Contents
Logo seal tags are strings with a plastic lock and a plate bearing your logo that attach the hang tag to the product. When ordering you decide five things: the shape of the plate, the logo technique, the colour of the string and plastic, the length of the string and where it will pass through the product. If these parameters are clear, the sample is usually approved first time.
Why logo seal tags rather than plain thread
The hang tag carries the price, size and brand story, but if it hangs on white thread or a plastic tag pin, the impression is lost before the customer even reads it. A branded seal tag visually finishes the hang tag and locks it at the same time – it cannot be moved to another product, and an unbroken seal shows the item has not been worn. For online shops this is a practical tool when processing returns.
The seal tag is a small item, but it is seen at every contact with the product – on the shelf, in the online shop photo and when unpacking. So it is worth designing it with the same care as the hang tag.
Step 1: plate shape
| Shape | Look | Suitable for |
|---|---|---|
| Round (disc, button) | Compact, classic | Shirts, knitwear, lingerie, accessories |
| Rectangular plate | More room for a logo or monogram | Denim, outerwear, bags, footwear |
| Oval or custom outline | Recognisable, "signature" | Brands with a strong graphic mark |
| Clip tie | Minimalist, functional | Large runs, fast attachment |
The plate size should suit the hang tag: a small seal on a large card tag looks lost, while a large plate on a small tag overshadows it.
Step 2: logo technique
- Embossed (raised logo) – tactile and visible in any light, without ink.
- Debossed logo – more discreet and elegant, suitable for minimalist brands.
- Print – when the logo has several colours or fine elements that relief cannot reproduce.
On a very small plate, simplify the logo to a mark or initials – a long brand name in a few millimetres becomes illegible.
Step 3: colour and material
The colour of the plastic and the string is matched to Pantone or a sample. There are three proven approaches:
- Tone on tone with the hang tag – a calm, cohesive look.
- Corporate accent – the seal is in the brand colour and is recognised immediately.
- Metallic effect – silver, gold or graphite matching the product's buttons, eyelets and rivets.
The string is most often polyester, solid or twisted. If you want a natural look, ask about cotton versions too, and for ties without a lock see the cords.
Step 4: string length
The length is set by the distance between the attachment point and where the tag should hang. Too short a string pulls the fabric and twists the tag; too long a string lets the tag spin and hang below the edge of the garment. The safest approach is to hang the tag with thread on a real product, measure, and add a little extra for the lock.
Step 5: where the string passes
| Product | Recommended point | Note |
|---|---|---|
| Shirt, blouse | Buttonhole or neck label | Don't pierce the fabric |
| Jeans, trousers | Belt loop | Tag at the back |
| Jacket, coat | Zip slider, buttonhole or neck hanger loop | The string must not scratch the face fabric |
| Knitwear, lingerie | Neck label or side seam | Choose a soft string |
| Footwear | Lace eyelet or back loop | Shorter string |
| Bag | Handle or ring | A metallic effect suits the metal accessories |
The rule is simple: the string passes through an existing opening, not through the fabric. So once it is cut, no mark is left on the product.
Attaching in production
Seal tags are attached by hand without tools, so it is important to plan who will attach them and when – in the factory after pressing and folding, in the warehouse on receipt of goods, or in the shop. If attachment happens in a high-volume warehouse, clip ties and seals with a larger socket speed up the work. It is best to attach the seal after the garment has had its final inspection: once closed, it can only be removed by cutting, and is then lost.
Common mistakes
- The hang tag hole is too small for the plate or string and the card tears when attaching. Plan the hole, and for thin card use an eyelet or reinforcement.
- A string that frays at the end because it isn't sealed, and is hard to insert into the lock.
- A dark string on light garments – rubbing in the carton can leave a mark on delicate fabrics.
- Too fine a logo on a small plate, which becomes indistinct after moulding.
- A different shade on the seal and the hang tag, because they were ordered separately without a shared sample.
What to include in your inquiry
- The logo in vector format (AI, PDF, SVG).
- The shape and approximate size of the plate.
- The technique – embossing, debossing or print.
- The colours of the plastic and string to Pantone or a sample.
- The string length and the type of products.
- A photo or the size of the hang tag it will be used with.
- An approximate quantity.
See all options in the seal tags category.
Seal tags from Polkom
Polkom is a Bulgarian company from Sofia with over 30 years of experience as a manufacturer of accessories for fashion, furniture, footwear and bags. We make custom logo seal tags and can design them together with the hang tags so both elements share one look. Minimum quantities depend on the article. Send an inquiry with your logo and the parameters above.
Share this article














