Cabinet Knobs – Types, Sizes and Fitting of Furniture Knobs

Polkom · 4 min read
Cabinet Knobs – Types, Sizes and Fitting of Furniture Knobs

Cabinet knobs are furniture handles with a single fixing point, fitted with one screw through the front of a door or drawer. The choice comes down to three questions: which shape suits the furniture, which diameter and height are comfortable to grip, and how thick the front is, so the right screw can be chosen. In this article you will find the answers together with practical fitting tips.

Types of cabinet knobs by shape

Shape determines not only the style but also the grip – how easily the fingers close around the knob.

  • Round – the most versatile shape; the head can be flat, domed or have a finger recess.
  • Mushroom – a narrow neck and a wider head; easy to hold with two fingers and a classic on chests of drawers and country-style kitchens.
  • Square and rectangular – for fronts with straight lines and modern kitchens.
  • Cylindrical ("post" type) – a slim stem with a flat head, often in black or stainless steel.
  • Decorative – faceted, embossed or with a ceramic, wood or leather insert.
  • T-bar and elongated knobs – a halfway solution between a knob and a pull handle, still fitted with a single screw.

Sizes: diameter and height

Knobs have no hole centres, so the main dimensions are the diameter (or side length for square knobs) and the height – how far the knob projects from the front.

Head diameterTypical use
about 15–20 mmsmall drawers, jewellery boxes, spice cabinet doors
about 25–32 mmkitchen cabinet doors, bedside tables, chests of drawers
about 35–45 mmlarger doors, sideboards, children's furniture

The height is usually between 20 and 35 mm. Low knobs look clean but need room for the fingers – a recessed head helps here. Taller knobs are easy to grip, but in narrow hallways and children's rooms they can catch on clothing. It is good practice to try a sample on a real front before fixing the size for the whole series.

Fitting cabinet knobs with a single screw

A standard knob has a threaded base and is fixed with an M4 screw from the inside of the front. Some models have a double-ended stud that screws into the knob and is tightened with a nut on the inside.

How to choose the screw length

Screw length is set by the front thickness plus the thread depth in the knob. A rule of thumb: front thickness + 6–10 mm. For an 18–19 mm front a screw of about 25 mm is most common, while thicker or veneered fronts need a longer one. A screw that is too long stops the knob from sitting flush, and one that is too short engages only a few threads, so the knob works loose.

Fitting steps

  1. Mark the position with a template, so all knobs sit at the same height.
  2. Drill a hole of about 4.5–5 mm from front to back, with a backing board behind so the edge does not split.
  3. Insert the screw from the inside and screw the knob on by hand.
  4. Tighten moderately – with zinc alloy, excessive force can strip the thread.
  5. For knobs with a set orientation (square, T-bar), align them before the final tightening.

Where to place the knob

On base cabinet doors the knob usually goes in the top corner on the opening side, and on wall cabinets in the bottom corner. On drawers the knob is centred across the width; wider drawers take two knobs or a pull handle.

Materials and finishes

  • Zinc alloy – allows detailed shapes and a solid weight; the most common material for decorative knobs.
  • Aluminium – light, suited to minimalist models and anodised finishes.
  • Stainless steel – for kitchens and bathrooms where there is moisture.
  • Ceramic – as a head or insert on classic and Provençal furniture.

Finishes range from chrome and satin chrome to gold, matt gold, antique brass, bronze, black and anthracite, and if needed powder coating in the colour of the front. All Polkom metal knobs are nickel free. When one piece of furniture has knobs and handles from different batches, ask for the same finish across the whole order – a difference in shade shows immediately, especially with gold and antique brass.

Children's and kitchen furniture – what to watch

For children's furniture, choose knobs with rounded edges and no protruding details that could catch. The fitting must be tight, so the knob does not unscrew when pulled. In the kitchen, easy cleaning and resistance to grease and moisture matter – smooth heads without deep relief are the easiest to maintain.

When a knob and when a handle

A knob suits small, light fronts that open with one movement of the fingers. On wide drawers, heavy doors and tall cabinets a two-screw handle is more comfortable – see furniture handles. For classic-style chests of drawers, an alternative is drop handles with a backplate rose, which also fit through a single hole. The best result comes when knob and handle belong to one series – with the same profile and finish. Ideas for such series are in the article Furniture Handles 2026 – New Collection and Catalogue.

Cabinet knobs from the manufacturer

Polkom is a manufacturer of cabinet knobs for furniture factories, kitchen studios and makers of children's and hotel furniture, with its own production in Sofia. We make standard models and knobs to your drawing, in the colour you choose and with an engraved or embossed logo. The minimum quantity is usually 1000 pcs per model, the sample depends on the model, and production takes 10–20 days after approval. Send the shape, size, front thickness and your logo (preferably a vector PDF) through a request for a quote.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

What screw does a cabinet knob need?
Most cabinet knobs have an internal M4 thread. The screw length is chosen as the front thickness plus about 6–10 mm to engage in the knob. For a standard 18–19 mm front, a screw of about 25 mm is usually right. In your enquiry, state the thickness of the fronts, so the correct screw can be offered together with the knobs.
Can a knob replace an old handle?
It can, but a handle has two holes and a knob only one. One old hole will remain visible, so the solution is a knob with a decorative backplate that covers it, or filling and painting the old hole. Another option is to choose a handle with the same hole centres as the old one.
What size knob should we choose for a kitchen?
Kitchen cabinet doors most often use knobs of about 25–32 mm in diameter and 25–30 mm in height. They are comfortable to grip and do not get in the way when neighbouring doors open. Smaller knobs suit small drawers and spice cabinet doors, while a pull handle is more practical on wide drawers.
Can the knobs carry a brand logo?
Yes. The head of the knob is a convenient surface for an engraved, embossed or debossed logo or monogram. This suits furniture brands, hotels and restaurants that want the same detail throughout a project. Send the logo in any format, preferably a vector PDF. A sample is approved before the series.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.