Contents
The folding type of woven labels determines how the label is sewn and how it looks on the garment. The main options are straight cut, loop fold (folded in half), end fold (folded ends), mitre fold (envelope fold), and combined folds. Neck labels are usually loop folded or end folded, while side seam labels often use loop fold or mitre fold.
Why the folding type of woven labels matters
Folding is not just about aesthetics. It addresses three practical concerns: whether the label edges will be visible and cause irritation, how long sewing takes in the factory, and how much of the label remains visible after sewing. Choosing the right fold saves time on the production line and makes the label more comfortable to wear.
Main folding types
| Fold type | Appearance | Sewing method | Typical placement |
|---|---|---|---|
| Straight cut | flat rectangle | stitched on all four sides | on fabric, pockets, external branding |
| Loop fold | folded in half | open end sewn into seam | neckline, side seam |
| End fold | both ends folded back | stitched on left and right edges | back neck yoke |
| Mitre fold | folded at 45° angle | bottom edge sewn into seam | side seam, hem |
| Manhattan / combined | ends folded and label folded in half | sewn into seam with clean edges | premium neck labels |
Straight cut
The label remains flat without folding. The edges must be sealed well—using ultrasound, hot knife, or laser—because they are exposed. It is sewn around the entire perimeter or only on the two short sides. This fold suits external labels on pockets, sleeves, bags, or labels applied with heat-activated adhesive.
Loop fold
The label is folded in half, and the two open ends are caught in the seam. This creates a small “flag” that hangs freely. It is the fastest sewing method because the label is inserted into the seam while sewing the neckline or side seam, without a separate operation.
Things to consider
- The visible part is only half the total length minus seam allowance.
- The logo is usually woven twice—once on each half—or on one side only, leaving the other blank or with different information.
- For T-shirts, the neck label may flip outward; if this is a concern, choose end fold.
End fold
The two short ends of the label are folded backward. The label is sewn with two short stitches on the left and right, usually on the back neck yoke. This keeps the label flat, prevents flipping, and avoids edges touching the skin. It is the preferred choice for shirts, dresses, blazers, and coats. It requires a separate sewing operation but looks cleaner.
Mitre fold
The label is folded at a 45° angle so both ends point in the same direction and are sewn into the seam. The label protrudes sideways at a right angle to the seam. It is used for side flags on trousers, skirts, underwear, and sportswear, sometimes also on hems. It helps display the logo visibly without opening the garment.
Combined folds
Premium neck labels use a fold where the ends are first folded, then the label is folded in half. The result is a flag without visible cut edges. Other combinations include loop fold with one folded end or special folds for labels sewn into two seams simultaneously.
How folding affects label size
When specifying size, distinguish between the total length before folding and the visible part after sewing. For loop fold with seam allowance of a few millimetres, the visible part is less than half the total length. For end fold, subtract the two folded ends from the total length. If you want a specific visible area for your logo, inform the manufacturer who will calculate the total length accordingly.
Which fold suits which garment
- T-shirts, sweatshirts – loop fold at the neck or end fold under the collar.
- Shirts, dresses, blazers – end fold.
- Trousers, leggings, underwear – loop fold or mitre fold in side seam.
- Hats – loop fold at the back seam or straight cut outside.
- Bags, backpacks – straight cut or loop fold in flap seam.
Folding and automation in production
In factories with larger batches, labels are often fed into machines from rolls or stacks with uniform orientation. If labels are folded unevenly, the operator wastes time adjusting them. Therefore, when ordering, specify how labels will be sewn—manually, semi-automatically, or automatically—and whether you prefer delivery by piece or by roll. The manufacturer will adapt folding and packaging to your process.
Sewing: practical tips
- Use thread matching the label base colour to hide stitches—choose from sewing threads.
- Leave free space between the logo and the seam line.
- For end fold labels, sew exactly on the fold, not over the logo.
- When combining with a composite label in one seam, place the woven label on top so the logo is visible.
Ordering woven labels with the right fold from Polkom
Polkom manufactures woven labels in all main folding and cutting types, according to your design and size. We will advise you on the most convenient fold for your models and production process. Send a request describing your garments and label placement.
Share this article














