Zip Price – What Determines the Cost of a Zip

Polkom · 4 min read
Zip Price – What Determines the Cost of a Zip

The price of a zip is determined by seven factors: the type of chain (metal, coil, moulded, invisible), size, length, construction, slider with puller, finish and colour, as well as order quantity. Two zips of the same length can differ significantly in cost if one is a coil #3 from stock and the other a metal #8 separable zip with a logo slider. Understanding the weight of each factor helps you choose the right zip without overpaying for unnecessary features.

Zip price by chain type

TypeWhat Increases CostWhat Reduces Cost
CoilLarge size, special tape, waterproof coatingStandard colours, small sizes, large order quantity
InvisibleLace or fine tape, metal slider, colour matching sampleStandard tape, stock colours
MouldedLarge size, separable construction, two-way sliderStandard colours, non-separable models
MetalBrass, polished teeth, special finishesAluminium teeth, standard finish

Metal zips are usually the most expensive group because each tooth is a separate metal element, and finishing is a separate process. Coil zips offer the most budget flexibility and therefore dominate mass-market garment production.

Zip price: size and length

The size determines the amount of material in the chain and the slider size. The price difference between #3 and #5 coil zips is smaller than between #5 and #8 metal zips, but it becomes noticeable with large orders. Length affects price less than expected: most of the cost of a finished zip comes from the slider, stops and assembly operations, not the chain length. That’s why 18 cm and 22 cm zips of the same type often cost almost the same.

Slider price: the most underestimated factor

The slider can be the most expensive part of a zip. Its price depends on:

  • Mechanism – auto-lock, free pull, pin lock, two-way puller.
  • Material – zinc alloy, brass, plastic.
  • Finish – nickel colour (nickel free), antique gold, black nickel colour (nickel free), painted colours.
  • Puller – standard, rubberised, cord, metal with embossed logo.

A logo slider requires a mould. This is a one-time cost that spreads over repeated orders. Learn more about branding on the branding with logo page.

Invisible zip price

For invisible zips, price is mostly influenced by the tape and slider. Standard polyester tape in stock colours is the most affordable. Fine tape for silk dresses, lace tape or metal drop sliders add cost. Colour matching the tape to fabric requires dyeing and lab approval. See models in the invisible zips category.

Zip by the meter price: when is it more cost-effective?

Zip by the meter (chain on a roll) is purchased separately from sliders. The workshop cuts the required length and attaches sliders and stops.

More cost-effective when

  • You have many different lengths in the series – covers, upholstery, mattresses, non-standard products.
  • You produce small batches of many models and don’t want stock of finished zips.
  • The zip is long (over one metre) or length is determined during cutting.

Less cost-effective when

  • The workshop lacks experience or equipment for attaching stops – labour costs outweigh savings.
  • You need a separable zip for jackets – these are only produced as finished zips.
  • The series is large and of one length – finished zips are faster for the production line.

Finish and colour

Standard colours from the colour card are most affordable because the tape is in continuous production. Colour matching by Pantone or fabric sample requires separate dyeing. For metal zips, the finish of teeth and slider (antique gold, black nickel colour (nickel free), matte or gloss) is a separate cost. If your collection uses one finish for all metal accessories, consolidate orders to approve finishes once.

Order quantity and preparation

As with all accessories, unit price decreases with order quantity. This is due to preparation: machine setup, tape dyeing, slider mould, packaging by model. These costs are nearly the same for small and large orders. If the same zip is used in several models, combine quantities. Minimum order quantities depend on the item – send an inquiry.

Hidden costs beyond the zip price

  • Defects during sewing. An unsuitable size for the fabric causes seam tearing or catching.
  • Returns. Zips are among the most common reasons for garment returns. A better slider costs less than one return.
  • Lead times. Colour matching takes longer than stock colours – plan accordingly.

How to reduce costs without compromising quality

  • Standardise. Use one type and size of zip in as many models as possible – this increases quantities and preparation is done once.
  • Brand where it matters. A logo slider makes sense on the outer jacket zip, but not on an inner pocket.
  • Choose a colour from the card if close enough. For dark and neutral colours, the difference from colour matching is often unnoticeable, especially for invisible zips.
  • Don’t overestimate size. Size 8 on a lightweight dress adds weight and cost but not strength.
  • Plan orders in advance. Rush deliveries and split shipments cost more than one well-planned order for the season.

What to send for a quote

  1. Zip type and size.
  2. Construction – separable, non-separable, two-way.
  3. Length for each variant or need for zip by the meter.
  4. Slider and puller, finish, logo.
  5. Colour – code, Pantone or fabric sample.
  6. Quantity by colour and length.

The full range is available in the zips category.

Zip quote from Polkom

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags based in Sofia with over 30 years of experience. We supply coil, invisible, moulded and metal zips, zip by the meter and sliders, including original YKK zips, with fast samples and delivery across the EU. Send your specifications via the request a quote form and we will offer you more cost-effective alternatives if available.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Why does the slider sometimes cost more than the zip itself?
The slider is a complex mechanical part: body, spring or pin for auto-lock, puller and finish. When metal, with a logo or custom puller, it requires a mould and several processes. The chain is produced continuously in long lengths, so for some models the slider accounts for most of the final cost.
Is a longer zip much more expensive?
Usually not. For finished zips, most of the cost is slider, stops and assembly; the chain is a smaller part. A few extra centimetres rarely affect price noticeably. For very long zips, e.g. sleeping bags or tents, the difference becomes visible and zip by the meter may be worth considering.
Can I order zip by the meter and sliders separately?
Yes, coil and some moulded zips are offered as chain on a roll with compatible sliders. Make sure the slider matches the chain type and size, and allow for stops. This option suits upholstery, home textiles and non-standard products, but separable jacket zips are only made as finished zips.
Is an original YKK zip worth it?
YKK is a reputable brand with consistent quality and a wide range; many brands and retailers require it in their specs. Whether it’s worth it depends on your product positioning, expected use and client requirements. Polkom supplies original YKK zips as well as alternatives so you can compare both in one quote.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.