Snap Hooks for Bags, Belts and Leads – Types and Sizes

Polkom · 4 min read

Snap hooks for bags are the metal hooks with a spring gate that connect the shoulder strap or handle to the bag and allow quick release. The main types are swivel snap hooks, trigger snap hooks, lobster clasps, double hooks, flat snap hooks and screw-lock carabiners. The size is chosen by the strap width: the inner width of the eye should equal it or be 1–2 mm larger.

How a snap hook is built

Every snap hook has three main parts: the body, the gate and the ring or eye for the strap. The body takes the load, the gate opens with a finger and closes by itself under spring action, and the eye takes the strap. Swivel models have a joint between the body and the eye that lets the strap turn without twisting. Quality shows in smooth opening, the strength of the spring and whether the gate sits tight with no play. Smooth inner edges on the eye also matter, because the strap constantly rubs against them and a sharp edge would wear it through over time.

Types of snap hooks for bags, belts and leads

Swivel snap hook

The classic for shoulder straps on women's and men's bags. The eye can be rectangular, triangular, round, oval or D-shaped. The swivel keeps the strap from twisting while the bag is carried.

Trigger snap hook

The gate is pulled back with the thumb and returned by a spring. It is used on pet leads, keyrings, luggage straps and heavier items.

Lobster clasp

Small, with a curved gate that resembles a claw. Suitable for purses, mini bags, keyrings and jewellery accessories.

Double hooks

Double-ended hooks and S-hooks have a gate at both ends and connect two elements at once – for example two rings, or a strap and an eye.

Flat snap hooks

With a wide, flat body that lies close against the leather. They are preferred on bags where the metal parts are part of the design.

Screw-lock carabiners and tactical hooks

The screw sleeve locks the gate and prevents accidental opening. They are used on backpacks, gear and outdoor products.

Spring gate rings

Round rings that open and hook directly onto a strap, eye or another ring. They give a simple, modern look.

Snap hooks for bags – size by strap width

The size of the snap hook is determined by the strap that passes through its eye. Measure the strap width in millimetres and choose an eye with the same or a slightly larger inner width. If the eye is narrower, the strap bunches up; if it is much wider, the strap slides sideways and looks untidy.

Strap widthTypical use
10–15 mmpurses, mini bags, keyrings, lanyards
20–25 mmwomen's bags, thin shoulder straps, leads for small dogs
30–40 mmmen's bags, laptop bags, backpacks, wide leads

Besides the width, also check the strap thickness: dense leather or double webbing needs an eye with enough inner height.

Materials and finishes

Snap hooks for bags and accessories are most often die-cast from zinc alloy. This technology allows precise shapes, a smooth surface and a high-quality electroplated finish. For items exposed to moisture and salt, stainless steel or brass is used. Finishes include gold, rose gold, antique brass, gunmetal, black and matt coloured coatings. All Polkom metal finishes are nickel free.

What load capacity depends on

The strength of a snap hook is not determined by its size alone. It depends on:

  • the material and thickness of the body;
  • the cross-section at the narrowest point, usually around the gate;
  • the quality of the swivel joint on swivel models;
  • the strength and material of the spring;
  • the type of load – constant, or with pulling and jolts.

For heavy bags, backpacks and leads for large dogs, choose a model with a more solid body and test a sample on the actual product. Snap hooks for fashion accessories are not intended for climbing, lifting or securing people.

Common mistakes when choosing snap hooks

  • the eye is chosen from a photo, without measuring the actual width and thickness of the strap;
  • a fine model intended for small accessories is chosen for a heavy bag or backpack;
  • the snap hooks and rings on the bag come from different series and the finishes do not match in tone;
  • nobody checks how the gate opens with one hand when the bag is full;
  • a sample test with the actual strap and the actual weight of the product is skipped.

These mistakes are easy to avoid: in your inquiry, send the width and thickness of the strap, the type of product and a photo of the design, and test the sample on a finished bag before the production run.

Snap hooks for lanyards and keyrings

Small snap hooks are also used on textile lanyards for keys, badges and phones, and on keyrings. Here the gate needs to open easily with one hand, and the finish must withstand constant rubbing against keys and metal objects.

Bag set – snap hooks, rings and buckles

A bag usually has snap hooks, rings, an adjuster and sometimes a decorative buckle. For a unified look, order them in one finish: rings to attach the strap to the body of the bag and bag buckles to adjust the length.

Snap hooks and carabiners from Polkom

Polkom is a manufacturer of accessories for fashion, footwear and bags with over 30 years of experience. In the snap hooks and carabiners category you will find models for straps from 10 to 40 mm in many finishes, and to order we make snap hooks in non-standard sizes, colour-matched to a sample or with an engraved logo. All products are OEKO-TEX® certified. Minimum quantities depend on the item. Send the strap width and the desired finish via the contact page.

Share this article

FAQ

Frequently asked questions

Carabiner or snap hook – is there a difference?
In haberdashery both words are used for the same part – a metal hook with a spring gate for bags, belts and leads. Polkom's categories group them together as snap hooks and carabiners, and in everyday speech either term is common. What matters in an inquiry is stating the gate type, the eye and the strap width.
Can a snap hook carry a logo?
Yes. The logo can be engraved or raised on the body of the snap hook, and on some models on the back or the eye as well. A new shape or non-standard size requires a tool. Send the logo as a vector file, the strap width and the desired finish to receive a sample and a quote.
Why does the snap hook on a bag come undone by itself?
The most common causes are a weakened spring, a gate that does not sit tight in the body, or a snap hook too small for the load. Sometimes the ring on the bag is too thin and slips through the gap of the gate. The solution is a model with a stronger spring, a more solid body or a screw lock, chosen to suit the weight of the bag.
Custom offer
Looking for a specific model, colour or size?

Send us an inquiry with a description or photo – you will receive an offer, samples and a production lead time.