Denim Thread – Thickness, Colour and Seam Types in Jeans

Polkom · 4 min read
Denim Thread – Thickness, Colour and Seam Types in Jeans

Denim thread is selected by operation: joining seams use a finer, very strong core-spun thread, while visible decorative stitching, the waistband and the hem use a heavier thread, often in a contrasting colour. Post-sewing treatments are decisive too, because enzyme, stone and laser washing change the colour and strength of the seam. Here is how to put together the right thread kit for one style of jeans.

Denim thread: a seam map for jeans

Jeans have around ten main operations, and almost each one has its own requirements. The table gives commonly used guidelines for thickness in tex. The ticket number depends on the system of the specific thread, so it is safer to state tex when ordering.

OperationSeam typeThickness (guide)Colour
Back rise and inside leg seamtwin-needle chainstitch, felled40–60 texcontrast or tone-on-tone
Side seamssafety-stitch overlock27–40 texmatched to the fabric
Decorative stitching on back pocketslockstitch, single or twin needle70–120 texcontrast
Waistbandmulti-needle chainstitch40–80 texcontrast
Front pockets and flylockstitch60–80 texcontrast
Belt loopscoverstitch40–60 texsame as the waistband
Bartacksbartack machine40–60 textone-on-tone or contrast
Leg hemlockstitch or chainstitch60–80 texcontrast
Buttonholekeyhole buttonhole40–60 texsame as the topstitching

The technique of the decorative stitch itself – needle and bobbin thickness, needle and stitch length – is covered separately in the article jeans thread and decorative stitching. Here we focus on combining all the operations in one style.

Which thread construction for each zone

Core-spun polyester/cotton

The polyester core provides strength, while the cotton wrap protects the thread from overheating in the needle and reacts to washing just like the fabric. After treatment, the seam fades together with the denim and gains an authentic worn look. It is used mainly for visible seams. You will find more about the construction in the article what is core-spun thread.

Core-spun polyester/polyester

It keeps its colour almost unchanged and withstands chemical treatments. It suits joining seams, overlocking and styles where the stitching contrast must stay strong after washing.

Threads for laser treatment

The laser fades the fabric by burning off the indigo on its surface, and it can cut through a standard thread in that zone. If the style has laser effects over the seams, say so in your enquiry, so that a thread with a suitable core can be offered.

Thread colour after washing

The most common surprise in denim is that the thread looks different from the shade card after washing. There are three reasons:

  • Enzyme and stone washing abrade the cotton wrap; the seam becomes lighter and softer in appearance.
  • Bleaching can change the tone of the cotton wrap, while polyester hardly reacts.
  • Indigo from the fabric stains light threads during washing, especially white and pale yellow ones.

The classic topstitching colours are golden yellow, copper orange, tobacco brown and white; minimalist styles use thread matched to the fabric. The practical rule is to sew a test piece with all the threads in the kit and wash it with the same recipe as the production run. Approve the colour after washing, not before.

Needle and stitch – quick guidelines

  • Threads of around 40 tex usually run with a 100–110 Nm needle.
  • Threads of 60–80 tex – with a 110–130 Nm needle.
  • Heavy decorative threads of 100–120 tex – with a 130–160 Nm needle and a longer stitch.
  • With a heavy needle thread, the bobbin thread is usually finer, so that the underside of the seam stays clean.

Exact values depend on the machine and the density of the fabric, so confirm them on a trial run.

Common mistakes with jeans thread

  • Approving the topstitching from the shade card without a washed test piece – after enzyme washing the seam looks paler than expected.
  • White or very light thread on dark denim without a test for indigo staining.
  • The same heavy thread in the needle and the bobbin – the underside of the seam becomes coarse and the machine stops more often.
  • Standard thread in zones with laser effects – the seam weakens exactly where the fabric has been treated.
  • Too little of the contrast colour – a top-up order may differ slightly in tone, so plan the whole season at once.

Thread and metal accessories

In jeans, the thread sits right next to the metal accessories. Bartacks reinforce the pocket corners where no rivets are fitted, and the topstitching colour is often coordinated with the finish of the jeans buttons – copper thread with an antique brass finish, light thread with a nickel-look, nickel free finish. When you order threads and accessories together, the samples are approved as a set.

How to order a thread kit for a jeans style

  1. Send the tech pack or a list of operations with the seam type.
  2. State the denim weight and the wash recipe (enzyme, stone, bleach, laser).
  3. Define the colours: contrast topstitching, tone-on-tone threads and the buttonhole colour.
  4. State the thickness in tex for each operation, or let us propose a kit.
  5. Calculate the quantities per operation and the number of garments in the run.
  6. Approve the washed sample before releasing production.

Denim thread from Polkom

Polkom is a manufacturer of denim threads and of metal accessories for jeans, with its own production in Sofia. We put together a thread kit by operation and colour, and for the other seams of your collection you can also browse our sewing threads. An OEKO-TEX® certificate is available for all products, and recycled versions are available on enquiry. Samples depend on the article; production takes 10–20 days after approval. Send your list of operations via a request for a quote.

Share this article

Gallery

From our production

FAQ

Frequently asked questions

Which thread is used for the double stitching on jeans?
For the visible double stitching on pockets, fly and hem, a core-spun polyester/cotton thread of around 60–120 tex in a contrasting colour is usually used. The cotton wrap lets the seam fade together with the fabric during washing. The exact thickness depends on the denim weight and the desired look – a heavier thread gives a more pronounced seam.
Why did the thread colour change after the jeans were washed?
In enzyme and stone washing, the cotton wrap of the thread is abraded and fades, and indigo from the fabric can stain light threads. Polyester threads hardly change their tone. That is why the colour is approved on a test piece washed with the same recipe as the production run, not on the shade card before washing.
Can one thread be used for all the seams on jeans?
Technically it is possible, but it is rarely a good solution. Joining seams and overlocking need a finer, very strong thread, while decorative stitching needs a heavier, visible one. With a single thread, either the decorative seams look faint or the joining seams become coarse. A kit of two to four threads is standard practice.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.