Zips for Children’s Jackets and Clothing – Safety and Comfort

Polkom · 4 min read
Zips for Children’s Jackets and Clothing – Safety and Comfort

For a children’s jacket, the usual choice is a light No. 5 moulded plastic zip – open-end, with an auto-lock slider and a large puller the child can grip alone. The top end should be covered with a chin guard (zip garage), and the puller should have no long cords or sharp edges. Snowsuits and long jackets use a two-way zip.

Zips for children’s jackets: why moulded

Children’s clothes are worn actively: running, sliding, climbing, snow and mud. A moulded zip suits these conditions because:

  • it is lighter than a metal zip and does not weigh on a small body;
  • it does not get cold and is not unpleasant against the skin;
  • it does not rust from snow and frequent washing;
  • the teeth are chunky and the slider moves easily, even when the child dresses alone;
  • it can come in bright colours that children like.

Size number and type

ProductTypeSize number
Children’s winter jacketOpen-end mouldedNo. 5
Ski suitTwo-way mouldedNo. 5
Sweatshirt, fleeceOpen-end moulded or nylon coilNo. 3–5
Ski trousers (legs)Closed-end moulded or nylon coilNo. 3–5
PocketsClosed-endNo. 3
Sleeping bagTwo-way nylon coilNo. 5

No. 5 is a good balance between strength and weight. A larger size number is usually not needed for children’s sizes.

Safety

In children’s clothing, safety matters more than looks. The zip and the accessories around it must be designed so that they do not create a risk.

Cords and pullers

In Europe, a safety standard for cords and drawstrings on children’s clothing (EN 14682) applies, which restricts cords in the head and neck area and the length of hanging elements elsewhere. When designing a cord zip puller, check the requirements of the standard for the specific age group. In practice, short, solid pullers without hanging cords are chosen for small children.

Small parts

The slider and puller must be firmly connected so that they cannot be torn off and swallowed. Choose a quality slider with a reliable connection to the puller and pull-test the sample.

Chin guard

A small textile pocket at the top end into which the slider tucks when the zip is closed all the way up. It protects the chin and neck from chafing and pinching. On children’s jackets this is an essential detail.

Inner placket

An inner textile placket along the whole length of the zip protects the body and the garment underneath from getting caught in the slider and keeps out the wind.

Easy dressing on their own

Nurseries and schools expect children to dress themselves. A few details help:

  • A large puller – easy to grip with gloves and small fingers.
  • A clearly visible bottom mechanism – a contrasting colour on the box helps the pin go in more easily.
  • Smooth movement – a moulded zip with chunky teeth jams less often than a fine coil.
  • An auto-lock slider – the zip does not slide down during play.

Colour and design

Moulded zips suit children’s collections thanks to their colour freedom: bright, neon and contrasting teeth, pullers in the shape of animals or brand symbols. A coloured zip and cord stoppers in the same colour give the garment a finished look. Reflective elements on the tape or puller increase the child’s visibility in the dark.

Washing and durability

Children’s clothes are washed more often than any others. The zip must withstand many cycles without any change in colour or function. A moulded zip copes well; it is important to close it before washing and not to iron directly on the teeth. There are details on this in a separate article on caring for plastic zips.

How to choose the length

Children’s sizes change every few centimetres of height, and the zip length is different for almost every size. That is why in serial production a table of lengths by size is ordered. An open-end zip cannot be shortened at the bottom, so the measurements must be exact. On snowsuits the length is greater, as the zip often reaches the knee.

Detachable parts and convertible garments

Many children’s jackets have a detachable hood, a fleece lining or sleeves that unzip and turn the jacket into a gilet. These parts are attached with separate open-end zips, usually No. 3 or No. 5. Here it is important that the zip can be fastened easily by both an adult and a child, and that its ends are reinforced, because detachable parts are taken off and put on often. It is convenient if the detachable zips are a different colour from the centre front zip so they are not confused.

Zips on trouser legs

Ski trousers and snowsuits often have short zips at the bottom of the legs that make it easier to put on boots. Closed-end No. 3–5 zips are used here, with an inner placket that keeps out snow.

Common mistakes

  • A metal zip on a children’s jacket – heavy and cold against the skin.
  • A missing chin guard.
  • Long cords on the pullers in the head and neck area.
  • A puller that is too small for the child to grip.
  • Incorrect lengths across the different sizes.

See the range in the moulded plastic zips category, the lighter options in nylon coil zips and the general zips category.

Polkom – accessories for children’s clothing

Polkom is a Bulgarian manufacturer of accessories for fashion, furniture, footwear and bags, based in Sofia, with over 30 years of experience. We offer moulded zips in bright colours, logo sliders, cord stoppers and cords for children’s clothing manufacturers across the EU. Send an inquiry with a description of the style and the size range.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

What zip size is used for a children’s jacket?
For most children’s jackets and snowsuits, a No. 5 moulded zip is suitable – strong enough and at the same time light. For light sweatshirts and fleeces, No. 3 can be used. Pockets usually take No. 3. A larger size number is rarely needed for children’s sizes and only makes the zip heavier and stiffer.
What is a zip garage?
A zip garage (chin guard) is a small textile pocket at the top end of the zip into which the slider tucks when the jacket is fastened all the way up. It protects the chin and neck from chafing and pinching and prevents scratching. On children’s jackets it is an essential detail, and it is also common on adult sports and ski jackets.
Can the zip puller on a children’s jacket be made of cord?
It can, but with care. In the EU, a safety standard for cords and drawstrings on children’s clothing applies, which restricts cords in the head and neck area and the length of hanging elements. For small children it is safer to use short, solid pullers without hanging cords.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.