Custom Metal Logo Plates – What Drives the Price, Minimum Order and Lead Time

Polkom · 4 min read
Custom Metal Logo Plates – What Drives the Price, Minimum Order and Lead Time

The price of custom metal logo plates comes down to five things: material, size and thickness, manufacturing technique, finish and order quantity. A first order may also include tooling (a stamping die or a casting mould), which is then reused for every repeat run. At Polkom the minimum order is generally 1,000 pcs per model, a sample costs around 50–100 €, and production takes 10–20 days after approval.

Below we look at each factor in turn, so you can plan your budget and send an inquiry that can be answered with an accurate quote the first time.

What drives the price of metal logo plates

Material

The most common materials are zinc alloy, brass, stainless steel and aluminium. Zinc alloy is die-cast and allows sculpted relief and complex shapes. Brass and steel are stamped from sheet and suit thin, flat plates. Aluminium is the lightest option and works well for large badges on bags and backpacks. All Polkom metal products are nickel-free, which matters for garments and accessories in direct contact with the skin.

Size and thickness

A larger, thicker plate uses more metal and needs longer polishing and plating. The difference shows most on die-cast plates, where weight directly affects the price. On stamped plates, the sheet thickness is the main factor.

Manufacturing technique

  • Stamping – cutting and embossing from sheet. Cost-effective in volume, requires a die.
  • Die-casting – for sculpted plates with several levels. Requires a mould and gives the most premium look.
  • Laser engraving – the logo is engraved onto a finished plate. No tooling, ideal for small runs and numbering.
  • Chemical etching – fine lines and small text on a flat surface.
  • Enamel and printing – Pantone colour fill or a printed logo. Each extra colour is an extra operation.

Finish and colour

Gold, silver, antique brass, gunmetal, black, matt, gloss or a combination of the two. Special and antiqued finishes involve more handwork. You can see the full range on our colours and finishes page.

Attachment method

A plate can have sew-on holes, bendable prongs, pins, rivets or an adhesive back. Prongs and pins are made together with the plate, while rivets and backing plates are added as separate parts.

Table: factor and effect on price

FactorMore economical optionMore expensive option
MaterialAluminium, thin sheetSolid zinc alloy, brass
TechniqueLaser engraving, stampingDie-casting with multi-level relief
ColoursNo enamel, one colourSeveral enamel colours
FinishStandard silver or goldAntiqued, combined matt/gloss
AttachmentSew-on holesPins with backing plate
QuantityLarge run of one modelMany models in small quantities

Minimum order for metal logo plates

At Polkom the minimum order is generally 1,000 pcs per model. By model we mean one shape and one size. Different finishes of the same plate can often be agreed within one order, so ask about this in your inquiry. When a new die or mould is made, the tooling cost is spread over the order. On repeat orders it is not charged again.

If you need a smaller quantity for a first collection, the best solution is usually laser engraving on a standard-shape plate. There is no tooling, and the logo still looks professional.

Samples: what they cost and why they are worth it

Samples depend on the product. They usually cost around 50–100 €. A sample shows the real colour of the finish, the depth of the relief and how the plate sits on your material. This is the moment to check the logo size, the legibility of small text and the strength of the attachment. Corrections after a sample are normal and cost far less than a mistake across the whole run.

Lead time for custom metal branding plates

Once the sample is approved, production takes 10–20 days. The lead time depends on the quantity, the number of finishes and whether enamel is involved. The process looks like this:

  1. You send the logo, size, the material of the product and the preferred attachment method.
  2. You receive a technical drawing and a quote.
  3. A sample is made, plus tooling if needed.
  4. You approve the sample.
  5. Series production and delivery to your address in the EU.

How to get an accurate quote

The more complete your inquiry, the faster and more accurate the price. Please include:

  • logo file – we accept any format, but PDF or a vector file is best;
  • plate size in millimetres and the shape you want;
  • material, finish and enamel colours (Pantone references, if any);
  • attachment method and the product it goes on (denim, bag, cap, leather);
  • quantity per model and number of models.

If you are unsure which attachment to choose, also look at leather labels – a metal plate and a leather patch are often combined on one product.

Polkom – manufacturer of custom metal logo plates

Polkom is a manufacturer of garment accessories with over 30 years of experience. We make metal logo plates to your design, nickel-free and with OEKO-TEX® certification for all products. Our capacity is 500 million pieces per month across all product groups combined, so large runs are delivered on time too. Learn more about our capabilities in the branding section or send a request for a quote or sample with your logo file.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

How much does a custom metal logo plate cost?
The unit price depends on material, size, technique, finish, attachment and quantity, so we do not publish a price list. Send us your logo, size and quantity and you will receive an accurate quote. For a new model, the first order may include a die or mould cost, which is not charged again on repeat orders.
What is the minimum order for metal logo plates?
The minimum is generally 1,000 pcs per model, i.e. per shape and size. For smaller quantities the most sensible option is laser engraving on a standard plate, which needs no tooling. The exact minimum is confirmed in the quote.
How long does production take?
Series production takes 10–20 days after the sample is approved. Add to this the time for the sample and delivery to your address in the EU. If you have a collection deadline, state it in your inquiry so we can plan production around it.
What format should I send my logo in?
We accept files in any format, but PDF or another vector file (AI, EPS, SVG) is best. A vector gives precise outlines for stamping, die-casting and engraving. If you only have a raster image, we can prepare it, but this may extend the sample lead time.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.