Contents
The spiral zipper features a continuous coil made from polyester or polyamide monofilament sewn or woven onto the edge of a textile tape, rather than individual teeth. Spiral zippers are chosen when a lightweight, flexible, and quiet zipper is needed that follows the shape of the product – ideal for dresses, trousers, sweatshirts, bags, and home textiles.
What is a spiral zipper and how is it constructed
Every zipper consists of three main parts: tape, chain, and slider. In a spiral zipper, the chain is formed by winding a plastic filament into a spiral around an inner cord, which is then attached to the tape. The two spirals interlock when the slider presses them together and separate when it moves in the opposite direction.
- Tape – usually polyester; it is sewn to the fabric and determines how the zipper behaves in the seam.
- Spiral – a monofilament, most often polyester, less commonly polyamide (nylon). This is why spiral zippers are often called “nylon zippers” in everyday language.
- Slider – made of metal (zinc alloy) or plastic, with or without an automatic lock.
- Stops – top and bottom stops prevent the slider from coming off the chain; for separating zippers, there is a pin and box at the bottom.
Because the spiral is uniform along the entire length, the zipper can be cut to any size. Therefore, spiral zippers are available both as spiral zippers by the meter and in ready lengths – the same product in two forms.
Main advantages
- Flexibility. The spiral bends in a small radius, making it suitable for rounded openings on bags, pouches, and cases.
- Lightweight. It does not weigh down lightweight fabrics or pull the seam down.
- Quiet and smooth operation. The slider moves evenly without rattling.
- Colour matching. The spiral and tape are dyed together, allowing the zipper to closely match the fabric.
- Concealment option. Invisible zippers are also spiral zippers, with the coil turned to the inside.
- Easy cutting to size. Suitable for mass production with many different lengths.
Spiral zipper vs moulded and metal zippers
The most common question when choosing a zipper is whether to use spiral, moulded (plastic teeth), or metal zippers. The answer depends on the load, fabric type, and desired look.
| Criterion | Spiral | Moulded | Metal |
|---|---|---|---|
| Flexibility | High | Medium | Low |
| Weight | Lightest | Light | Heaviest |
| Resistance to lateral stress | Good | Very good | Very good |
| Suitable for curved seams | Yes | Limited | No |
| Cutting by the meter | Easy | Possible | Possible but more laborious |
| Typical use | Dresses, trousers, bags, cushions, sweatshirts | Jackets, backpacks, outdoor gear | Jeans, leather jackets, workwear |
If the product will be used outdoors, in cold conditions, or under heavy load, consider moulded zippers. For a classic look with jeans and leather, metal zippers are more suitable.
Types of spiral zippers
By construction
- Closed-end – bottom stop closed; for trousers, skirts, pockets, cushions.
- Separating – fully separable; for sweatshirts, cardigans, and light jackets.
- Two-way – with two sliders; for long jackets, sleeping bags, luggage.
- Invisible – coil is on the back and not visible from the front; for dresses and skirts.
- Reverse coil – coil is on the inside, smooth tape visible on the front; often used for waterproof zippers.
By size
The size is indicated by a number – No. 3, No. 5, No. 8, No. 10 – which roughly corresponds to the width of the closed coil in millimeters. A larger number means a stronger chain and a bigger slider. No. 3 is for fine garments, No. 5 is a universal size, and No. 8 and No. 10 are for heavy-duty products, tents, and luggage.
When a spiral zipper is not the best choice
The spiral coil is strong, but there are situations where another zipper type performs better:
- with very thick fabrics and leather where a rigid, solid chain is needed;
- for workwear exposed to abrasive surfaces;
- when the design requires visible metal teeth as a feature;
- for products that close under heavy pressure, such as fully packed backpacks or suitcases – there a larger size or moulded zipper offers more durability.
How to extend the life of a spiral zipper
Most complaints about “broken zippers” are actually slider problems, not the coil. Over time, the slider’s jaws spread apart and no longer press the two spirals tightly enough – the zipper closes but immediately opens behind the slider. For mass production, it is worth choosing a quality metal slider and a size with a safety margin for the load. For the end user, simple rules apply: close the zipper before washing, avoid pulling sharply when fabric is caught, and do not iron the coil at high temperatures.
What to specify when ordering
- Coil size (No. 3, No. 5, No. 8, etc.).
- Construction – closed-end, separating, two-way, invisible, or reverse coil.
- Length in centimeters or order by the meter with separate sliders.
- Colour of tape and coil – by fabric swatch or colour reference.
- Type of slider and puller – standard, decorative, or with logo.
- Special requirements – high-temperature washing, water-repellent coating, zipper brand.
If your specification explicitly requires a brand, check out YKK spiral zippers – Polkom supplies original YKK zippers.
Spiral zippers from Polkom
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear, and bags, based in Sofia with over 30 years of experience. We offer spiral zippers in various sizes, lengths, and colours, sliders with custom logos, fast samples, and delivery across the EU. Send us a request for quote with your product specifications – we will propose the right zipper and provide a sample before production.
Share this article














