Zip in Fabric Colour – Matching by Swatch and Custom Dyeing

Polkom · 4 min read
Zip in Fabric Colour – Matching by Swatch and Custom Dyeing

A zip matching the fabric colour can be achieved in two ways: selecting the closest standard colour from a colour chart, such as YKK, or custom dyeing based on a swatch when no standard colour exists. In most cases, the standard colour is close enough. To do this, send a physical fabric swatch – not a photo – and approve the zip sample before placing a bulk order.

Zip in Fabric Colour – Two Approaches

ApproachWhen SuitableAdvantagesLimitations
Standard colour from chartMost casesFaster, more cost-effective, easy to repeatPerfect match not always possible
Custom dyeing by swatchUnique colours, brands with strict standardsMaximum closeness to fabricRequires more time and quantity; details clarified on inquiry

Which Fabric Swatch to Send

  • Physical swatch – a piece of the actual fabric, not a photo or a supplier’s catalogue number.
  • Large enough – at least enough to cover the tape swatch and show texture; bigger is better.
  • From the production batch – if possible, send fabric from the batch to be sewn. Catalogue swatches can differ from actual delivery.
  • Washed sample – if the fabric is washed before cutting or the garment is garment-washed, send a washed swatch as well.
  • Labelled – with your colour and model code to avoid confusion when sending multiple swatches.
  • Light reference – specify the light source for colour approval if required (e.g. D65).

How the Matching Process Works

  1. The fabric swatch is compared to the colour chart under standard lighting.
  2. One or several closest colour numbers are selected.
  3. The colour numbers are offered, and if needed, a zip sample in the chosen colour is provided.
  4. You approve the sample under your conditions – on the fabric, in daylight, and in store lighting.
  5. The approved colour number is recorded in the specification and used for all future orders.

When Standard Colour Is Not Enough

Custom dyeing is worthwhile when:

  • The colour is very specific – a trendy seasonal shade not in the standard chart;
  • The zip is visible and an important design element;
  • The brand has a corporate colour that must be precisely matched;
  • Your client requires strict colour matching criteria;
  • The collection is large enough to justify the quantity for one colour.

Custom dyeing takes more time because it involves recipe development and approval of a lab dip sample. Possibilities, minimum quantities and lead times depend on the item and are clarified on inquiry.

Lab Dip – What It Is

A lab dip is a small sample tape dyed in a lab according to the recipe developed for your colour. It is sent for approval before dyeing the production batch. When approving:

  • Compare under the brand’s main light source and at least one secondary source;
  • Compare the sample on the fabric, not beside it;
  • If not exact, describe corrections clearly – “lighter”, “less red”, “more saturated” – to adjust the recipe;
  • Keep the approved sample as a reference.

How Close Is “Close Enough”

Perfect matching between tape and fabric is rarely possible because materials and dyes differ. The goal is for the zip not to be noticeable as different under normal viewing. The more visible the zip, the stricter the criterion:

  • Concealed zip – very close match; darker shade hides differences;
  • Zip under flap – close tone; small difference allowed;
  • Visible zip – close match or intentional contrast.

Timing Considerations

Colour matching by swatch adds a step to the schedule – exchanging samples and approval. With a standard colour from the chart, this step is short; with custom dyeing, it is longer due to recipe development and possible corrections. The practical advice is to send fabric swatches as soon as the collection fabric is confirmed, not when it arrives at the workshop. Waiting for production fabric to select the zip risks zip delays relative to cutting. When the production batch fabric arrives, compare it to the approved zip swatch – if the fabric tone shifted, better to know before sewing.

Seasonal and Repeat Colours

For basic models repeated every season, swatch matching is done once, and the colour number is recorded and reused. Seasonal fashion colours bring new swatches each season. Separate your collection into these two groups to know where new matching procedures are needed and where not.

Common Mistakes

  • Sending a photo instead of a swatch;
  • Sending a catalogue swatch, not from the actual fabric batch;
  • Approving under one lamp in the workshop only;
  • Matching on unwashed fabric when the garment is washed after sewing;
  • Ordering without an approved zip swatch for critical colours.

Consistent Colours for All Accessories

If the fabric is matched and the zip is in tone, logically other accessories – threads, labels, buttons, elastics – should follow the same logic. Good practice is to send the same fabric swatch for all accessories and keep a common table of approved colours. This makes the collection look cohesive.

Ordering Through Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags, supplying original YKK zips – spiral, metal, moulded and invisible. More about the colour system is on the YKK colour chart for zips page. Send fabric swatches and we will select the closest colours or discuss custom dyeing.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Can I order a zip in the exact colour of my fabric?
Yes. First, the closest standard colour from the colour chart is sought, which is sufficient in most cases. If none fits, custom dyeing by swatch can be discussed, involving recipe development and lab dip approval. Possibilities, quantities and lead times depend on the item and are clarified on inquiry.
What fabric swatch should I send for zip colour matching?
Send a physical piece of the actual fabric, preferably from the batch to be sewn, large enough to cover the tape swatch. If the garment is washed after sewing, include a washed swatch. Label the swatch with your colour and model code. A photo is not sufficient for accurate matching.
What is a lab dip for zips?
A lab dip is a small sample tape dyed in a lab according to the recipe developed for your colour. It is sent for approval before dyeing the production batch. Compare it on the fabric under standard light. If not exact, describe corrections clearly, and keep the approved sample as a reference.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.