Contents
Plastic buttons for clothing are not just one material, but several different polymers: polyester, ABS, nylon (polyamide), acrylic and urea. The most common in apparel are polyester buttons due to their colour range and effects, ABS is used for metallised designs, nylon for durable sports and workwear, and urea when heat resistance is required. The choice depends on the garment, its treatment and care.
Why “plastic buttons” is too general a term
When a garment factory orders “plastic buttons”, the manufacturer will almost always ask: what material, which effect and for what fabric. Different plastics behave differently during washing, ironing, dyeing and wear. A button that looks perfect on a sample may lose its shine after industrial ironing or yellow after bleaching. That is why it is useful to know the main types and their limits.
Main types of plastic buttons
Polyester buttons
They are cast from polyester resin and then machined on a lathe. They allow the widest choice of colours and effects – mother-of-pearl shine, imitation horn and marble, multicoloured veins, matte and gloss. They are lightweight, dyed to match the fabric exactly and suitable for shirts, blouses, trousers, coats and children’s clothing. Limitation: they do not tolerate direct contact with very hot irons. More models are available in the polyester buttons category.
ABS buttons
ABS is a thermoplastic injected into a mould. Its main advantage is that it metallises well – galvanic coating gives the button a gold, silver, nickel colour (nickel free) or antique look. That is why many “metal-look” buttons for blouses and dresses are actually ABS with plating. They are much lighter than real metal, but the coating can wear off with aggressive washing.
Nylon (polyamide) buttons
Nylon is tough and flexible, hard to break and withstands repeated washing. It is injection moulded, so suitable for buttons with embossed designs, logos in the mould and complex profiles. Used for workwear, sportswear and children’s clothing. Nylon can be dyed together with the finished garment, which is an advantage in garment dye processes.
Acrylic buttons
Acrylic (PMMA) is transparent and very shiny. It is used to make crystal-clear, transparent and coloured-transparent buttons for women’s fashion and evening wear. It is more brittle than nylon, so not the best choice for heavily used garments.
Urea buttons
Urea is a thermosetting resin that becomes hard and heat resistant after pressing. Urea buttons tolerate high-temperature ironing and dry cleaning, have a solid matte appearance and are used for workwear, uniforms and garments that go through pressing. See urea buttons.
Comparison table
| Material | Technology | Strength | Care considerations | Suitable for |
|---|---|---|---|---|
| Polyester | Casting and machining | Colours, effects, imitations | Very hot iron | Shirts, blouses, coats, children’s wear |
| ABS | Injection moulding | Metallised coatings | Coating abrasion | Blouses, dresses, decorative models |
| Nylon | Injection moulding | Toughness, garment dyeing | Limited shine | Workwear, sportswear |
| Acrylic | Injection moulding or cutting | Transparency, shine | Impact and stress | Women’s and evening fashion |
| Urea | Pressing | Heat resistance | Narrower effect range | Uniforms, press garments |
How to choose the material
Start from the conditions the garment will face, not just the look. A good sequence is:
- Garment treatment. If the garment will be washed with pumice, bleached or dyed after sewing, test the button in the same process or choose nylon.
- Ironing. For industrial high-temperature ironing, prefer urea or test the polyester button first.
- Wear and stress. Outerwear, workwear and children’s clothes require thicker and tougher buttons.
- Appearance. For mother-of-pearl shine and natural material imitation – polyester; for metal look without weight – ABS; for transparency – acrylic.
- Budget and series size. Injection-moulded models require a mould, which makes sense for larger series; lathed polyester buttons allow flexibility for smaller batches.
Common mistakes in selection
- Choosing only by photo, without a sample on the actual fabric.
- Using ABS plated buttons on garments that will be industrially washed with abrasives.
- Too thin buttons for thick wool – they bend and holes tear.
- Skipping ironing tests for shirts that go through pressing.
- Using different manufacturers for the same button model in one collection – leads to tone differences.
Plastic buttons or snap buttons?
Sometimes “plastic buttons” means plastic snap buttons – two-part fasteners fixed with a press or pliers, no sewing needed. They are a separate category mainly used for baby clothes, raincoats and bags. If you need this type of fastening, see snap buttons.
How to test plastic buttons before production
A simple test saves costly complaints. Sew several buttons onto a piece of the actual fabric and run them through the same washing, ironing and drying processes the finished garment will undergo. Then check if the colour and shine changed, if there are cracks around the holes and if the coating (for ABS) remained intact. For garments dyed after sewing, also test dye uptake – some materials absorb dye, others keep their original colour.
Plastic buttons from Polkom
Polkom is a manufacturer of plastic buttons for clothing – polyester models from stock and custom colours matching your fabric, with logo and custom profiles, as well as other materials according to your collection needs. We assist in material selection based on garment treatment and produce samples quickly. We deliver across the EU. Send us a request with a photo, size and quantity; minimum order quantities depend on the article.
Share this article














