Contents
Garment poly bags in clothing production are most often made of clear polyethylene (LDPE) around 25–50 microns thick, with a self-adhesive strip on the flap. The size is set by the folded item plus room for closing, and the bag usually carries a suffocation warning, a recycling symbol and, if required, the brand logo. Below are the key parameters and what to specify when ordering.
What the standard garment poly bag is
It is the flat bag with a flap and adhesive strip in which the factory places each item after pressing and inspection. It protects the garment from dust and dirt in the warehouse and in transit, lets the goods be identified by the label without opening, and closes quickly at the packing table. Bags with a press-seal zip or slider, which the customer reuses many times, are a different product – for those, see the article zip bags with logo for clothing.
Material: LDPE, PP and recycled polyethylene
- LDPE (low-density polyethylene) – soft, flexible, does not tear easily and does not rustle much. The most widely used material for garment bags.
- PP (polypropylene) – crystal clear and stiffer, with a gloss. It is chosen when the garment must look flawless through the bag, for example shirts in a shop.
- Frosted polyethylene – translucent, with a more modern look; the product shows through slightly.
- Recycled polyethylene – available on inquiry; it may have a slight tint compared with virgin material.
If you are considering a fully paper-based alternative, the comparison is made in the article paper or plastic packaging for an online shop.
Thickness in microns
Film thickness is given in microns (µm) and determines strength, clarity and feel.
| Thickness (approximate) | Character | Typical use |
|---|---|---|
| 25–30 µm | light, economical | T-shirts, underwear, socks |
| 35–40 µm | all-purpose | shirts, blouses, dresses, trousers |
| 50 µm and more | heavy, more puncture-resistant | jackets, jeans, items with metal accessories, longer storage |
Garments with metal buttons, buckles or rivets easily pierce thin film in transit, so choose a greater thickness for them.
Garment poly bags: sizes by item
The size is given as width × height, excluding the flap. Measure the garment as it will be folded and add about 2–4 cm of free space in width and height.
| Item | Approximate bag size |
|---|---|
| Socks, underwear | 15×20 to 20×30 cm |
| T-shirt | 25×35 to 30×40 cm |
| Shirt folded on a board | 30×40 to 35×45 cm |
| Trousers, jeans | 35×45 to 40×50 cm |
| Jumper, hoodie | 40×50 to 45×55 cm |
| Jacket | 45×60 cm and more |
The adhesive flap is usually 4–6 cm. If a card or insert goes in as well, allow a little more room.
Markings on the bag
Warning text
It is common practice to print a suffocation warning on garment bags – for example "Keep this bag away from children" – in the languages of the markets where the goods are sold. Check the requirements of each market, because they differ.
Recycling symbol
The triangle symbol with the material code (4 for LDPE) helps the end customer dispose of the bag correctly. With recycled material, brands often add a short explanatory note too.
Warehouse information
Besides the logo, the bag can carry a field for size, article number or space for a barcode sticker. The goods are then identified without opening, and picking errors go down.
Air holes and other details
- Air holes – small perforations that let air escape during packing so the bags stack flat.
- Euro slot – a hang hole at the top for display on a hook.
- Resealable strip – for online parcels, it makes returns easier.
Logo printing
The logo is printed in one or more colours, matched to Pantone. On a clear bag, solid dark print or a white underlay beneath a coloured logo shows most clearly. Position the logo where it will not cover the garment label. If you pack in a bag and a cardboard box, coordinate the colours of both elements.
How to pack a shirt, a T-shirt and trousers
- Shirt – buttoned, folded around a board, with the collar towards the flap.
- T-shirt – folded into a rectangle with the size label visible, without pressing the print.
- Trousers – folded lengthways and then in two or three, with the metal parts facing inwards.
Common mistakes when choosing bags
- The bag is exactly the size of the garment – the item creases on insertion and the flap does not close flat.
- Film too thin for jeans and jackets – the metal accessories pierce it on the way.
- A logo right over the size label area – the warehouse cannot see the information without opening.
- Warning text in only one language for goods sold in several markets.
- Different sizes for every style – three or four standard sizes for the whole collection are enough.
What to include in your inquiry
- The items and their folded dimensions.
- The material and the thickness in microns.
- The closure type and flap size.
- The marking texts and languages.
- The logo and Pantone colours.
- Air holes, euro slot or a returns strip.
- The quantity per size.
Poly bags from the manufacturer Polkom
Polkom is a manufacturer of packaging and fashion accessories with its own production in Sofia. We make custom poly bags with logo and markings, and in the packaging section you will also find the boxes, paper and stickers for the same collection. The minimum quantity and samples depend on the article, and production takes 10–20 days after approval. Send the sizes and your logo, preferably as vector PDF, through a request for a quote.
Share this article














