturing in Bulgaria – Workshops and Accessories Workflow

Garment manufacturing in Bulgaria is usually organised under one of two models: CMT, where the brand supplies the fabric, accessories and labels, and the workshop cuts and sews; or full package, where the garment manufacturer also provides the materials. In both cases, someone must select, order and approve buttons, zips, labels, elastics and threads. Clear responsibility allocation is one of the most important parts of the contract with the workshop.

Garment manufacturing in Bulgaria: the two models

CMT (Cut, Make, Trim)Full Package
Who supplies fabricThe brandThe workshop
Who supplies accessoriesThe brandThe workshop, per brand specifications
Control over designFullDepends on specifications and approvals
Organisation effort for brandMoreLess
Suitable forBrands with clear vision and own suppliersBrands wanting one partner for everything

There are also mixed variants: the brand supplies fabric and branded accessories, while the workshop provides standard haberdashery such as threads, interlinings and elastics.

Who supplies haberdashery

Haberdashery and accessories are divided into two groups depending on their impact on the brand.

Branded and visible accessories

Main labels, composition labels, hang tags, logo buttons, sliders, metal logo plates, zips matching the fabric colour. These define the brand’s look and are usually ordered by the brand itself, even in full package – or at least approved by it.

Technical and invisible materials

Sewing threads, interlinings, elastics in seams, reinforcing tapes. These are often supplied by the workshop because it knows what works on its machines. The brand sets requirements – colour, type, certificates – and approves.

How the workshop–accessories supplier chain works

  1. The brand creates the tech pack with all accessories, sizes, colours and positions.
  2. The accessories supplier sends samples to the brand and, if needed, to the workshop.
  3. The workshop sews a prototype with the actual accessories and tests their behaviour on the machines.
  4. The brand approves the accessories and places the order.
  5. The supplier delivers directly to the workshop, packed by model and colour.
  6. The workshop performs incoming inspection and reports deviations.

The most common obstacle is communication: the brand talks to the supplier, but the problem is detected in the workshop. Best practice is for the workshop to have direct contact with the supplier for technical questions, while the brand approves visual aspects.

Garment workshops in Sofia and across Bulgaria: what to ask

Many brands search for “garment workshop Sofia”, but workshops with different profiles operate nationwide. Location matters for visits and control, but other questions are decisive:

  • What products does the workshop sew – knitwear, woven fabrics, outerwear, lingerie, workwear?
  • What equipment is available – button and eyelet machines, presses for snap buttons and eyelets, machines for invisible zips?
  • Does it work on CMT, full package or both?
  • What quantities does it accept per model?
  • Who is responsible for incoming accessories inspection?

The answer about equipment is also important for choosing accessories: if the workshop lacks a die for a certain snap button size, it’s better to choose another size or provide the die in advance.

Made-to-order garment production: who is responsible for errors

When the brand supplies accessories, it is responsible for their quality and timeliness. When the workshop supplies them, it is responsible. Include in the contract:

  • Who orders and pays for each accessory.
  • Who approves samples.
  • Who performs incoming inspection and the timeframe for claims.
  • What reserve is planned for defects during sewing.
  • What happens with leftovers after the series.

Workshop and accessories supplier: advantages of proximity

When both the workshop and accessories supplier are in Bulgaria or the EU, samples travel fast and additional quantities can be delivered without customs procedures. This is especially useful for small and medium series, where orders are more frequent and schedules tighter. A local supplier can send samples directly to the workshop and, in urgent cases, extra quantities for halted models.

Accessory set per model: how to provide it to the workshop

A convenient tool is the “accessories card” – one sheet per model travelling with the patterns and fabric. It includes a photo or sketch of the model with marked positions, a list of all accessories with code, size, colour and quantity per garment, a note which are branded and must be kept separate, plus attached samples: button, zip piece, label. The sewer immediately sees what goes where, and quality control has a reference when inspecting finished garments.

The card is also useful for the supplier: it helps pack accessories into sets by model. This way the workshop does not manually sort hundreds of packages but receives ready sets for each order. In CMT this saves time and reduces the risk of buttons for one model being sewn on another. It’s good for the card to have version and date to clarify the current one if specifications change after the prototype.

Documents in Bulgarian garment production

Wherever sewing takes place, the brand is responsible for product compliance on the EU market. Keep accessory certificates in the model file – for example OEKO-TEX® – REACH declarations and label texts. If the workshop supplies some materials, request their documents as well.

Garment accessories from Polkom for workshops and brands

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags based in Sofia with over 30 years of experience. We do not sew garments but supply brands and garment workshops in Bulgaria and Europe with buttons, zips, labels, haberdashery and metal accessories – from stock and custom logo orders, with fast samples and direct delivery to the workshop. Browse the accessories category and send your specification via the request form.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What is CMT in garment manufacturing?
CMT (cut, make, trim) is a model where the brand supplies fabric, accessories and labels to the workshop, which performs cutting, sewing and finishing for a labour fee. It gives the brand full control over materials and design but requires it to organise timely deliveries.
Who should order the labels – the brand or the workshop?
Usually the brand, because labels carry the logo, mandatory information and product compliance responsibility. Even in full package, the brand must approve design and text. The workshop can order composition labels based on brand data but the final text should be checked and approved in writing by the brand.
Can the accessories supplier deliver goods directly to the workshop?
Yes, this is common and saves time. Specify the workshop address, contact person and packaging method – by model, colour and size. Inform the workshop when to expect the shipment and what to check upon receipt. Documents and invoice can be sent to the brand, goods to the workshop.
What should I check about the workshop’s equipment regarding accessories?
Ask what button and eyelet machines the workshop has, whether it has presses and dies for snap buttons, eyelets and rivets, a machine and foot for invisible zips, and suitable machines for elastic. If the chosen accessory requires equipment the workshop lacks, it’s better to change the accessory or provide the tool in advance.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.