GPSR Clothing Label Requirements – Manufacturer, Address and Contact

Polkom · 4 min read
GPSR Clothing Label Requirements – Manufacturer, Address and Contact

Clothing label requirements no longer stop at fibre composition. Since 13 December 2024, Regulation (EU) 2023/988 on general product safety (GPSR) requires the manufacturer to state on the product its name or trade mark, a postal and an electronic address, and an element identifying the product – type, batch or serial number. Where this is not possible, the details may be given on the packaging or in an accompanying document. For clothing, the most practical solution is usually a sewn-in label.

What GPSR is and why it affects clothing

GPSR replaced the old Directive 2001/95/EC on general product safety. The regulation applies directly in all member states and covers consumer goods for which there is no more specific legislation on the same matters. Clothing falls within its scope: the Textile Regulation 1007/2011 governs fibre names and composition labelling, but not manufacturer details and traceability. GPSR fills that gap.

Important: this article is a practical guide, not legal advice. For specific cases – imports from outside the EU, online sales in several countries, children’s products – check the text of the regulation and the guidance of the national market surveillance authority.

GPSR clothing label requirements: the mandatory details

Manufacturer details

  • Name, registered trade name or registered trade mark.
  • Postal address – a single point of contact.
  • Electronic address – an email or website through which the consumer can contact the manufacturer.

Product identification

Type, batch number, serial number or another element that allows the product to be identified. For clothing this is most often an article number or style code, ideally with a batch or season. The aim is that if there is a problem – for example a button coming off a child’s garment – the manufacturer and the authorities can find exactly the affected pieces.

Importer details

If the product is made outside the EU, the importer also states its name or trade mark, postal and electronic address – on the product or, if that is not possible, on the packaging or in an accompanying document. The importer’s details must not obscure the manufacturer’s details.

Responsible person in the EU

A product placed on the EU market must have an economic operator established in the Union who is responsible for certain safety obligations. For an EU-based brand that manufactures or commissions its own products, this is usually the brand itself.

Where to put the details on the garment

CarrierAdvantagesLimitations
Care and composition labelStays on the garment for its whole life, already carries mandatory informationLimited space; long text needs more pages or a smaller font
Separate printed labelClearly separates GPSR details, easy to change if the address changesOne more label to sew in
Hang tagPlenty of space, can also carry a QR codeRemoved after purchase
Packaging or documentSuitable for very small itemsOnly when labelling the product is not possible

The logic of the regulation is that the details should be on the product itself, with the packaging and document as a fallback. That is why most brands add the manufacturer and address to the care and composition label or use a separate printed label in the inside seam.

Example of label text

A compact block on the care and composition label might look like this:

  • Brand Ltd, 1 Example Street, 1000 Sofia, Bulgaria
  • info@brand.eu
  • Art. 24-117 / batch 09-26

Give a real postal address for correspondence, not just a website – the electronic address does not replace the postal one. If the brand moves office, plan to update the label at the next print run.

Online sales: the details in the listing too

For distance sales, GPSR requires some of the information to be visible in the online listing as well: manufacturer details (and those of the responsible person if the manufacturer is outside the EU), product identification information, and warnings and safety instructions where applicable. The details on the label and in the shop must match. This is a good opportunity to review your product pages together with your labels.

How it fits with other labelling requirements

  • Fibre composition – under Regulation (EU) 1007/2011, using the names listed in the regulation.
  • Care symbols – under ISO 3758; in practice expected by retailers and buyers.
  • Language – consumer information must be in a language easily understood in the country of sale, e.g. Bulgarian for the Bulgarian market.
  • Size and origin – commercially expected, and required in some markets.

Arranging all these elements across the pages of a care label is a design question – it is best to plan the text all at once rather than adding label after label.

Practical tips for label design

GPSR details add two or three lines of text, so allow for them when sizing the label. On a printed care label, the text can go on the back of the composition page or on a separate page of a folded label. Use a font that stays legible after repeated washing, and good contrast between the ink and the tape. If you sell in several countries, the address is not translated, but accompanying words such as “Made by” should be in the relevant languages or avoided. Make a sample and wash it at least several times before approving the run.

Checklist for the brand

  1. Check that every style carries a name or trade mark, a postal and an electronic address.
  2. Introduce an article number and batch that can be traced in your documentation.
  3. For imports, add the importer’s details.
  4. Align the label with your online listings.
  5. Keep technical documentation and records of your component suppliers.

Custom labels from Polkom

Polkom is a Bulgarian manufacturer of labels and accessories for fashion, furniture, footwear and bags, based in Sofia with over 30 years of experience. We produce care and composition, printed, woven labels and hang tags with your logo and text, including the details required by GPSR, with fast sampling and delivery across the EU. Browse all types in the clothing labels category and send your text and logo via the inquiry form.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Is it enough to put only a website on the label?
No. GPSR requires both a postal address and an electronic address for the manufacturer, with the postal address indicating a single point of contact. A website or email covers the electronic part but does not replace the postal address. If label space is limited, use a compact line with the address and email or a separate small printed label.
Can I put the manufacturer details only on the hang tag?
The hang tag is removed after purchase, and the regulation prefers the details to be on the product itself. Packaging or an accompanying document is acceptable only when the size or nature of the product does not allow labelling. Ordinary garments can take a sewn-in label, so the safe solution is a care label or a separate textile label.
What counts as product identification?
The regulation requires a type, batch, serial number or another element that allows the product to be identified. In clothing this is most often an article number or style code combined with a batch or season. It is important that the code can be traced in your documentation, so you can find the affected pieces in case of a complaint or recall.
Does GPSR apply to garments I make to order for companies?
GPSR applies to consumer products made available on the market, including those that may reach consumers. Workwear intended solely for professional use may fall under other rules. If you are unsure about a specific case, check with a legal adviser or your national consumer protection authority before planning your labels.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.