Mother-of-Pearl Buttons for Shirts – Sizes for Front, Collar and Cuff

Polkom · 4 min read
Mother-of-Pearl Buttons for Shirts – Sizes for Front, Collar and Cuff

The standard mother-of-pearl button size for men's shirt fronts is 18L (about 11.5 mm), and for women's blouses 16L (about 10 mm). Smaller buttons, 14L–16L, are typically used for collars with buttons, collar stands, cuffs and pockets. A classic men's shirt requires between 10 and 14 buttons depending on the design.

How button sizes are measured: lignes and millimetres

In the garment industry, button diameter is measured in lignes (L, from the German Linie). One ligne equals 0.635 mm, and 40L is approximately one inch (25.4 mm). Therefore, shirt specifications usually list 16L or 18L rather than “10 mm”. When ordering, it is recommended to specify both values, especially when working with different manufacturers.

Mother-of-pearl button sizes for shirts by position

PositionMen's ShirtWomen's Blouse
Front (placket)18L ≈ 11.5 mm16L ≈ 10 mm
Collar stand16L–18L14L–16L
Button-down collar tips14L ≈ 9 mm14L
Cuff16L–18L14L–16L
Sleeve placket (gauntlet)14L12L–14L
Pocket16L–18L14L–16L
Spare buttonsone of each sizeone of each size

This table reflects widely accepted practice but is not a strict rule. Italian-style shirts sometimes use larger, thicker 20L buttons, while summer linen shirts often have smaller buttons for a lighter look.

How many mother-of-pearl buttons does a shirt need?

The number depends on the model. For order planning, you can calculate as follows:

  • Front – 6 to 8 buttons depending on length and spacing (usually 8–10 cm between buttons);
  • Collar stand – 1 button;
  • Button-down collar – 2 small buttons, sometimes one at the back;
  • Cuffs – 1 or 2 buttons per cuff (2 for adjustable cuffs);
  • Sleeve plackets – 1 button;
  • Pockets – 1 button per flap pocket;
  • Spares – 1–2 buttons sewn on the seam or kept in a bag.

Example: a men's shirt with 7 front buttons, button-down collar, double cuffs and spares requires about 7 buttons in 18L and 7–9 buttons in 14L–16L. Add a technological reserve for sewing defects, usually a few percent.

Thickness, profile and holes

Thickness

Mother-of-pearl for shirts is valued when solid – a button about 2–3 mm thick at 18L looks substantial and resists breakage. However, too thick a button may not pass easily through the buttonhole of thin poplin. For very fine fabrics, choose a thinner button or enlarge the buttonhole by 1–2 mm.

Profile

  • Flat – universal, discreet, suitable for business shirts;
  • Concave centre – holes sit in a “well”, protecting the thread from wear and giving a more crafted look;
  • Rimmed edge – more pronounced silhouette, often used for linen and oxford shirts.

Two or four holes

Four holes are standard for classic shirts – the button sits more securely and does not tilt. Two holes give a cleaner look and are common for women's blouses and summer styles. The hole spacing should match your production sewing machine.

Mother-of-pearl colour matching the fabric

White mother-of-pearl is classic for white, light blue and pastel shirts. Cream trochus suits linen and ecru fabrics, while dark mother-of-pearl complements black, dark blue and burgundy shirts, especially evening wear. For striped and checked fabrics, choose a shade matching the lighter colour in the pattern. If the collection includes jackets or trousers, match the buttons with other men's buttons.

Special cases: tuxedo, children’s and linen shirts

Tuxedo shirt. The front is often hidden under a placket, with only collar stand and cuff buttons visible, or decorative stud buttons are used. Hidden buttons can be thinner and smaller, for example 14L–16L, since they are not visible, while visible buttons are chosen with stronger shine – white or dark mother-of-pearl depending on the jacket.

Children’s shirt. Proportions are smaller, so the front is usually 14L–16L. It is important that the button is sewn securely with thread shank and has no sharp edges.

Linen or summer shirt. Linen is a coarser, thicker fabric. Denser buttons with a matte or natural mother-of-pearl look are suitable, sometimes with two holes to emphasize the casual character. For “cubinka” collar shirts, buttons are used only on the front.

Buttonhole and thread

The buttonhole length is usually the button diameter plus its thickness and a small allowance. For an 18L (11.5 mm) button with 2.5 mm thickness, this is about 15 mm. Make a test buttonhole on a fabric sample before programming the machine. Use strong polyester or cotton thread matching the fabric – see sewing threads.

Common mistakes when choosing shirt buttons

  • Choosing size based only on photos without a fabric sample;
  • Using the same size for front and button-down collar tips – small collar tips look crowded;
  • Omitting spare buttons in the specification;
  • Mixing batches with different shades in the same shirt.

Browse the models in the mother-of-pearl buttons category – available in standard shirt sizes.

Ordering from Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags. We supply mother-of-pearl buttons in shirt sizes from stock, produce samples and engrave logos on request. Send us your shirt specification and quantities via the contact page – we will offer you the suitable model.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What button sizes are used for men's shirts?
For men's shirt fronts, 18L buttons (about 11.5 mm) are most common. Smaller 14L buttons are used for button-down collar tips and sleeve plackets. Cuffs and collar stands are usually 16L–18L. Some brands use 20L for a more substantial look, especially on thicker fabrics like oxford and denim.
How many buttons does a shirt have?
A classic men's shirt has between 10 and 14 buttons. The front has 6–8, the collar stand one, cuffs one or two, sleeve plackets one, and button-down collars two small buttons. Spare buttons and pocket buttons are added if there are flaps.
Is 16L or 18L better for a women's blouse?
For most women's blouses in fine fabrics, 16L (about 10 mm) looks more delicate and proportional. 18L suits blouses with a men's cut, oversized styles or thicker fabrics. The safest way is to sew one button of each size on a fabric sample and compare visually.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.