Sewing Threads 120 – What the Cone Number Means and How to Choose Thickness

Polkom · 4 min read
Sewing Threads 120 – What the Cone Number Means and How to Choose Thickness

Sewing threads 120 refer to threads with ticket number 120 – the most versatile thickness for garment sewing. The number is an inverse measure: the higher the number, the finer the thread. Ticket 120 corresponds roughly to 25–30 tex for polyester threads and is used with needle size Nm 70–90 for shirts, dresses, blouses, trousers, knitwear, and overlock machines.

What the cone number means

The cone number is a commercial designation of thickness. The ticket number (Tkt) originates from the metric yarn numbering system and reflects the number of yarns in the thread. For the sewer, the key point is: a higher number means a finer thread, and a lower number means a thicker thread. Thus, thread 40 is significantly thicker than thread 120, while 180 is finer.

Note: the ticket number is not fully universal. Different manufacturers and thread types (spun, core-spun, filament) with the same number may have slightly different actual thicknesses. For precise comparison, check the tex value on the label, which indicates the weight in grams per 1000 meters of thread.

What else is on the cone label

Besides the number, the industrial cone label usually includes:

  • Type and fibre – e.g., 100% polyester, core-spun, cotton;
  • Ticket number and/or tex – thickness;
  • Length – meters of thread on the cone;
  • Colour code – manufacturer’s colour number;
  • Dye lot – important when reordering the same colour;
  • Recommended needle size – from some manufacturers.

Record all these details in the technical sheet of your product. This ensures you get the exact same thread next time, not just “something similar”.

Sewing threads 120: typical uses

Ticket 120 balances strength and fine appearance, making it the standard in most sewing workshops. It is suitable for:

  • shirts, blouses, and dresses made of cotton, viscose, and blended fabrics;
  • trousers and skirts from medium-weight fabrics;
  • t-shirts, sweatshirts, and all kinds of knitwear – for overlock and coverstitch needles;
  • bedding, tablecloths, and curtains;
  • hemming linings and internal seams of jackets.

When to choose a different thickness

TicketApprox. tex (polyester)Needle (Nm)Use
180–15016–2060–70Silk, chiffon, lingerie, fine shirts
12025–3070–90Most garments, knitwear, overlock
10030–3580–90Heavier shirts, workwear
80–7535–4090–100Denim, jackets, coats, bags
50–4060–70100–110Decorative seams, upholstery
30–2080–120110–130Visible seams, tarpaulin, leather

Values are approximate and depend on thread type and manufacturer. For a detailed comparison of tex, ticket, and Nm systems, see our article on thread numbering. Here, we focus on practical selection.

Finer thread (150–180)

Choose this when the seam must be almost invisible, the fabric is thin and prone to puckering, or you sew lingerie. Fine threads require thin needles and shorter stitches. However, strength is reduced on heavily stressed seams.

Thicker thread (100–75)

Needed when the fabric is dense, the seam carries load, or the garment is frequently washed at high temperatures. For denim and workwear, core-spun construction is often combined.

How to check if the thickness is correct

  1. The seam does not pucker the fabric and lies flat.
  2. The thread does not rub or fray in the needle eye.
  3. When stretching the seam, the fabric tears later than the thread, but the thread does not cut the fabric.
  4. Stitches are even, with no skips at full speed.
  5. The visible seam matches the design – neither too thin nor too coarse.

Different upper and lower thread numbers

In the industry, it is common for the upper thread to be ticket 120 and the lower thread finer, e.g., 150 or 180. This allows the bobbin to hold more thread and reduces changes, while the seam remains strong enough for most garments. For heavily stressed seams, use the same number top and bottom, as seam strength depends on the weaker thread.

Common mistakes when choosing thread number

  • Comparing ticket numbers across different thread types without checking tex.
  • Choosing a thicker thread for “more strength” – often causes puckering and piercing of thin fabrics.
  • Not changing the needle when changing thread number.
  • Ordering by number only, without fibre and colour – “thread 120” is not a full specification.

If you work with natural fibres and want 100% cotton thread, see our cotton threads, which have their own numbering and slightly different behaviour.

Thread number and consumption

Thickness also affects how many metres you get per cone. Finer thread yields more metres per cone of the same weight, thicker thread fewer. Also, the stitch type matters more than the number: overlock and chain stitches consume many times more thread than a straight lockstitch. When planning an order, calculate consumption per product operation and add allowance for adjustments and breakages. This helps you choose the right cone size and avoid reorders from different dye lots.

Thread number for hand sewing and repairs

For sewing on buttons, bartacks, and hand repairs, the same 120 thread is often used. For coat and jacket buttons, it is better to choose thicker thread (80–40) to withstand pulling. For invisible hand hems on fine fabrics, a finer number is preferred that does not show on the front.

Sewing threads 120 and other thicknesses from Polkom

Polkom manufactures and delivers sewing threads wholesale in the most used thicknesses – from fine threads for lingerie to thick threads for decorative seams, in a wide range of colours. As a Bulgarian manufacturer of garment accessories, we help you choose the right number, type, and needle for every fabric. See also all threads or send an inquiry with your fabric and machines via Contacts.

Share this article

Direct from the manufacturer

Related products

Direct from the manufacturer – samples and production to your design, colour and logo

Request a quote Request a sample
Gallery

From our production

FAQ

Frequently asked questions

Is thread 120 thinner than thread 80?
Yes. In ticket numbering, a higher number means finer thread. Thread 120 is thinner than thread 80, and thread 80 is thinner than thread 40. This often confuses beginners because needle sizes work oppositely – a higher needle number means a thicker needle. Therefore, thicker thread requires a needle with a higher number.
What needle size should I use with thread 120?
Sewing threads 120 typically use needle size Nm 70–90, corresponding to US sizes 10–14. For fine fabrics, choose 70–75; for medium weight, 80; for heavier fabrics, 90. For knitwear, use a ballpoint or stretch needle to avoid skipped stitches and damage to loops.
Is sewing thread 120 suitable for overlock?
Yes, ticket 120 is the most used thickness for overlock needles and often for loopers on woven fabrics. For knitwear, lingerie, and sportswear, loopers usually use textured thread, which is softer and more elastic. For very fine knits, you can choose a finer number, like 150 or 180.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.