Contents
Woven elastic is an elastic tape woven on a loom: lengthwise elastic threads are interlaced with a crosswise thread of polyester, polyamide or cotton. The result is a dense, stable tape that keeps its width when stretched and does not roll. It is used mainly in waistbands, belts, workwear and products where the elastic carries a constant load.
How woven elastic is produced
Narrow tapes, including elastics, are woven on special narrow-fabric looms (needle or shuttle looms). Two groups of threads run along the length of the tape: elastic threads (natural rubber or elastane, usually covered with polyester or cotton) and non-elastic warp threads that form the surface. The weft thread runs across and “locks” the construction.
Because every lengthwise thread is caught by the weft across the whole width, the tape cannot narrow freely when stretched. This is the most important technical difference from knitted elastic, in which the loops are drawn out and the tape visibly narrows.
Elastic thread: rubber or elastane
- Rubber (latex) thread – gives strong recovery and a “firm” pull; more sensitive to high temperature, chlorine and oils.
- Elastane (spandex) – lighter, more resistant to washing and ageing, preferred for lingerie and sportswear.
Covering thread
Polyester is the most common choice because it is strong, colourfast and dyes accurately. Cotton gives a matte, more natural look and a soft touch, but is less resistant to wear. Polyamide is used when a smooth, slightly shiny surface is wanted.
Main properties of woven elastic
| Property | What it means in practice |
|---|---|
| Stable width | The tape does not narrow when stretched, so the waistband looks even. |
| Does not roll | The ribs and dense edges prevent twisting in the casing. |
| Controlled stretch | It can be produced firmer or stretchier depending on the product. |
| Strong edges | It withstands repeated stitching through the tape without fraying. |
| Long life | The elastic threads are protected from friction by the covering threads. |
Where woven elastic is used
Woven elastic is used wherever the tape must hold its shape and not deform after months of wear:
- waistbands of trousers, skirts, shorts and jeans with an elastic insert;
- belts, braces and adjustment straps;
- workwear, uniforms and medical clothing;
- visible waistbands on underwear and sportswear, often as jacquard elastic with a logo;
- bandages, orthoses and technical products;
- bags, backpacks and cases with elastic pockets.
A full overview of the range is in the woven elastic section.
Woven, knitted and braided elastic in brief
In sewing practice there are three main constructions. Woven elastic is the most stable and best suited to areas under load. Knitted elastic is softer and lighter, so it is used for lingerie, edges and children’s clothing. Braided elastic (made on a circular machine, with lengthwise ridges) is inexpensive and suitable for threading into a casing on light garments, but it narrows when stretched and may roll over time. A detailed comparison of all types can be found in the elastics category.
How to recognise woven elastic
- Stretch the tape – woven elastic keeps its width, knitted and braided elastic visibly narrow.
- Look at the edge – on woven elastic the edge is dense and clearly defined, with no loops.
- Examine the surface – you see regular lengthwise ribs or a pattern (on jacquard elastic), not rows of loops.
- Cut the end – woven elastic frays less and the cut stays clean.
What to consider when choosing
Before choosing woven elastic, answer a few questions: how wide is the casing or the attachment area; how strong a pull is needed; will the elastic be visible from the outside; at what temperature will the product be washed. For visible waistbands, consider a Pantone colour or jacquard elastic with a woven-in logo. For workwear that is washed often and at higher temperatures, prefer elastane and polyester to rubber and cotton.
If you are not sure, test a sample: sew a piece into the actual product, wash it several times and check whether the elastic returns to its original length.
How woven elastic is sewn in series production
In factories, woven elastic is sewn in two main ways. In the first, it is threaded through a ready-made casing and the ends are joined and caught in the side seams. In the second, it is sewn directly to the top edge of the garment with a coverstitch or overlock machine, stretched evenly, then turned to the inside and stitched again. The second method is faster and gives a more stable waistband, but it requires precisely calculated tension.
- Use a jersey or stretch needle so as not to cut the elastic threads.
- Prefer polyester thread, which has some stretch of its own and does not break when the waistband is stretched.
- Set the stitch length slightly longer than usual so as not to perforate the tape too densely.
- Check the tension every few garments – with automatic feeding, a small deviation accumulates across the whole run.
Storing and handling rolls
Elastic threads, especially rubber ones, age faster in light, heat and near ozone (for example next to electric motors). Store rolls in closed cartons in a dry, cool place away from radiators. Before cutting, leave the elastic for a few hours without tension so that it relaxes after winding, otherwise the cut pieces may turn out shorter than intended.
Woven elastic from Polkom
Polkom is a Bulgarian manufacturer of haberdashery and accessories for fashion, furniture, footwear and bags, based in Sofia. We supply woven elastic in standard colours and to order – colour-matched to a sample or Pantone, in various widths and stretch levels, including jacquard elastic with the brand logo. We send samples and deliver across the EU. Describe the product and quantities in a request for a quote and we will suggest a suitable option.
Share this article














