Contents
For zips used in tents, awnings and canopies, strong size 8 or 10 zips are used – spiral zips for curved sections (like tent doors), and moulded zips for straight, heavily stressed parts. Metal zips are avoided because they corrode from moisture. Important features include two-way sliders, UV-resistant tape, and the ability to open the zip from both inside and outside.
Zips for tents: what makes them special
The zip on a tent or awning faces very different conditions than a garment zip. It is exposed to weeks of sunlight, rain, dew, sand, mud and cold. The surrounding material is stretched, and the door is opened and closed dozens of times a day, often with one hand or in the dark. Therefore, selection is based on different criteria:
- resistance to moisture and corrosion;
- UV resistance – tape and plastic must not become brittle;
- strength under tension;
- smooth movement despite sand and dirt;
- ability to open from both sides.
Moulded or spiral zip
Spiral zip
The spiral chain bends easily, making it standard for curved tent doors (D-shaped, arched), windows and insect nets. If the spiral separates, it can often be “closed” again with a few slider moves, which is an advantage in the field. See spiral zips.
Moulded zip
Moulded zips with solid plastic teeth are more resistant to sand and dirt, do not corrode and withstand high lateral stress. They are suitable for straight sections with strong tension: awning doors, canopy sides, vinyl covers, greenhouse doors, boat and equipment covers. For tight curves, they are less suitable than spiral zips.
Why not metal
Metal zips oxidise from constant moisture and can leave rust stains on light fabrics. They are also heavier and cold to the touch. They are rarely used for tents and awnings.
Size
| Application | Type | Size |
|---|---|---|
| Insect net, pockets | Spiral | No. 5 |
| Tourist tent door | Spiral | No. 8 |
| Large camping tent | Spiral or moulded | No. 8–10 |
| Caravan awning | Moulded or spiral | No. 8–10 |
| Awnings, gazebo sides | Moulded | No. 8–10 |
| Greenhouse, foil and vinyl | Moulded or spiral | No. 8–10 |
Sliders
- Two-way sliders – the door can be opened from top, bottom or middle. Large doors often use two sliders on one chain.
- Double-sided pulls – handles on both sides of the slider, allowing opening from inside and outside. Essential for tents.
- Non-locking sliders – easier to move; locking is not needed for tents.
- Cord pulls – easier to grip with gloves or in the dark; often combined with cord stoppers.
Tape and material
For products exposed to sunlight, tape quality is as important as the chain. Look for polyester tape that sews well to thick materials like PVC, tarpaulin or coated fabrics. For enhanced waterproofing, the zip is covered with a flap of the same material or a hook and loop tape that seals the seam above it. A useful additional option is hook and loop to hold the open door in place.
Zips for greenhouses and vinyl covers
Greenhouses made of foil and vinyl covers (for terraces, restaurant gardens, boats) have zips sewn or welded onto thick material and exposed to UV and temperature changes. Preferred are moulded zips No. 8 or 10 with wide tape, providing more seam area. Two-way sliders allow the “window” to open partially for ventilation.
How to sew a zip into thick material
Tent fabrics, tarpaulin and PVC behave differently from garment fabrics. The needle leaves permanent holes, and thick layers challenge the machine. Some practical tips:
- Use a machine with top feed or walking foot to prevent layer shifting.
- Choose a thick needle and strong polyester thread resistant to UV.
- Fix with double-sided adhesive tape, not pins – pins leave holes.
- Sew two parallel lines on each side of the zip for extra strength.
- Reinforce ends with bartack or leather/textile patches – these are high-stress points.
For welded PVC products, the zip is often first sewn onto tape, which is then welded to the cover.
Outdoor maintenance
- Brush sand and dust off the chain before packing the tent.
- Do not pull the slider forcefully when the material is stretched – loosen the tensioners.
- Lubricate with dry lubricant (paraffin or silicone spray), not oil.
- Store the product dry – moisture combined with dirt accelerates wear.
Common manufacturing mistakes
- Size 5 zip on a large door – chain separates under tension.
- Slider with pull on only one side – door cannot be opened from inside.
- Moulded zip on a tight curve – teeth jam.
- No flap over the zip – water penetrates the chain.
The full range of moulded zips and other types in the zips category is available on the website.
Polkom – zips for technical products
Polkom is a Bulgarian manufacturer of accessories from Sofia with over 30 years of experience. We supply moulded and spiral zips in large sizes, sliders with double-sided pulls and related accessories – cords, stoppers, hook and loop – for manufacturers of tents, awnings and outdoor products in the EU. Send a request with your product description.
Share this article














