Heraldic motifs for crest buttons – how to prepare your crest for relief and enamel

Polkom · 4 min read
Heraldic motifs for crest buttons – how to prepare your crest for relief and enamel

Crest buttons carry the symbols of a club, school, family or brand onto a blazer, uniform or coat. A heraldic motif, however, was created for a flag, seal or document – on a button 15–20 mm across it has to fit into a much smaller space and still read in relief. In this article you will see which motifs work best and how to prepare the file so that you get a clean, recognisable crest from the very first sample. For ready-made designs, see also the article metal crest buttons.

The most common heraldic motifs

  • shield – the main frame of the crest; on small buttons often only the outline of the shield remains, with one symbol inside;
  • crown – emphasises prestige and tradition; looks good above the shield or on its own;
  • lion and lion's head – a classic motif for blazers and uniforms; the lion's head suits small sizes better than the full figure;
  • laurel or oak wreath – frames a monogram or a founding year;
  • anchor – nautical and yacht club blazers, see also nautical anchor buttons;
  • monogram and initials – often combined with a wreath or crown;
  • crossed elements – swords, keys, oars or arrows, typical of club and institutional crests.

How to simplify the crest for a small size

The smaller the button, the fewer details it can carry. On sleeve buttons the details are the first to merge. That is why it is a good idea to have two versions of the motif – a full one for the front buttons and a simplified one for the sleeves.

Button sizeWhat is keptWhat is simplified
32L (around 20 mm) – frontshield, main figure, crown, wreathfine lettering, small decorative lines
24L (around 15 mm) – sleeveoutline of the shield and one main figurewreath, lettering, internal divisions of the shield
Below 20Lsilhouette or monogramalmost all secondary details

Preparing the file

Vector format

Send the crest as a vector file (AI, EPS, PDF or SVG) with the text converted to outlines. We can also work from a raster image, but the motif has to be redrawn first, which lengthens the process. You will find detailed tips in the article preparing a logo for engraved buttons.

Lines and spacing

Thin lines and small openings in the motif must be wide enough to be made in the mould and not fill up with plating. If the crest has many fine hatchings, we usually replace them with solid areas or with a difference in relief level. The technologist will show you which areas will be adjusted at the drawing stage.

Relief levels

Heraldic motifs look best on two or three levels: background, main figure and the highest details (crown, shield border). The different levels catch the light differently, and the crest reads even without colour. With zinc alloy metal buttons a deeper and more detailed relief is achieved, while stamped brass buttons give a shallower, finer relief.

Crest colours – enamel and finishes

If the crest has colours, they can be reproduced with enamel applied in the recessed fields between the metal outlines. Colours are matched to Pantone. With several colours, the metal borders between the fields should be clearly defined so that the colours do not mix. You can read more about the technique in the article enamelled crest buttons.

The metal part can be gold, silver, antique brass, antique silver, gun metal or black. Polished gold is the classic for navy blazers, while antique finishes emphasise the relief because they darken in the recesses. All Polkom metal buttons are nickel free – with us, "nickel" is only the name of a silver-tone colour.

Button rim and shape

  • smooth raised rim – frames the crest and protects the relief from wear;
  • rope or beaded rim – more decorative, suitable for ceremonial uniforms;
  • domed or flat shape – a dome reflects light more strongly and gives the motif volume.

What to send together with the crest

  • the sizes of the front and sleeve buttons – for example 32L and 24L, or 30L for smaller front buttons;
  • the number of buttons per garment and the total quantity for the production run, so that we can plan the mould and the finish;
  • the fabric colour or a sample of it – the finish and enamel are chosen against the background on which the button will be worn;
  • the crest colours in Pantone, if there will be enamel;
  • the attachment type – a shank button for blazers and uniforms, or holes for more casual garments.

The more complete the information, the faster the technologist can prepare a drawing for approval and the fewer corrections are needed after the first sample.

From crest to production run – how we work

Polkom is a manufacturer of metal crest buttons made to your design. The technologist prepares the drawing and suggests adjustments for the small sizes, after which we make samples for 50–100 €. The minimum quantity is 1000 pcs per design, and the production run is ready 10–20 days after sample approval, with delivery across Europe. See also our engraved buttons if you are looking for a lighter way to put your brand on a button.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

Can the whole crest fit on a sleeve button?
Usually not – for 24L sleeve buttons (around 15 mm) a simplified version is made with the outline of the shield and one main figure.
In which format should I send the crest?
Ideally as a vector file – AI, EPS, PDF or SVG, with the text converted to outlines. A raster file also works, but the motif has to be redrawn first.
Can the crest be in colour?
Yes, the colours are reproduced with Pantone-matched enamel applied in the recessed fields of the relief.
Do buttons with a nickel-colour finish contain nickel?
No. All Polkom metal buttons are nickel free; "nickel" is only the name of the silver-tone colour of the finish.
What is the minimum quantity for crest buttons?
The minimum quantity is 1000 pcs per design, samples cost 50–100 €, and the production run is made within 10–20 days after approval.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.