How to Choose a Zip for Trousers, Jeans, Skirts and Dresses

Polkom · 4 min read
How to Choose a Zip for Trousers, Jeans, Skirts and Dresses

A classic trouser zip is a closed-end nylon coil or metal zip, size No. 3–5, with an auto-lock slider and a length of 12–20 cm. Jeans traditionally have a metal zip No. 4–5. For skirts and dresses an invisible zip No. 3 is most often chosen, which cannot be seen once sewn in, and for sportier styles an ordinary nylon coil zip.

Trouser zips: the basic rules

The fly is one of the most stressed places in clothing. The zip here is opened and closed every day, takes strain when sitting and is washed often. That is why the choice comes down to four parameters.

  • Type: always closed-end (closed at the bottom).
  • Slider: always auto-lock (self-locking). With a non-locking slider the zip slips down during movement – a classic cause of complaints.
  • Size: No. 3 for light women's trousers, No. 4–5 for men's trousers, workwear and heavier fabrics.
  • Length: depends on the size and the rise of the waist – approximately 12–20 cm.

Nylon coil or metal zip for trousers?

A nylon coil zip is lighter and more flexible, suitable for suit, linen and viscose trousers, where metal would be stiff and heavy. A metal zip is stronger and has a distinctive look – it is used on work trousers, cargo styles and dense fabrics. Both options work if the size and slider are right.

Zips for jeans

Jeans have their own tradition: a metal zip No. 4 or No. 5, often with brass or antique brass teeth and a cotton or polyester tape in an indigo shade. The zip finish is usually matched with the buttons and rivets of the garment. It is important that the metal is selected for the washing processes (stone wash, enzyme wash) so that it does not stain the fabric. You will find more options in the metal zips category.

On very low-rise jeans the zip is shorter (about 10–12 cm), while on high-waisted styles it can reach 18–20 cm. The alternative is a button fly, but the zip remains the most common choice.

Skirt zips

On skirts the zip is most often in the side seam or in the back seam.

  • Invisible zip No. 3 – for straight, flared and formal skirts. The seam looks continuous.
  • Ordinary nylon coil zip – for everyday, sporty and children's skirts, sewn with a centred or lapped seam.
  • Metal zip – on denim skirts or as a decorative zip at the front.

The length is usually 18–22 cm. For an invisible zip, take one 2–3 cm longer than the opening, because the last centimetres above the stop are not sewn.

Dress zips

Dresses place the highest demands on appearance. A long invisible zip in the back seam or the side seam is used most often.

  • Length: 40–60 cm for the back, 20–25 cm for a side seam.
  • Size: No. 3 for most fabrics; finer for chiffon and silk.
  • Colour: as close as possible to the fabric – with an invisible zip only the puller is visible from the outside.

On designer styles a visible decorative zip – metal or nylon coil with a contrast tape – is also used down the whole back. See invisible zips for the classic option.

Summary table

GarmentZip typeSizeLengthSlider
Women's trousersNylon coil, closed-endNo. 312–18 cmAuto-lock
Men's trousersNylon coil or metalNo. 4–516–20 cmAuto-lock
JeansMetalNo. 4–510–20 cmAuto-lock
SkirtInvisible or nylon coilNo. 318–22 cmStandard
DressInvisibleNo. 340–60 cmStandard, teardrop puller

The values are approximate – the final length is determined by the pattern for each size.

Colour and coordination

On trousers and skirts the zip is usually in the colour of the fabric. In series production the colour is matched to a physical fabric sample or a Pantone number. On jeans the tape colour is often standard indigo or natural, and the accent is on the finish of the teeth. Also think about the other accessories: the waistband button, the eyelets and the labels should be in the same style as the zip.

Costly mistakes

  • A non-locking slider on trousers or jeans.
  • Too large a size on a fine dress – the seam ripples and feels heavy.
  • An invisible zip the same length as the opening – the slider does not reach the end.
  • A metal zip without an industrial wash test – stains on light jeans.
  • One length for all sizes on trousers with a wide size range.

Special cases

Jersey trousers and skirts

In stretch fabrics the zip is a non-elastic element in a stretchy material. The opening must be reinforced with interfacing, and the zip should be as light as possible – nylon coil No. 3. On such styles the zip is often replaced altogether with an elastic waistband.

Children's trousers and dresses

On children's garments the zip should be light, smooth and without sharp edges. Nylon coil zips with a plastic or smooth metal slider are preferred, and the top end of the tape is tucked in so that it does not scratch the skin.

Work trousers

Workwear is washed often at high temperatures. Metal or chunkier nylon coil zips No. 5 with an auto-lock slider and a strong tape that withstands industrial washing are chosen here.

Sample before production

Whatever you choose, test the sample on a real garment: sew it in, wash it according to the label, sit down, and check that the slider moves smoothly and does not slip down. This is the cheapest way to avoid problems in the production run. You will find the full range in the zips category.

Polkom – zips for garment factories and brands

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags, based in Sofia, with over 30 years of experience. We offer zips for trousers, jeans, skirts and dresses in standard and non-standard lengths, in colours matched to a sample, with sampling before the order and delivery across the EU. Send an inquiry with a description of the style.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What zip goes on jeans?
Jeans traditionally have a closed-end metal zip No. 4 or No. 5 with an auto-lock slider. The teeth are most often natural brass, antique brass or nickel colour (nickel free), matched with the buttons and rivets. The length depends on the rise and the size, usually between 10 and 20 cm. It is important that the metal withstands industrial washing.
Why does a trouser zip slide down by itself?
Most often because the slider is not auto-lock or the auto-lock mechanism is worn. An auto-lock slider has a small pin that engages between the teeth when the puller is down and holds the zip. If an ordinary slider has been used, the zip opens with movement. The solution is to replace the slider with an auto-lock one of the same type and size.
Invisible or ordinary zip for a dress?
For formal, evening and classic dresses an invisible zip is chosen – the seam looks continuous and only the small puller is visible from outside. An ordinary nylon coil or metal zip is suitable when you want the zip to be a visible design element, or for sporty and everyday styles. The decision is more stylistic than technical.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.