Metal Sew-On Snap Fasteners – Materials, Finishes and Uses

Polkom · 4 min read
Metal Sew-On Snap Fasteners – Materials, Finishes and Uses

Metal sew-on snap fasteners are snapping closures made of brass or steel with a finish – most often nickel colour, black, gold or bronze. They are thin, strong and snap shut with a clear click, which is why they are used on coats, jackets, dresses in dense fabrics and wherever the fastening takes strain. Brass styles do not rust and are better suited to garments that are washed often.

Metal sew-on snap fasteners: what they are made of

Brass

Brass is an alloy of copper and zinc. It does not rust, withstands washing well and allows thin, precise details. Metal sew-on snaps in brass are the higher-quality choice for garments that are washed regularly or worn close to the body.

Steel

Steel sew-on snaps are strong and more economical. The finish protects them from corrosion, but if scratched or exposed to prolonged moisture they can leave rust marks on the fabric. They are suitable for items that are not washed often – coats, jackets, stage costumes – or that are dry-cleaned.

Finishes and colours

FinishLookSuitable for
Nickel colour (silver-toned, nickel free)Neutral, lightLight and medium fabric tones
BlackAlmost invisible on dark fabricsBlack, navy, dark grey garments
Gold, brassWarm toneBeige, brown and warm tones
Bronze, antiqueMuted, vintageWool coats, classic styles

The aim is usually for the snap to blend into the fabric. That is why a black finish is chosen for dark garments, and nickel colour or white plastic for light ones. If even the metal tone is unwanted, on coats the large snap can be covered with fabric.

Advantages of metal sew-on snap fasteners

  • Strength – stronger hold and less risk of breaking.
  • Slim profile – at the same strength, a metal snap is flatter than a plastic one.
  • Clear click – you can tell when the garment is fastened.
  • Ironing resistance – the metal does not deform at iron temperatures.
  • Wide size range – from small ones for blouses to large ones for coats.

Disadvantages and how to avoid them

Rust

Steel snaps with a damaged finish can leave stains. Choose brass for garments that are washed, and do not leave wet items in the drum for long.

Nickel and sensitive skin

Nickel can cause a reaction in people who are sensitive to it, which is why the EU REACH regulation restricts nickel release from items in prolonged contact with the skin. All Polkom metal finishes are nickel free – the nickel colour, the black and the gold alike – so they are also suitable for lingerie, baby and children's clothing. Plastic sew-on snaps are an alternative.

Weight and visibility

On very thin and sheer fabrics, a metal snap may show through or pull the fabric. Clear plastic styles are a better fit there.

Where metal sew-on snap fasteners are used

  • coats and jackets – inner fastening of double-breasted styles, lapels, collars;
  • dresses and skirts in dense fabrics – necklines, slits, concealed plackets;
  • uniforms and stage costumes – fast and reliable fastening;
  • leather and wool items – where plastic is not strong enough;
  • accessories – cases, fabric bags, scarves.

Metal sew-on snap fasteners for coats

Coats are the typical application for large metal sew-on snaps. They hold the overlap of double-breasted styles and the inner lapels without being seen. For a luxurious look the snap is covered with fabric in the colour of the lining or the outer fabric – similar to fabric-covered buttons. This way no metal is visible when the coat is open.

Sewing and reinforcement

Metal sew-on snaps are sewn on just like plastic ones – the male part on top, the female part underneath. Because of the stronger hold, the load on the fabric is greater, so use strong thread and more stitches through each hole. On thin and medium fabrics, reinforce the spot with interfacing. For large coat snaps, sew with doubled thread or a buttonhole (loop) stitch.

Washing and care

  • Close the snaps before washing so that they do not catch on other garments.
  • Wash at the temperature stated on the garment's care label.
  • Do not leave wet items standing – especially with steel snaps.
  • Iron on the reverse side without pressing the iron onto the snap.

How to choose the size of a metal sew-on snap

The size is determined by the fabric and the load. For blouses and dresses in thin and medium fabrics, small and medium styles that do not make the fabric bulge are suitable. For coats, jackets and dense wool fabrics, large styles with a stronger hold are chosen. If you are unsure between two sizes, sew both onto a sample of the actual fabric and check how much effort it takes to unfasten and whether the snap can be felt when worn.

Metal snaps or decorative buttons

If the fastening should be visible and part of the design, metal buttons with a buttonhole or press-on snap buttons are the better choice. Sew-on snap fasteners are for concealed fastening.

Metal sew-on snap fasteners in serial production

In production runs it is important that all snaps in the batch have the same snapping force and the same finish tone. Compare the delivery with the approved sample and keep the male and female parts separate. If the garments will be washed industrially or dry-cleaned, test a sample with the snaps using the same process.

Ordering metal sew-on snap fasteners

In the sew-on snap fasteners category you will find metal styles in black, nickel colour (nickel free) and gold in various sizes. Polkom is a manufacturer with over 30 years of experience, large stock and delivery across the EU. Send an inquiry with the size, finish and quantity via the contact page.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Do metal sew-on snap fasteners rust?
Brass ones do not rust. Steel ones are protected by a finish, but if scratched or exposed to prolonged moisture they can leave rust marks. So for garments that are washed often, choose brass styles, close the snaps before washing and do not leave wet items standing in the drum for long.
Should I choose black or nickel-colour sew-on snaps?
Choose the colour that blends into the fabric. Black snaps are almost invisible on dark fabrics – black, navy, dark grey. Nickel-colour (nickel free) snaps are better for light and medium tones. For very light and sheer fabrics, white or clear plastic styles that do not show through work better.
Are metal sew-on snap fasteners suitable for baby clothes?
For baby and children's clothing, plastic sew-on snaps are more often preferred – they are lighter, do not rust and are metal-free. Polkom's metal sew-on snaps are nickel free and are also suitable – sew them on very securely. Whatever the material, check the strength of the attachment, because small parts must not come off.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.