Nylon Coil Zip Sliders – Types, Sizes and How to Choose

Polkom · 4 min read
Nylon Coil Zip Sliders – Types, Sizes and How to Choose

A nylon coil zip slider is the moving part that engages and separates the two coils. Its choice depends on three things: the coil size, the chain type (standard or reverse coil) and the function – whether the zip should lock by itself, open from both sides or be pulled from inside and outside. A slider that does not match on any of these conditions will not work reliably.

How a nylon coil zip slider is built

The slider has a body with a Y-shaped channel: the wide end with two channels separated by a wedge, and the narrow end with one common channel. When the slider moves towards its wide end, the two coils enter separately and come out engaged – the zip closes. In the opposite direction, the wedge separates them. The puller is mounted on top of the body, and on locking models there is also a pin mechanism.

  • Body – most often zinc alloy, less often plastic (POM) or steel.
  • Puller – metal, plastic, rubberised or cord; fixed or interchangeable.
  • Locking mechanism – a spring and pin that block the coil when the puller is lowered.
  • Finish – paint in the zip colour, nickel colour (nickel free), antique brass, black oxide and others.

Types of nylon coil zip sliders

TypeHow it worksTypical use
Auto-lockA pin blocks the coil as soon as the puller lies downTrousers, skirts, children’s clothing, jackets
Semi-auto lockLocks when the puller lies down, but with less resistanceSweatshirts, sportswear
Non-lockingMoves freely in both directionsBags, cases, cushions, tents
PadlockableTwo pullers with holes that come togetherLuggage, suitcases
Double-pull (two-sided)A puller on both sides of the zipReversible garments, tents, sleeping bags
Invisible zip sliderSmall “teardrop” pullerInvisible zips on dresses and skirts
For reverse coilProfile for a coil on the insideWater-resistant and outdoor zips

Auto-lock – when it is essential

On trousers, skirts and all vertical openings that are pulled under movement, the slider must lock – otherwise the zip gradually opens by itself. On horizontal openings of bags and cases, locking is not needed and only makes quick opening harder.

Double-pull slider

On tents, sleeping bags and reversible jackets, the zip must also open from the inside. A double-pull slider has a puller on both sides and solves this problem without compromising the look.

How to choose a nylon coil zip slider

  1. Size. It must match the coil size exactly – a No. 5 slider for a No. 5 coil.
  2. Chain type. Standard or reverse coil; sliders for nylon coil, moulded and metal zips are not interchangeable.
  3. Source. With continuous zip by the metre, it is safest for the sliders to come from the same source as the chain.
  4. Function. Locking, non-locking, double-pull, padlockable.
  5. Puller. Size, shape, ease of use with gloves, space for a logo.
  6. Finish and colour. Matching the zip or the product’s metal accessories – eyelets, buckles, aglets.

Pullers and branding

The puller is the most visible part of the zip and is therefore a convenient place for the brand. The options include a metal puller with an embossed or engraved logo, a rubberised puller in the collection colour and a cord puller with an aglet. On sliders with an interchangeable puller, decorative elements are attached separately – see the zip pullers. For cord pullers, aglets are also suitable.

When choosing a puller, think about ergonomics: a small puller looks elegant but is impractical on tents and winter jackets, where people pull the zip with gloves on.

Metal or plastic slider

Zinc alloy metal sliders are standard in clothing: they are strong, allow a locking mechanism, take various finishes and a logo on the puller. Plastic sliders are lighter, do not corrode and do not leave stains on contact with salt water or sweat, which is why they are found on beach bags, water sports gear and some tents. However, they rarely have a lock and offer fewer decoration options. For products that are washed often and at high temperatures, a metal slider with a quality finish is usually the safer choice. For contact with sea water, choose a corrosion-resistant finish or plastic.

When the slider needs replacing

Most problems with nylon coil zips come from the slider, not the coil. Signs of a worn slider:

  • the zip closes but immediately splits open behind the slider;
  • the slider moves loosely or tilts;
  • the lock no longer holds;
  • the puller is broken or bent.

Squeezing the slider with pliers can help temporarily, but it deforms the body and often damages the coil. It is more reliable to replace the slider with a new one of the same size and type.

Common ordering mistakes

  • Ordering by size only, without stating the chain type.
  • A non-locking slider for trousers or a skirt.
  • A standard slider for a reverse coil.
  • A puller wider than the tape, which catches the fabric or gets in the way of the pocket.
  • A different finish on the slider and the other metal accessories in the collection.

Sliders and nylon coil zips from Polkom

Polkom is a manufacturer of accessories for fashion, furniture, footwear and bags from Sofia. We supply nylon coil zips together with compatible sliders, including custom sliders and pullers with a logo, and send samples before the production run. The price depends on the slider type, finish, puller and quantity. Send a request for a quote with the zip size, the chain type and the function you need.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

How can I tell whether a slider has auto-lock?
Lower the puller so that it lies flat on the zip and try to move the slider by pulling the tape. If it does not move, the slider is locking. Underneath the body you can usually see a small pin that enters between the coils. Non-locking sliders move freely regardless of the puller’s position.
Can a logo be put on the slider?
Yes. The logo is most often placed on the puller – embossed, engraved, with enamel or on a rubberised puller. On sliders with an interchangeable puller, separate zip pullers with a logo are also used. Options and price depend on the shape, material and quantity, so send an inquiry with your logo file.
Why does the new slider not close the zip?
Most likely it does not match in size, chain type or the profile of the specific make. A slider for a reverse coil does not work on a standard one and vice versa. It is also possible that the slider has been fitted the wrong way round. Check the number on its back and, if necessary, send a sample of the zip so that we can find a compatible model.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.