Thread Storage – How to Preserve Strength and Colour

Polkom · 3 min read
Thread Storage – How to Preserve Strength and Colour

Proper thread storage means a dark or shaded, cool, and dry place with moderate humidity and protection from dust. Cones are kept in closed boxes or their original packaging, away from windows, radiators, and chemicals. This preserves the thread’s strength, colour, and smooth feeding, ensuring machines run without breakages.

Why thread storage matters

Thread is a thin, highly stretched fibre with a large surface area relative to its volume. Any change—fading, drying out, contamination—directly affects the seam. Poorly stored thread breaks more often, sheds lint, loses shine, and may discolor unevenly. In a sewing workshop, this means production stops, rework, and complaints.

Main enemies of thread

Light

UV rays degrade fibres and dyes. Cones left on shelves by windows fade on the surface within weeks, and the outer layers lose strength. Cotton, viscose, and polyamide are more sensitive than polyester, but no thread is fully immune.

Heat and dryness

High temperature and very dry air dry out natural fibres and the lubricant applied during thread production. Dried-out thread becomes brittle, friction in the needle increases, and it breaks. Do not store threads near radiators, heating pipes, dryers, or in attics that heat up in summer.

Humidity

Excessive moisture causes mould and unpleasant odours in cotton threads and deforms cardboard spools. Damp thread can stain light fabrics.

Dust and lint

Dust settles on thread and transfers to machines and seams. On light-coloured threads, contamination is visible; for all threads, dust increases friction.

Recommended thread storage conditions

FactorRecommendation
LightNo direct sunlight; closed cabinets or boxes
TemperatureRoom temperature, no sudden changes; away from heating
HumidityModerate – about 50–65% relative humidity
DustOriginal packaging, boxes with lids, or plastic bags
ChemicalsSeparate from solvents, dyes, and cleaning agents

Warehouse organisation

  • By colour cards and numbers – cones arranged in the same order as the manufacturer’s catalogue ease inventory management.
  • By type and thickness – separate zones for sewing, overlock, embroidery, and technical threads.
  • Upright – cones stand on their base, not on the edge, to avoid deformation of the winding.
  • Label outwards – article, colour, and batch are visible without removal.
  • No stacking – heavy boxes on top crush cones below.

Rotation: first in, first out

The FIFO principle is the simplest way to prevent thread ageing in storage. New deliveries go to the back; older stock is used first. Mark the receipt date on the box. Pay special attention to rarely used colours, as they remain longest on shelves.

Dye lots

Threads are dyed in batches, which may have slight shade differences. Keep batches separate in storage and do not mix cones from different batches in the same model if the seam is visible. The batch number is printed on the cone label—record it in the work card.

Storage in the sewing workshop

Machine cones also need care. During long breaks—holidays, model changes—remove and store them. Cover machines at shift end to prevent dust accumulation. Do not leave half-empty cones on window sills or pile them in open boxes near worktables.

How to recognise aged thread

  • The surface layer is lighter than inner layers;
  • The thread breaks easily when pulled by hand;
  • It sheds more lint and dust when unwound;
  • It has an unpleasant smell or stains;
  • The cardboard spool is deformed, and the winding is loose.

If you notice these signs, do not use the thread for structural seams. Sometimes it is enough to unwind and discard the first few metres of faded thread.

Special threads

Metallic embroidery threads must be kept dry to prevent darkening of the metallic foil. Water-soluble threads are stored in airtight bags because they absorb moisture from the air. Elastic threads with rubber cores age faster and should be used within a reasonable period. Cotton threads are most sensitive to moisture and mould.

Inventory planning

The best way to avoid thread ageing is not to keep excess stock. Plan orders according to the production schedule and keep a buffer for the most used colours. Order rare colours closer to sewing time.

Thread storage checklist

  • Closed cabinets or boxes, no direct light;
  • Stable room temperature and moderate humidity;
  • Organised by type, thickness, and colour number;
  • Marked receipt date and batch number;
  • Rotation by first in, first out principle;
  • Regular checks of rarely used colours;
  • Separate storage for metallic, water-soluble, and elastic threads.

Spend a few minutes once a month to inspect the warehouse. This way, you will detect faded or damaged cones in time and plan your next order based on actual stock.

Wholesale threads from Polkom

Polkom delivers to sewing workshops and brands across Europe with threads from large stock, allowing you to order more frequently and in smaller quantities without overstocking. Send us your seasonal plan via the contact page—we will help you plan colours and quantities.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

How long can thread be stored?
There is no exact expiry because it depends on the fibre and conditions. Polyester thread stored in a dark, cool, and dry place retains its properties for years. Cotton, viscose, and elastic threads age faster. Instead of relying on expiry dates, apply the first in, first out principle and check the strength of old cones before use.
Can threads be stored in a refrigerator?
It is neither necessary nor recommended. Threads need stable room temperature and moderate humidity. Refrigerators have high humidity, and condensation forms on cones when removed, which can damage natural fibres. A closed cabinet or box in the shade, away from heating, is sufficient.
Why is the outer layer of the cone lighter?
This is fading caused by light. UV rays degrade dyes on the cone’s surface, while inner layers remain protected. Such thread will produce seams with uneven shades. Unwind and discard the faded layers, and in future store cones in closed boxes or cabinets.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.