Wholesale Zips – How to Order Zips for Production

Polkom · 4 min read
Wholesale Zips – How to Order Zips for Production

Wholesale zips are ordered by specification, not by photo: the manufacturer needs to know the chain type (metal, coil, moulded or invisible), size, construction (closed-end, open-end, two-way), length, slider type, tape colour and quantity per variant. The more complete the inquiry, the faster you get an accurate offer and the lower the risk the batch won’t fit the pattern. Below is a checklist that works for all zip types.

Wholesale zips: why “20 cm black zip” is not enough

For a sewing workshop, a zip is a component with at least eight parameters. If one is missing, the manufacturer will either ask back or assume a standard option that may not be yours. Typical misunderstandings include size 5 instead of size 3 for a dress, closed-end instead of open-end zip for a jacket, wrong slider without automatic stop for trousers, or a different black shade between tape and fabric. Each such mistake stops the production line.

Zip ordering checklist for garments

1. Chain type

  • Metal – jeans, jackets, leather goods, bags. See metal zips.
  • Coil – dresses, trousers, sweatshirts, home textiles; lightweight and flexible.
  • Moulded – sportswear and outerwear, backpacks, workwear; rust-resistant.
  • Invisible – dresses, skirts, formalwear; only the slider is visible from outside.

2. Size

The size (3, 5, 8, 10) roughly corresponds to the width of the closed chain in millimetres. Larger size means stronger but also more visible and heavier zip.

3. Construction

Closed-end (bottom stop), open-end (fully separable – for jackets) or two-way (two sliders – for long jackets and sleeping bags). For two-way, specify whether sliders meet “head to head” or “back to back”.

4. Length

Specify how it is measured – usually from the top stop to the bottom end of the chain, excluding the tape above. For a range of sizes, give a separate length for each height. If there are many models, consider zip by the metre with separate sliders.

5. Slider and puller

Automatic stop (for trousers and skirts), free slider (for decorative pockets), double-sided puller (for jackets opening from inside), metal finish and need for logo puller.

6. Colour

Colour code from a colour card, Pantone reference or physical fabric sample. For metal zips – separate finish for teeth and slider.

7. Quantity per variant

Table: model, colour, length, quantity. This allows the manufacturer to plan production and packaging by model.

8. Documents and requirements

OEKO-TEX® certificate, nickel-free accessory requirement, recycled tape – specify these in the first inquiry.

Sample inquiry table

ModelType / SizeConstructionLengthSliderColour
DressInvisible Size 3Closed-end55 cmDrop, automaticPantone from fabric
JeansMetal Size 5Closed-end18 cmAutomatic, old goldIndigo tape
JacketMoulded Size 5Open-end65 cmDouble-sided pullerBlack

Such a table replaces a whole series of emails.

Zips in Sofia and nationwide: warehouse or production

Many search for “zip store Sofia” when they need a zip today. For production, the logic is different. Retail stores sell single pieces from a limited range. Wholesale manufacturers work with two channels: standard zips from stock, shipped quickly by courier across Bulgaria and the EU, and custom zips – with specific length, colour sample or logo puller. Therefore, the workshop location – Sofia, Plovdiv or another city – matters less than whether the manufacturer holds stock and how fast they send samples.

Sewing materials: zips together with other haberdashery

When ordering zips, order related components at once: threads in matching colours, buttons, pullers, tapes. This way, colour matching is done against one fabric sample, and delivery arrives in one package. If your collection requires the YKK brand, Polkom supplies original YKK zips.

Samples before production

Before bulk order, request a sample of each new zip type and sew it into a prototype. Check slider movement through seams, behaviour during washing and ironing, and colour in daylight. Especially for invisible zips, the presser foot and fabric type affect the result.

Packing and batch acceptance

Ask for zips to be packed by model, colour and length, with a label on each package. This saves hours when sorting in the workshop. Upon receipt, randomly check several packages of each variant: length, size, colour against approved sample, slider movement and automatic stop function. If you find deviations, photograph the package with its label and notify the manufacturer before cutting – this is when problems are easiest to solve without production delays.

Most common ordering mistakes

  • Missing length for each size in the range.
  • Not specifying if the zip is open-end.
  • Colour specified by screen, not physical sample.
  • Slider lacks automatic stop where needed.
  • Quantities not divided by colour and length.

Ordering zips from Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags based in Sofia with over 30 years of experience. We offer metal, coil, moulded and invisible zips from stock and custom-made, sliders with logo (see branding), fast samples and delivery across the EU. Find all types in the zips category. Send your parameter table via the inquiry form – minimum quantities depend on the article.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can I order wholesale zips with different lengths in one order?
Yes. It is normal in production for one model to have several lengths by size. Provide a table with length and quantity for each size and colour. For ranges with many lengths, it may be practical to order zip by the metre with separate sliders and cut in-house, but this requires equipment and experience for insertion.
How do I choose the zip size for garments?
Size 3 is for fine items, dresses and pockets; size 5 is universal for trousers, jeans, jackets and bags; sizes 8 and 10 are used for heavy jackets, coats, backpacks and luggage. The choice depends on load and fabric thickness. If unsure, request samples of two sizes and sew them into a prototype.
Does it matter if the manufacturer is in Sofia?
For serial production, stock availability, sample speed and reliable delivery are decisive. Standard zips are shipped by courier to any city in Bulgaria and the EU, and for custom orders communication and approval are remote. If you are in Sofia, you can arrange a meeting to review samples.
What should I do if the zip colour does not match the fabric?
Send a physical fabric sample, not a photo, and compare it with the colour card or a lab sample in daylight. For custom zips, the tape can be dyed to sample. Approve the colour in writing before production to have a clear reference when receiving the batch.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.