Contents
For skirts, an invisible zip about 18–22 cm long is used, placed either in the back centre seam or the left side seam. For women's trousers with a side or back invisible zip, the length is similar – usually 18–23 cm depending on the rise. The zip should be 2–3 cm longer than the opening, match the fabric colour, and its top end is concealed inside the waistband or facing.
Invisible Zip for Skirts – Where to Place It
In skirts, the zip's main function is to allow the hips to pass through the waistline without disrupting the silhouette. An invisible zip is the best choice for straight, pencil, flared, and pleated skirts because the seam remains smooth, and only the puller is visible from the outside.
Back Centre Seam
The classic option for pencil skirts and models with a back vent. The zip is positioned at the upper part of the seam, while the vent is at the lower. This placement is convenient for sewing and symmetrical.
Left Side Seam
Preferred for skirts without a back seam, flared styles, or when the back needs to stay clean. Traditionally, the side zip is on the left to allow easy fastening with the right hand.
Invisible Zip and Waistband
For skirts with a sewn-on waistband, the zip ends just below the waistband, which fastens with a button, hook, or wire hook and eye. For skirts with a facing instead of a waistband, the zip reaches almost to the top edge, and the facing covers its end from the inside.
How Long Should the Zip Be for a Skirt
| Style | Position | Approximate Length |
|---|---|---|
| Straight and pencil skirt | Back | 18–20 cm |
| High-waisted skirt | Back or side | 20–23 cm |
| Flared or pleated skirt | Side | 18–20 cm |
| Drop-waist skirt | Side | 15–18 cm |
| Women's trousers | Side or back | 18–23 cm |
The opening should allow the widest part of the hips to pass freely. For non-stretch fabrics, measure from the waist to about 2–3 cm below the hip line. Add 2–3 cm for the bottom end, which is not sewn in with the foot.
Invisible Zip for Trousers
In women's trousers, an invisible zip is an elegant alternative to the classic fly with a flap. It is used in:
- formal trousers with a clean front;
- high-waisted trousers with wide legs;
- leggings and fitted trousers made from dense knitwear;
- trouser sets paired with skirts or jackets, where lines should be minimalist.
An invisible zip is not suitable for jeans or work trousers. These require a metal zip with an auto-lock slider due to the high stress on the fly.
Special Considerations for Trousers
Trousers move more than skirts – when sitting, walking, or bending, the seam around the zip is stressed in all directions. Therefore, for an invisible zip in trousers:
- reinforcing the seam allowances is mandatory, not optional;
- the top end of the zip is securely fixed to the waistband, which fastens with a separate hook or button to absorb tension;
- the bottom end is stitched to the seam allowances with several stitches to prevent pulling when sitting;
- for fitted styles, check during fitting if the opening is sufficient for dressing.
The side invisible zip in trousers must align exactly with the side seam without distorting it; otherwise, the leg twists.
How to Choose Colour and Type
- Colour – as close as possible to the fabric; for patterned fabrics, match the background colour.
- Spiral size – the standard fine invisible zip suits most skirts and trousers. For very heavy wool fabrics, a coarser option can be chosen.
- Puller – standard teardrop shape in tape colour or metal if you want a subtle accent.
Sewing Tips for Invisible Zips in Skirts
- Fuse the seam allowances in the zip area with narrow fusible tape, especially for knits and thin fabrics.
- Sew in the zip before stitching the seam below it and before attaching the waistband.
- Mark the waist and hip levels on both tapes to align them.
- For skirts with vents, insert the zip first, then sew the seam, and finally finish the vent.
- For lined skirts, stitch the lining to the tape by machine a few millimetres from the spiral.
Common Issues
- Bubble at the bottom end – the seam below the zip starts too far from the last stitch.
- Zip visible when sitting – the tape is sewn too far from the spiral, or the colour does not match.
- Waistline misaligned on both sides – missing control marks.
- Zip opens by itself – skirt too tight at the hips; widen the cut or choose a longer zip.
Invisible Zip or Other Types for Skirts
The invisible zip is standard for elegant skirts but not the only option. Denim and cargo-style skirts use metal zips with visible fly, while sports and children's skirts use regular nylon coil zips or elastic waistbands without zips. The choice depends on style, fabric, and stress.
Wholesale Invisible Zips from Polkom
Polkom manufactures and delivers invisible zips for skirts, trousers, and dresses in standard lengths and a wide range of colours, with shade matching to fabric samples. Send a request with lengths, colours, and quantities – we will offer suitable zips and samples.
Share this article














