Contents
The sizes of rings are specified by the inner measurement – the clear opening through which the belt passes. For D-shaped and rectangular rings, this is the inner width of the straight side, while for round rings it is the inner diameter. The inner measurement should equal the belt width plus a small allowance for its thickness; the wire thickness is specified separately.
Main ring sizes and how to measure them
When ordering rings, the following parameters are usually used, all in millimetres:
- Inner width (W) – for D-shaped, rectangular, and triangular rings: the clear length of the straight side.
- Inner diameter (ID) – for round rings: the opening at its widest point.
- Outer diameter or width – the overall dimension, important for design and packaging.
- Inner depth – for D-rings: the distance from the straight side to the curve.
- Wire thickness or cross-section – determines strength and visual weight.
Why the inner, not the outer measurement
Two rings with the same outer diameter can have different openings if one is made from thicker wire. For the belt, only the clear opening matters. Therefore, always specify in your order whether the size is inner or outer – this is the most common cause of misunderstandings between manufacturer and buyer.
How to measure yourself
- Use calipers, not a ruler. For small sizes, a 1 mm difference is significant.
- Measure inside, between the inner edges of the wire.
- For a D-ring, measure the straight side; for a round ring, measure two perpendicular diameters to check if the ring is truly round or slightly oval.
- Measure the wire thickness where there is no seam.
- Note the profile shape – round, flat, or beveled.
How much allowance to leave for the belt
The belt is not infinitely thin. When folded around the ring and sewn, two layers of material enter the opening, and the edges may be folded or stitched. Therefore:
- For thin woven ribbons and grosgrain, the allowance is minimal – the ring is as wide as or just slightly wider than the ribbon;
- For dense straps used in backpacks and belts, leave a bit more space to prevent bunching in the corners;
- For leather belts with folded edges, the allowance is largest because leather is stiff and does not compress.
The safest method is to measure the finished belt – including folds and seams – and check a sample ring with it.
Most popular ring sizes
| Inner width | Suitable belt | Typical application |
|---|---|---|
| around 10–15 mm | Narrow ribbons, cords, thin leather straps | Wallets, jewellery, dress belts |
| around 20 mm | Ribbons and belts about 20 mm wide | Ladies’ bags, collars for small dogs |
| around 25 mm | Ribbons about 25 mm wide | Shoulder bags, textile belts, backpacks |
| around 30 mm | Belts and straps about 30 mm wide | Belts, sports bags |
| around 40 mm | Wide belts and straps | Men’s belts, shopping bags |
| around 50 mm | Wide ribbons | Travel and tactical bags, harnesses |
The table is indicative. The exact size depends on the thickness and stiffness of the specific belt.
Size and proportions of the product
Size is not only a technical but also a visual decision. A small ring on a large bag looks accidental, while a massive ring on a delicate dress weighs it down. In fashion products, designers often choose thicker wire or a flat profile to highlight the ring without changing the belt width. For belts, ring size is usually coordinated with the buckle, and for straps – with the width of the ribbon.
Size of split rings for keychains
Keychain rings are measured differently – usually by outer diameter, with width and thickness of the flat wire specified separately. There is no belt allowance here, but it is important how many keys or charms the ring must hold and how easily it opens. Thicker wire holds more securely but is harder to open.
Wire thickness – how to choose
Wire thickness is rarely mentioned, but it determines both strength and character of the ring. Thin wire looks delicate and suits dresses, lingerie, and small accessories. Medium thickness is standard for ladies’ bags and textile belts. Thick wire and solid moulded profiles are chosen for men’s belts, backpacks, and work or military-style products. The ratio between wire thickness and belt width should look natural – if in doubt, compare two samples on the actual product.
Permissible deviations
In mass production of rings, small size deviations occur, especially in wire-bent models. If the belt fits the ring exactly, even a small deviation can make some rings unusable. Therefore, size allowance is not only for convenience but also for production stability. When ordering to drawing, specify which sizes are critical and what tolerance you accept.
How to specify size in an inquiry
To get an accurate quote, specify:
- ring shape;
- inner width or inner diameter in mm;
- wire thickness or desired profile;
- belt material and its thickness;
- finish and approximate quantity.
If you have a ready ring or belt, the easiest way is to send a sample or photo with calipers next to it.
Rings by size from Polkom
Polkom is a Bulgarian manufacturer of haberdashery and accessories for fashion, furniture, footwear, and bags with over 30 years of experience. We offer rings in a wide range of sizes and shapes and can produce custom sizes to your drawing if needed. Samples are prepared quickly, and delivery is across the EU. Send an inquiry with your sizes, and we will prepare an offer.
Share this article














