Contents
A reverse coil zip is a nylon coil zip in which the coil sits on the inner side of the tape, so that from the front only a smooth tape with a narrow line in the middle is visible. Reverse coil zips are used on sports and outdoor jackets, water-resistant zips and minimalist designs, where the zip needs to look flat and clean.
What a reverse coil zip is and how it differs from a standard one
On a standard nylon coil zip the coil is visible on the front and the slider runs over it. On a reverse coil zip the construction is the same, but the tape is “turned over” – the coil faces the lining, and the face of the zip is a smooth textile surface. The slider has a different profile to grip the chain from the other side.
| Feature | Standard coil | Reverse coil |
|---|---|---|
| Coil | Visible on the front | On the back, facing the lining |
| Zip face | Coil and tape | Smooth tape |
| Slider | Standard | Special, for reverse coil |
| PU coating possible | Limited | Yes, often laminated |
| Look | Classic | Modern, technical |
A reverse coil zip should not be confused with an invisible zip. On an invisible zip the tape folds over and the seam completely hides the chain, so the zip looks like an ordinary seam on a dress or skirt. On a reverse coil zip the tape remains visible on the front – it is flat and smooth, but it is clear that there is a zip there.
Where reverse coil zips are used
- Softshell and hardshell jackets – the smooth face of the zip is the basis for a water-repellent or waterproof coating.
- Sportswear – sweatshirts, windbreakers, leggings and tops with a minimalist design.
- Pockets – vertical and horizontal pockets on jackets and trousers where the zip needs to be flat.
- Backpacks and technical bags – especially with coated materials, where a visible coil would spoil the look.
- Fashion collections – when the zip is part of a “clean” design and should not draw attention.
Reverse coil zips and water resistance
The most common reason to choose a reverse coil zip is the possibility of coating the tape with polyurethane (PU) or laminating it with a film. Since the coil is at the back, the face of the zip is a flat surface and the coating lies smoothly. The two coated tapes press tightly together when closed and keep out much of the water.
It is important to know that a reverse coil zip is not water-resistant in itself – the water resistance comes from the tape coating. An uncoated reverse coil zip lets water through like any textile zip. So when ordering, specify whether you need only a reverse coil (for the look) or a reverse coil with a coating (for protection).
Sliders for reverse coil zips
Sliders for reverse coil have a differently shaped channel and are not interchangeable with standard ones. Here is what to keep in mind:
- the slider must be of the same number and specifically for reverse coil;
- on sports jackets, auto-lock sliders with a large puller that is easy to use with gloves are often chosen;
- on coated zips the slider has a narrow profile so as not to damage the coating;
- double-sided sliders are convenient on tents and reversible products.
For reverse coil continuous zip chain by the metre, order the sliders together with the chain – this is the surest way to avoid incompatibility.
How to sew a reverse coil zip
- Check the orientation. The smooth side of the tape is the face; the coil faces the lining.
- Choose a suitable needle. On coated tapes a sharp needle with a longer stitch length is used so the coating is not perforated too densely.
- Do not use pins in the coated area. The holes remain visible. Temporary tape or clips are better.
- Leave a small distance from the coil. If the seam is too close, the slider will catch the fabric.
- Consider a zip garage. At the top end the slider tucks into a small fabric pocket, which gives extra protection from water and from rubbing against the chin.
Colour, look and branding
Because only the tape is visible from the front, a reverse coil zip is very well suited to colour accents and to zips matched to the fabric. The tape and the coil can be in one colour or contrasting – for example a black tape with a coloured coil that is only visible when opened. On coated versions the surface has a slight gloss or a matte effect depending on the type of coating, so the colour should be approved on a physical sample rather than just on screen. The slider puller is the main place for a logo – rubberised, metal or cord.
When a reverse coil zip is not suitable
- With a classic design in which the visible coil is part of the look.
- On dresses and skirts where the zip must disappear completely – then choose an invisible zip.
- On very heavy products and luggage, where a larger standard coil or a moulded zip is more suitable.
- When the budget is limited and no coating is needed – a standard coil zip is the simpler option.
What to state in your inquiry
- coil number;
- type – closed-end, open-end, two-way, by the metre;
- with or without coating, and what type of coating you need;
- length and tape colour;
- type of slider and puller, including a logo puller.
Reverse coil zips from Polkom
Polkom is a Sofia-based manufacturer of accessories for fashion, furniture, footwear and bags with over 30 years of experience. We help brands and sewing factories choose a suitable reverse coil zip, sliders and logo pullers, and send samples before the run. The availability of specific versions depends on the number, colour and coating, so send a request for a quote with a description of the product.
Share this article














