Contents
A YKK zip for a leather jacket is most often an open-end No. 5 or No. 8 metal zip, and on long styles a two-way open-end zip that can also be opened from the bottom. On designer jackets where the zip is a statement, the premium Excella line with polished teeth is used. The finish – nickel colour (nickel free), black nickel colour, antique brass or gold – is matched to the eyelets, buckles and other metal accessories.
What a leather jacket zip must withstand
A leather jacket is a product worn for years. The centre front zip is opened and closed thousands of times, often with one hand and at an angle. Leather is stiffer than textile and resists when fastening, and on biker styles the zip is also a decorative element visible from afar. That is why the zip must be strong, smooth in movement and right in look all at once. An original YKK metal zip is the logical choice precisely because of this combination.
YKK zip for a leather jacket: open-end or two-way
Open-end zip with one slider
The standard solution for hip-length jackets. The bottom end has a box and pin that allow the two halves to separate completely. It suits classic biker and bomber styles.
Two-way open-end zip
It has two sliders – upper and lower. The lower one lets you open the jacket from the bottom when sitting or riding a motorbike, without unzipping the whole jacket. It is essential on long jackets, short coats and leather trench coats.
Closed-end zips on the jacket
Besides the centre front zip, a leather jacket often has zips on the pockets, sleeves and side seams. Closed-end metal zips are used here, usually a smaller size than the centre front zip but in the same finish.
Chain size
| Position | Usual size | Type |
|---|---|---|
| Centre front zip, light jacket | No. 5 | Open-end |
| Centre front zip, biker or winter jacket | No. 8 | Open-end or two-way |
| Pockets | No. 3 or No. 5 | Closed-end |
| Sleeves and cuffs | No. 3 or No. 5 | Closed-end |
| Decorative zips | No. 5 or No. 8 | Closed-end |
The table is a guide. On thin lambskin, No. 5 is usually enough and looks more elegant, while on thick cowhide No. 8 is more proportionate and stronger.
Metal or Excella for a leather jacket
The standard YKK Metal line is strong and reliable and fits well in mid-market jackets, especially with matte or antique finishes. Excella is the premium line with polished teeth that turns the zip into jewellery – suitable for designer styles and collections where the trims are part of the brand’s identity. Good practice is for the centre front zip to be Excella and the pocket zips to be in the same finish, so that the product looks coherent.
Finish and matching the other accessories
A leather jacket usually has a lot of metal: collar eyelets, a belt buckle, rings, rivets. If the zip is in a different tone, the difference is immediately visible. Choose the zip finish after you have defined the other metal accessories, or order them together. Polkom’s range includes eyelets and accessories for footwear and leather, which we can select in a similar tone.
- Nickel colour (nickel free) – classic silvery, suits black leather.
- Black nickel colour or dark finishes – a more discreet, modern look.
- Antique brass – vintage and brown leathers.
- Gold – women’s and luxury styles.
Zip length
For open-end zips, the length is measured from the top stop to the bottom end of the box. Since jackets are sewn in several sizes, several lengths are usually needed – one for each size or for a group of sizes. Calculate them from the pattern, taking into account how far the zip will go into the collar and the hem. Even a centimetre’s difference on an open-end zip distorts the front.
Tips for sewing in leather
- Use a needle and foot suitable for leather and a longer stitch so as not to perforate the leather too densely.
- Do not use pins – they leave holes. Fix the zip with double-sided leather tape.
- Leave a few millimetres between the teeth and the edge of the leather so that the slider does not snag.
- Check the symmetry of the two halves before final stitching – with an open-end zip, the mistake is immediately visible.
- With a two-way zip, test both sliders after fitting.
Tape colour on leather jackets
The zip tape is less visible than the teeth, but with an open jacket and on pocket zips it is part of the look. With black leather, a black tape is most often chosen, and with brown and coloured leathers, a tape in the tone of the leather or the lining. Some brands use a contrasting tape as a design detail, for example a burgundy tape on black leather. Whatever you choose, the decision must be the same for all zips on the style, otherwise the product looks inconsistent.
Sample and test before the production run
Before you start the production run, sew the zip into a prototype made from the actual leather. Open and close it repeatedly, check that the slider passes smoothly through the collar and hem and that the open end slides easily into the box. Put the jacket on and sit down – this will tell you whether the length is right and whether a two-way slider is needed. Only then approve the specification for ordering.
Common mistakes
- A closed-end zip as the centre front zip – the jacket cannot be taken off comfortably.
- Too small a size on thick leather – the zip looks out of proportion and splits.
- A one-way zip on a long jacket – uncomfortable when sitting.
- Different finishes on the zip and the eyelets – the product looks unfinished.
- A tape colour that does not match – choose a number from the YKK colour card to suit the leather or lining.
How to order
Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags and supplies original YKK zips – YKK is a third-party brand that we do not manufacture. Send us the jacket style, the lengths by size, the Metal or Excella line, the finish and the tape colour via the contact page. We will prepare samples and a quote and, if needed, put together the other metal accessories as well.
Share this article














